Outlines the complete process for installing an access point, including preparation, configuration, physical mounting, cabling, grounding, powering, and network deployment, with guidance for both Cisco Catalyst and Meraki modes and multiple installation scenarios.
Prepare and configure the AP
Introduces preparation and configuration steps for the access point, covering package contents, unpacking procedures, available Cisco orderable accessories, and detailed preinstallation configuration for both Cisco Catalyst and Meraki modes, including controller discovery, guidelines, and optional setup procedures.
Mount the AP
Explains mounting procedures for the access point using multiple brackets and orientations, including articulating, vertical, horizontal, and strand mounting, with step-by-step tasks for pole, wall, and ceiling installations, cabling, accessory fitting, and mounting under specific conditions.
Network deployment
Details physical installation and deployment procedures, including grounding, powering, and preinstallation configuration for both Cisco Catalyst and Meraki modes, as well as deploying the access point onto a wireless network.