Cisco Nexus 93240YC-FX2 NX-OS Mode Switch Hardware Installation Guide

Rack Mount Kit NXK-ACC-KIT-1RU

The following table lists and illustrates the contents for the 1-RU rack-mount kit (NXK-ACC-KIT-1RU).


Illustration	Description	Quantity
	Rack-mount kit Front brackets (2) Rear brackets (2) Slider rails (2) M4 Phillips pan-head screws (10)	1
	Ground lug kit Two-hole lug (1) M4 x 8-mm Phillips pan-head screws (2)	1
Not applicable	EAC Compliance document	1
Not applicable	Hazardous substances list for customers in China	1

The following table lists and illustrates the console cable (CAB-CONSOLE-RJ45) that can be ordered.


Illustration	Description	Quantity
	Console cable with DB-9F and RJ-45F connectors	1

The following table lists and illustrates the contents for the 1-RU rack-mount kit (N3K-C3064-ACC-KIT).


Illustration	Description	Quantity
	Rack-mount kit Front-mount angled bracket (2) Rear-mount slider bracket (2) Slider rails (2) M4 x 7 mm mounting screws (16)	1
	Ground lug kit Two-hole lug (1) M4 x 8-mm Phillips pan-head screws (2)	1
Not applicable	EAC Compliance document	1
Not applicable	Hazardous substances list for customers in China	1

The following table lists and illustrates the console cable (CAB-CONSOLE-RJ45) that can be ordered.


Illustration	Description	Quantity
	Console cable with DB-9F and RJ-45F connectors	1

The following table lists and illustrates the airflow sleeve (NXA-AIRFLOW-SLV3).


Illustration	Description	Quantity
	Airflow sleeve	1

The following table lists and illustrates the vent bracket (NXA-ACC-BAV2).

Note

You require the vent bracket (NXA-ACC-BAV2) for NEBS (Network Equipment-Building System) compliance only.


Illustration	Description	Quantity
	Vent bracket	1