Forward All Incoming Calls on SPA525G or SPA525G2 IP Phones

Available Languages

Download Options

  • PDF     (101.0 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (119.2 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (160.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:August 17, 2017
Document ID:SMB2099

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Forward All Incoming Calls on SPA525G or SPA525G2 IP Phones

Objectives

An IP phone can be configured to forward all incoming calls to another extension number.

This document explains how to forward all calls on SPA525G and SPA525G2 IP Phones.

Applicable Devices

• SPA525G IP phone
• SPA525G2 IP phone

Step-by-Step Procedure

Forward All Incoming Calls on IP Phone

Step 1. Press CFwdAll to setup call forwarding.

Note: If CFwdAll is not shown, press More until the tab shows up.

Step 2. Enter the extension number that all incoming calls will be forwarded to.

Step 3. Press EndCall to begin forwarding all calls to the inputted extension number.

Step 4. Press CFwdAll to turn off call forwarding when it is no longer needed.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco