Overview
This guide explains how to deploy and manage the Secure Firewall Threat Defense on the Firepower 1010 using a centralized Firewall Management Center at central headquartres. It covers hardware setup, device registration through manual or zero-touch provisioning, and the configuration of foundational security policies. Use these procedures to establish network connectivity and apply core firewall protections.
Before You Begin
Check your software version and reimage if necessary, obtain your licenses, and make sure you can connect.
Cable and Register the Firewall
Connect your Firepower 1010 to the network and register it to the manager.
Configure a Basic Policy
Configure a basic security policy to get your Firepower 1010 up and running.