PDF(246.1 KB) View with Adobe Reader on a variety of devices
ePub(282.0 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(166.8 KB) View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
VPN Status on SPA525G or SPA525G2 IP Phones
This document showcases the procedure for checking the VPN Status on the SPA525G/SPA525G2 IP Phones. The VPN Status information can be used to verify if the VPN is properly connected. This can be done by looking at parameters like number of bytes sent or number of bytes received etc.
• SPA 525G • SPA 525G2
Step 1. Press the Setup button on the phone. The Information and Settings menu appears.
Step 2. Use the navigation keys and scroll down to Status. Press the Select softkey. The Status menu appears.
Step 3. Use the navigation keys and scroll down to VPN Status. Press the Select softkey. The VPN Status menu appears.
The fields are explained as follows.
• VPN Connected — This field notifies if the VPN is connected or not. If the VPN is connected, then the value of this field will be Yes. This field will have the value as No if the VPN is not connected.
• IP Address — This field will display the IP address assigned by the VPN Server. • Subnet Mask — This field will display the corresponding subnet mask of the IP address assigned by the VPN Server.
• Bytes Send — This field will show total number of bytes sent from the SPA525G/SPA525G2 to VPN Server.
• Bytes Recv — This field will show total number of bytes received from the VPN Server to the SPA525G/SPA525G2.
Step 4. The Refresh softkey can be pressed to reset the VPN connection. To go back to the previous Status menu press the Back softkey.