New and Changed Information
This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Interfaces Configuration Guide and where they are documented.
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
|
vPC forklift upgrade support |
Support for upgrading from a pair of Nexus 9000 switches in a vPC topology to a different pair of Nexus 9000 series switches. |
6.1(2)I3(4) |
|
|
IP-in-IP tunnel support |
Enables encapsulation and decapsulation of packets to create a tunnel. |
6.1(2)I3(4) |
Point-to-Point IP-in-IP Tunnel Encapsulation and Decapsulation |
|
Subinterface support on port-channel interfaces |
Support for one or more subinterfaces on a port-channel interface. |
6.1(2)I3(3) |
|
|
GRE support for IP tunnels |
Support for the GRE carrier protocol to enable IP tunnels to enable IPV4 transport between two devices. |
6.1(2)I3(2) |
|
|
Cisco Nexus 9300 subinterface support |
Added support of Cisco Nexus 9300 subinterface support. (Removed restriction of no subinterface support for Cisco Nexus 9300 platforms.) |
6.1(2)I3(1) |
|
|
FEX support |
Added Cisco Nexus 2000 Fabric Extender(FEX) support. |
6.1(2)I2(3) |
|
|
Cisco QSFP+ to SFP+ Adapter (QSA) module |
Added the Cisco QSFP+ to SFP+ Adapter (QSA) module feature to provide 40G to 10G conversion support. |
6.1(2)I2(2) |
Feedback