- What's New in Cisco NFVIS
- Overview of Cisco NFVIS SD-Branch Solution
- Define Cisco NFVIS SD-Branch Solution
- Design Cisco NFVIS SD-Branch Solution
- Deploy Cisco NFVIS SD-Branch Solution
- Operate Cisco NFVIS SD-Branch Solution
- Support for Making Day N Changes to Profiles Attached to a Device
- Upgrade Cisco NFVIS Software
- Manage Cisco Catalyst 8300 Series Edge uCPE using Cisco SD-WAN Manager via NFV Config Group Workflow
- Appendix
Design and Deployment of Cisco NFVIS SD-Branch using Cisco Catalyst SD-WAN Manager
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- January 22, 2024
Chapter: What's New in Cisco NFVIS
What's New in Cisco NFVIS
 Note |
To achieve simplification and consistency, the Cisco SD-WAN solution has been rebranded as Cisco Catalyst SD-WAN. In addition, from Cisco IOS XE SD-WAN Release 17.12.1a and Cisco Catalyst SD-WAN Release 20.12.1, the following component changes are applicable: Cisco vManage to Cisco Catalyst SD-WAN Manager, Cisco vAnalytics to Cisco Catalyst SD-WAN Analytics, Cisco vBond to Cisco Catalyst SD-WAN Validator, Cisco vSmart to Cisco Catalyst SD-WAN Controller, and Cisco Controllers to Cisco Catalyst SD-WAN Control Components. See the latest Release Notes for a comprehensive list of all the component brand name changes. While we transition to the new names, some inconsistencies might be present in the documentation set because of a phased approach to the user interface updates of the software product. |
|
Feature |
Release Information |
Description |
||
|---|---|---|---|---|
|
Manage Cisco NFVIS Devices Using Cisco SD-WAN Manager Via NFV Configuration Group. |
Cisco NFVIS Release 4.12.1 Cisco SD-WAN Manager Release 20.12.1 |
You can manage the lifecycle of Cisco NFVIS devices using Cisco SD-WAN Manager.
|
|
Feature |
Release Information |
Description |
|---|---|---|
|
NFVIS 4.9 Release Cisco vManage Release 20.9.1 |
This feature enables you to schedule a software upgrade workflow to upgrade your Cisco NFVIS devices. |
|
Feature |
Release Information |
Description |
|---|---|---|
|
NFVIS 4.8 Release Cisco vManage Release 20.8.1 |
This feature enables you to do a skip-version and multi-step upgrade of Cisco NFVIS using the .iso file. |
|
Feature |
Release Information |
Description |
|---|---|---|
|
Support for Making Day N Changes to Profiles Attached to a Device |
NFVIS 4.6 Release Cisco vManage Release 20.6.1 |
This feature allows you to make changes to Network Design profiles even after they are attached to a device. |
|
NFVIS 4.6 Cisco vManage Release 20.6.1 |
This feature allows you to register a VNF image by uploading seperate VNF packages for image package, scaffold, and disk image. |
|
Feature |
Release Information |
Description |
|---|---|---|
|
NFVIS 4.5 Release Cisco vManage Release 20.5.1 |
This release extends the support for using a single public IP address between NFVIS and the router VM to the SD-Branch solution. |
|
|
NFVIS 4.5 Release Cisco vManage Release 20.5.1 |
This release extends the support for start, stop, and restart of the deployed VMs. |
Feedback