show sx peers

This chapter provides show sx peers command output tables.

show sx peers full address <ip_address>

Table 1. show sx peers full address statistics Command Output Descriptions
Field Description

Peer IP

The IP address of the Sx peer.

Sx Service Id

The identification number of the service configured on the system that is currently facilitating the Sx service.

Group Name

The name of the protocol monitoring group.

Current Session

The total number of sessions that are currently facilitating the Sx service.

Max Session

The maximum number of sessions that are facilitating the Sx service.

Negotiated feature

Load Control

The load control information, if configured.

Overload Control

The overload control information, if configured.

Load Control Information

Load Sequence Number

The current unique sequence number that is sent to the Sx peer along with the load control information element.

Load Metric

The load metric configured on the Sx peer node. This metric is sent to the Sx peer node for load balancing purposes.

Overload Control Information

Overload Sequence Number

The current unique sequence number that is sent to the Sx peer along with the overload control information element.

Overload Reduction Metric

The overload reduction metric configured on the Sx peer node. This metric is sent to the Sx peer node for load balancing purposes.

Overload Validity Timer

The currently configured validity period. This value indicates how long the overload control information is considered valid.

Monitor Group Information

Monitor Group name

The configured protocol monitoring group name.

Monitor State

The configured protocol monitoring state.

The "Monitor State" shows the default state as “U” for UP, “D” for Down, and “N” for Not Applicable.

show sx peers wide

Table 2. show sx peers wide statistics Command Output Descriptions
Field Description

Node Type

The configured type of the Sx peer node.

Peer Mode

The current status of the Sx peer node.

Association State

The current state of the Sx peer association.

Configuration State

The configuration status of the Sx peer node.

IP Pool

The configured state of the IP pool.

Push Config Status

The IP pool chunk push configuration status.

Monitor State

The configured protocol monitoring state.

The "Monitor State" shows the default state as “U” for UP, “D” for Down, and “N” for Not Applicable.