Technical Specifications

Technical Specifications

This appendix provides the technical specification for the Cisco Catalyst IE3400 Heavy Duty Series switches.

Operating Temperature Specifications

The following table lists the operating temperatures for the Cisco Catalyst IE3400 Heavy Duty Series switches in three different environments.

Table 1. Operating Temperature for the Cisco Catalyst IE3400 Heavy Duty Series switches

Industrial Automation and Other Locations Requiring Enclosures

Substation

Traffic Signal

Enclosure types

Sealed enclosures

For example: NEMA4, NEMA4X, NEMA12, NEMA13, IP54, and IP66.

Vented enclosures

For example: NEMA1, IP66, and IP67.

Fan or blower-equipped enclosures

For example: NEMA TS-2.

Note 
The minimum airflow is 200 lfm1.
1 lfm = linear feet per minute.

Note
The safety certifications apply only to ambient temperatures under 140°F (60°C). However, the Cisco Catalyst IE3400 Heavy Duty Series switches can function in the substation and traffic signal installations under the environmental conditions shown in the following table.

Technical Specifications

The technical specifications for the Cisco Catalyst IE3400 Heavy Duty Series switches are as follows:

Table 2. Cisco Catalyst IE3400 Heavy Duty Series Technical Specifications

Environmental Ranges

Storage temperature

–40 to 185°F (–40 to 85°C)

Operating temperature

(measured inside enclosure, 1” below the bottom surface of the switch)

–40 to 167°F (–40 to 75°C)

Caution 

Operating temperatures exceeding 60C are not covered by the product safety certifications and approvals.

  • -40C to +70C (Vented Enclosure Operating)

  • -40C to +60C (Sealed Enclosure Operating)

  • -34C to +75C (200 LFM or more Fan or Blower equipped Enclosure Operating)

  • -40C to +85C (Type Tested to +85C for 16 hours)

Operating humidity

5 to 95% (noncondensing)

Ingress Protection/Type Ratings

IP66 and IP67 Rated for protection against dust and submersion in water

NEMA type 4x

Caution 

IP66 and IP67, NEMA type 4x compliant only when all IP67 cables are mated and torqued appropriately or with the supplied dust caps attached.

Operating altitude

Up to 15,000 feet (4570 meters)

Storage altitude

Up to 40,000 feet (4570 meters)
Table 3. Power Specifications

Power Specifications

IE-3400H-8FT

IE-3400H16FT

IE-3400H-24FT

IE-3400H-8T

IE-3400H-16T

IE-3400H-24T

Marked Input voltage range

12 to 48VDC

12 to 48VDC

12 to 48VDC

12 to 48VDC

12 to 48VDC

12 to 48VDC

Input voltage range (Absolute)

9.6 to 60VDC

9.6 to 60VDC

9.6 to 60VDC

9.6 to 60VDC

9.6 to 60VDC

9.6 to 60VDC

Input current @ (9.6V / 60V)

3.0A/0.51A

4.0A/0.65A

4.6A/0.75A

3.2A/0.54A

4.4A/0.71A

5.1A/0.83A

Power consumption @ (9.6V / 60V)

28.8W/30.6W

38.4W/39.0W

44.2W/45.0W

30.4W/32.2W

41.6W/42.3W

49.0W/49.8W
Table 4. Physical Configurations

Physical Specifications

IE-3400H-8FT

IE-3400H-8T

IE-3400H16FT

IE-3400H-16T

IE-3400H-24FT

IE-3400H-24T

Dimensions (H x W x D)

9.58 x 7.90 x 3.15 in.

24.33 x 20.07 x 8.00 cm

9.58 x 7.90 x 3.15 in.

24.33 x 20.07 x 8.00 cm

9.58 x 10.90 x 3.15 in.

24.33 x 27.69 x 8.00 cm

9.58 x 10.90 x 3.15 in.

24.33 x 27.69 x 8.00 cm

9.58 x 13.90 x 3.15 in.

24.33 x 35.31 x 8.00 cm

9.58 x 13.90 x 3.15 in.

24.33 x 35.31 x 8.00 cm

Weight (including mounting bracket)

8.45 lb

4.35 kg

8.45 lb

4.35 kg

11.25 lb

5.10 kg

11.25 lb

5.10 kg

13.90 lb

6.30 kg

13.90 lb

6.30 kg

Mounting

Wall mount

Wall mount

Wall mount

Wall mount

Wall mount

Wall mount

Connectors and Cabling

The connectors and cabling for the Cisco Catalyst IE3400 Heavy Duty Series switches are below.

Table 5. Cisco Catalyst IE3400 Heavy Duty Series Cables and Connectors

Data Ports

  • Copper 100 Base-T M12 D coded 4 pole (pin) cable: M12 Male and/or M12/RJ-45 connector

  • Copper GE M12 X coded 8 pole (pin) shielded cable: M12 Male and/or M12/RJ-45 connector

Alarm Port

  • Copper M12 A-Coded 5 Pin connector

Power Input

  • Mini Style 4-pin connector for power input

Console Cable:

CAB-CONSOLE-M12=

  • Console Cable 6ft with M12 and DB9F for IE3400H Switch

Torque Specifications

The torque specifications for the Cisco Catalyst IE3400 Heavy Duty Series switches are below.

Table 6. Cisco Catalyst IE3400 Heavy Duty Series Torque Specs

Alarm, Console, Ethernet ports (M12 Connectors)

  • 4.43 to 7.08 in-lbs (0.5 to 0.8 Nm)

M12 Connector Dust Cap (Alarm, Console, Ethernet ports)

  • 3.5 in-lbs (0.4 Nm)

Power Supply Connector (Mini-Change)

  • 10 in-lbs (1.13 Nm)

SD Card Access Door Captive Screws

  • 15.93 to 19.47 in/lbs (1.8 -2.2Nm)

Alarm Ratings

The alarm ratings for the Cisco Catalyst IE3400 Heavy Duty Series switches are below.

Table 7. Cisco Catalyst IE3400 Heavy Duty Series Alarm Ratings

Alarm Ratings

Specification

Alarm

One alarm output relay using an M12 A Coded 5 Pin connector (Max. rated: 24VDC @ 1A / 48VDC @ 0.5A)