The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The table lists the feature history for managing account settings.
|
Feature Name |
Release Information |
Description |
|---|---|---|
| Support for managing predefined inbound rules |
2022-11 Release |
This feature enables you to specify trusted IP addresses and prefixes to manage control component access. You can also apply predefined inbound rules to all fabrics. |
You can specify predefined inbound rules for allowing trusted IP addresses, including prefixes, to manage control component access. The predefined rules apply to any existing or new fabric created with the associated Smart Account.
You can add up to two hundred rules per fabric.
With predefined inbound rules, you can:
automatically apply rules to any overlay that you create with the associated Smart Account, and
support audit log entries for allowed IP addresses.
Create a Smart Account.
For more information on creating a Smart Account, see Workflow for Smart Account and Virtual Accounts for Provisioning the Controllers.
Create a fabric.
For more information on creating a Cisco SD-WAN Cloud-Pro fabric, see Create a Cisco SD-WAN Cloud-Pro Overlay Network.
From the Cisco Catalyst SD-WAN Portal menu, choose Admin Settings.
Under Actions, click . . . and choose Manage Predefined Inbound Rules from the drop-down list.
Click Add Predefined Inbound Rules to add a predefined inbound rule.
Configure the following fields:
|
Field |
Description |
|---|---|
|
Name |
Enter a name for the predefined inbound rule. |
|
Rule Type |
Choose one of the available options from the drop-down list.
|
|
Protocol |
Protocol is automatically populated depending on which Rule Type you choose. |
|
Port Range |
Enter a port range. If you chose Custom TCP rule or Custom UDP rule, the port range was automatically populated. |
|
Source |
Enter an IP address or an IP address prefix. |
|
Description |
Enter a description for the predefined inbound rule. |
|
Automatically add this rule to ALL fabrics |
Select this option to apply the predefined rules to all the fabrics associated with your Smart Account. If you do not select this option, the rule is not added to your existing fabrics. |
Click Add.
Feedback