Describes how to verify the status of SMU images using CLI commands. Provides sample outputs and explains how to interpret activation, deactivation, and removal states for SMU images to assist with upgrade and rollback operations.
Use CLI commands to check the installation, activation, deactivation, and removal status of SMU images. Review command outputs to determine the current state and rollback timer for SMU images on the device.
SMU image status verification and output interpretation
The show install summary command displays the installed packages and their states, including SMU images. The state codes indicate whether an image is inactive, activated and uncommitted, activated and committed, or deactivated and uncommitted. The Auto abort timer value shows the time left before rollback.
State (St): I - Inactive, U - Activated & Uncommitted, C - Activated & Committed, D - Deactivated & Uncommitted
Device# show install summary
[ R0 ] Installed Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
IMG C 17.09.01a.0.247
SMU I bootflash:c8000v-universalk9.2022-08-17_23.44_mcpre.24042.CSCvq24042.SSA.smu.bin
--------------------------------------------------------------------------------
Auto abort timer: inactive
--------------------------------------------------------------------------------SMU image deactivation and removal
The request platform software sdwan smu deactivate command deactivates an SMU image. The output confirms the deactivation process and result. After deactivation, the show install summary command reflects the new state and the auto abort timer status.
Device# request platform software sdwan smu deactivate 17.09.01a.0.247.CSCvq24042
smu_deactivate: START Mon Mar 5 21:54:06 PST 2021
smu_deactivate: Deactivating SMU
Executing pre scripts....
Executing pre scripts done.
--- Starting SMU Deactivate operation ---
Performing SMU_DEACTIVATE on all members
[1] SMU_DEACTIVATE package(s) on switch 1
[1] Finished SMU_DEACTIVATE on switch 1
Checking status of SMU_DEACTIVATE on [1]
SMU_DEACTIVATE: Passed on [1]
Finished SMU Deactivate operation
SUCCESS: smu_deactivate 17.09.01a.0.247.CSCvq24042Device# show install summary
[ R0 ] Installed Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
IMG C 17.09.01a.0.247
SMU D bootflash: c8000v-universalk9.2022-08-17_23.44_mcpre.24042.CSCvq24042.SSA.smu.bin
--------------------------------------------------------------------------------
Auto abort timer: active , time before rollback - 00:04:57
--------------------------------------------------------------------------------Device# request platform software sdwan smu deactivate 17.09.01a.0.247.CSCvq24042
install_deactivate: START Thu Aug 25 17:47:10 UTC 2022
install_deactivate: Deactivating SMU
Executing pre scripts....
Executing pre sripts done.
--- Starting SMU Deactivate operation ---
Performing SMU_DEACTIVATE on Active/Standby
[1] SMU_DEACTIVATE package(s) on R0
[1] Finished SMU_DEACTIVATE on R0
Checking status of SMU_DEACTIVATE on [R0]
SMU_DEACTIVATE: Passed on [R0]
Finished SMU Deactivate operation
CSCvq24042:SUCCESS
SUCCESS: install_deactivate /bootflash/c8kv_hot.bin Thu Aug 25 17:47:33 UTC 2022Device# show install summary
[ R0 ] Installed Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
IMG C 17.09.01a.0.247
--------------------------------------------------------------------------------
Auto abort timer: inactive
--------------------------------------------------------------------------------SMU image metadata inspection
The show install package command provides metadata for an SMU image, including name, version, platform, package type, defect ID, package state, SMU ID, SMU type, compatibility, and impact.
Device# show install package bootflash:c8000v-universalk9.2022-08-17_23.44_mcpre.24042.CSCvq24042.SSA.smu.bin
Name: c8000v-universalk9.2022-08-17_23.44_mcpre.24042.CSCvq24042.SSA.smu.bin
Version: 17.09.01a.0.247.1660805065
Platform: C8000V
Package Type: SMU
Defect ID: CSCvq24042
Package State: Inactive
Supersedes List: {}
SMU Fixes List: {}
SMU ID: 24042
SMU Type: non-reload
SMU Compatible with Version: 17.09.01a.0.247
SMUImpact: