New and Changed Information
The following table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Unicast Routing Configuration Guide, Release 9.2(x) and tells you where they are documented.
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
|
Changed the document title from 9.x to 9.2(x) |
Title page |
||
| Balancing Policy-based Routing Traffic | Added support for balancing policy-based routing traffic on N9K-C9372TX, N9K-X9564TX and N9K-X9732C-EX switches. |
9.2(3) |
|
|
BGP |
Added RFC 5549 support for Cisco Nexus 9500 platform switches with -R line cards. |
9.2(2) |
|
|
BGP best-path algorithm |
Added the option to ignore the Interior Gateway Protocol (IGP) metric for next hop during best-path selection. |
9.2(2) |
|
|
BGP path selection in route maps for advertising BGP additional paths to peers |
Added the ability to specify backup paths, the second best path, or multipaths as advertised paths. |
9.2(2) |
|
|
BGP PIC edge |
Introduced this feature for Cisco Nexus 9200, 9300-EX, 9300-FX, 9300-FX2, and 9300-FXP platform switches and Cisco Nexus 9500 platform switches with -EX, -FX, and -R line cards. |
9.2(2) |
|
|
Policy-based routing |
Added the ability to drop packets when the configured next hop becomes unreachable, when setting the IPv4 or IPv6 next-hop address, for Cisco Nexus 9200, 9300-EX, 9300-FX, 9300-FX2, and 9364C platform switches and Cisco Nexus 9500 platform switches with -EX and -FX line cards. |
9.2(2) |
|
|
VRRPv3 |
Added support for object tracking |
9.2(2) |
VRRPv3 Object Tracking section |
|
Multi-hop BFD |
Introduced support for this feature. |
9.2(1) |
|
|
Weighted ECMP |
Added support for Cisco Nexus 9332PQ, 9396PX, and 9396TX switches. |
9.2(1) |
Feedback