Cisco Cyber Vision Center Appliance Installation Guide, Release 5.5.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 9, 2025

Chapter: About this documentation

About this documentation
Supported Cisco UCS and upgrade procedures
Warnings and notices

About this documentation

Supported Cisco UCS and upgrade procedures

The installation guide covers these Cisco Unified Computing systems:

Cisco Unified Computing C220 M5
Cisco Unified Computing C225 M6
Cisco Unified Computing C225 M8

View these notes about hardware lifecycles before you begin.

Older hardware generations, such as M5 and M6, are phased out. This maintains performance and security standards.


Hardware	Last day to order
UCS C220 M5	December 31, 2023. For more information, see End-of-Sale and End-of-Life Announcement for the Cisco Cyber Vision Center, M5 series appliance.
UCS C225 M6	June 18, 2026. For more information, see End-of-Sale and End-of-Life Announcement for the Cisco Cyber Vision Center on UCS M6 series appliance.

The M8 series UCS serves as the current, supported platform for the Cyber Vision Center physical appliance.

Use this guide to find upgrade procedures for:

Architectures with a Global Center
Architectures with one Center only

Warnings and notices

This manual contains notices you have to observe to ensure your personal safety as well as to prevent damage to property.

The notices referring to your personal safety and to your property damage are highlighted in the manual by a safety alert symbol described below. These notices are graded according to the degree of danger.

Warning

Indicates risks that involve industrial network safety or production failure that could possibly result in personal injury or severe property damage if proper precautions are not taken.

Important

Indicates risks that could involve property or equipment damage and minor personal injury if proper precautions are not taken.

Note

Indicates important information on the product described in the documentation to which attention should be paid.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)