- Overview
- Software packaging and architecture
- Deploy IOS-XE and SDWAN
- Using Cisco IOS XE software
- Tamper Detection
- Bay Configuration
- Consolidated Package Management
- Software upgrade processes
- Factory Reset
- Support for Security-Enhanced Linux
- High Availability Overview
- Using the management ethernet interface
- Configuring bridge domain interfaces
- Packet Trace
- Packet Drops
- EVPN VPWS over SR-TE Preferred Path
- Configuring SFP
- Cisco thousand eyes enterprise agent application hosting
Software upgrade processes
-
Copy the XE image to the router and configure the boot system to point to the new image.
-
Copy the ROMMON package to the router and perform the ROMMON upgrade.
-
Reload the router and verify that it boots to the IOS prompt on the new XE image.
-
Verify that the new ROMMON image was successfully installed using a show platform.
Feedback