Outlines the principles and configuration steps for implementing Network Edge Access Topology using 802.1x supplicant and authenticator switches, and provides guidelines, limitations, and verification methods for secure network access deployment.
802.1x supplicant and authenticator switches with network edge access topology
Explains how 802.1x supplicant and authenticator switches operate with Network Edge Access Topology (NEAT) to extend identity and secure access outside the wiring closet.
Guidelines and limitations for NEAT configuration
Outlines important guidelines and limitations to consider when configuring and using NEAT, including supported port types, required servers, and feature compatibility. Review these points to ensure proper deployment and avoid configuration conflicts.
Configure an authenticator switch with NEAT
Configure an authenticator switch with NEAT to enable secure network access for devices outside the wiring closet. This process ensures that the switch acts as an authenticator and supports dynamic trunking after successful authentication.
Configure a supplicant switch with NEAT
Configure a switch as a supplicant using NEAT. This task enables authentication and trunking for secure network access.
Configuration verification
Lists show and debug commands to verify information about Client Information Signalling Protocol (CISP) and Network Edge Access Topology (NEAT) configuration.
Feature History
Describes the initial support for Network Edge Access Topology (NEAT) in Cisco IOS XE 17.8.1, enabling enhanced network edge access and topology management features for supported platforms.