Firepower 1010 Threat Defense Getting Started: Management Center on a Local Management Network

PDF

(If Needed) Power off the firewall

Updated: March 19, 2026

Want to summarize with AI?

Log in

Overview

How to safely power off the Firepower 1010 to avoid file system damage, using either the FXOS CLI shutdown command or the Firewall Management Center shutdown workflow.

It's important that you shut down your system properly. Simply unplugging the power can cause serious file system damage. There are many processes running in the background all the time, and unplugging or shutting off the power does not allow the graceful shutdown of your firewall system.

The Firepower 1010 chassis does not have an external power switch..

Power off the firewall at the CLI

You can use the FXOS CLI to safely shut down the system and power off the firewall.

Procedure

1.

Connect to the console port using either port type.

Figure 1. Console port
Console port
2.

In the FXOS CLI, connect to local-mgmt mode.

firepower # connect local-mgmt

3.

Shut down the system.

firepower(local-mgmt) # shutdown

Example:

firepower(local-mgmt)# shutdown 
This command will shutdown the system.  Continue?
Please enter 'YES' or 'NO': yes
INIT: Stopping Cisco Threat Defense......ok
4.

Monitor the system prompts as the firewall shuts down. When the shutdown is complete, you will see the following prompt.


System is stopped.
It is safe to power off now.
Do you want to reboot instead? [y/N]
5.

You can now unplug the power to physically remove power from the chassis if necessary.

Power off the firewall using the Firewall Management Center

Shut down your system properly using the Firewall Management Center.

Procedure

1.

Shut down the firewall.

  1. Choose Devices > Device Management.

  2. Next to the device that you want to restart, click Edit (edit icon).

  3. Click the Device tab.

  4. Click Shut Down Device (shut down device icon) in the System section.

  5. When prompted, confirm that you want to shut down the device.

2.

If you have a console connection to the firewall, monitor the system prompts as the firewall shuts down. When shutdown is complete, you will see the following prompt.


System is stopped.
It is safe to power off now.

Do you want to reboot instead? [y/N]

If you do not have a console connection, wait approximately 3 minutes to ensure the system has shut down.
3.

You can now unplug the power to physically remove power from the chassis if necessary.