Guest

Support

Cisco 300 Series

Hierarchical Navigation

Displaying the System Summary

To view system information, click Status and Statistics > System Summary.

The System Summary page contains system and hardware information.

System Information:

  • System Description—A description of the system.
  • System Location—Physical location of the device. Click Edit to go the System Settings page to enter this value.
  • System Contact—Name of a contact person. Click Edit to go the System Settings page to enter this value.
  • Host Name—Name of the device. Click Edit to go the System Settings page to enter this value. By default, the device hostname is composed of the word device concatenated with the three least significant bytes of the device MAC address (the six furthest right hexadecimal digits).
  • System Uptime—Time that has elapsed since the last reboot.
  • Current Time—Current system time.
  • Base MAC Address—Device MAC address.
  • Jumbo Frames—Jumbo frame support status. This support can be enabled or disabled by using the Port Settings page of the Port Management menu.

    • NOTE     Jumbo frames support takes effect only after it is enabled, and after the device is rebooted.

TCP/UDP Services Status:

  • HTTP Service—Displays whether HTTP is enabled/disabled.
  • HTTPS Service—Displays whether HTTPS is enabled/disabled.
  • SNMP Service—Displays whether SNMP is enabled/disabled.
  • Telnet Service—Displays whether Telnet is enabled/disabled.
  • SSH Service—Displays whether SSH is enabled/disabled.

Other Summary Information:

  • Model Description—Device model description.
  • Serial Number—Serial number.
  • PID VID—Part number and version ID.
  • Firmware Version (Active Image)—Firmware version number of the active image.
  • Firmware MD5 Checksum (Active Image)—MD5 checksum of the active image.
  • Firmware Version (Non-active Image)—Firmware version number of the non-active image.
  • Firmware MD5 Checksum (Non-active Image)—MD5 checksum of the non-active image.
  • Boot Version—Boot version number.
  • Boot MD5 Checksum—MD5 checksum of the boot version.
  • Locale—Locale of the first language. (This is always English).
  • Language Version—Language package version of the first or English language.
  • Language MD5 Checksum—MD5 checksum of the language file.

PoE Power Information:

  • Maximum Available PoE Power (W)—Maximum available power that can be delivered by the PoE.
  • Total PoE Power Consumption (W)—Total PoE power delivered to connected PoE devices.
  • PoE Power Mode—Port Limit or Class Limit.