Recovering a Disconnected Leaf Using the NX-OS-Style CLI
This this procedure enables fabric interfaces using the Cisco Application Policy Infrastructure Controller (APIC) NX-OS-style CLI. Use this procedure if you do not have any external tools from which you can make REST API calls.
Note |
This procedure assumes that 1/31 is one of the leaf switch ports connecting to the spine switch. |
Procedure
Step 1 |
Using Cisco APIC NX-OS-style CLI, remove the block list policy. Example:
|
Step 2 |
Using the CLI of a leaf or spine switch, set the port in service to bring up the port on the leaf switch. Example:
|