Cisco Cyber Vision Syslog Notification Format Configuration Guide, Release 5.3.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 9, 2025

About this documentation

Document purpose

This document specifies the syslog format used by Cisco Cyber Vision when exporting events or alerts to an external server and describes how to configure it.

This manual applies to system versions 5.3.x.

Warnings and notices

To ensure your personal safety and to prevent damage to property, observe the following: Warnings and notices and Safety Alert symbols. These notices are graded according to the degree of danger.

Warning

Indicates risks that involve industrial network safety or production failure that could possibly result in personal injury or severe property damage. Take precautions.

Important

Indicates risks that could involve property or Cisco equipment damage and minor personal injury. Take precautions.

Note

Indicates important information on the product described in the documentation.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)