Full Cisco Trademarks with Software License
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
All printed copies and duplicate soft copies of this document are considered uncontrolled. See the current online version for the latest version.
Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
About The Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms
The Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms are best-of-breed, 5G-ready, cloud edge platforms designed for accelerated services, multi-layer security, cloud-native agility, and edge intelligence to accelerate your journey to cloud.
Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms with Cisco IOS XE SD-WAN Software deliver Cisco’s secure, cloud-scale SD-WAN solution for the branch. The Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms are built for high performance and integrated SD-WAN Services along with flexibility to deliver security and networking services together from the cloud or on premises. It provides higher WAN port density and a redundant power supply capability. The Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms have a wide variety of interface options to choose from—ranging from lower and higher module density with backward compatibility to a variety of existing WAN, LAN, voice, and compute modules. Powered by Cisco IOS XE, fully programmable software architecture, and API support, these platforms can facilitate automation at scale to achieve zero-touch IT capability while migrating workloads to the cloud. The Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms also come with Trustworthy Solutions 2.0 infrastructure that secures the platforms against threats and vulnerabilities with integrity verification and remediation of threats.
The Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms are well suited for medium-sized and large enterprise branch offices for high WAN IPSec performance with integrated SD-WAN services.
For more information on the features and specifications of Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms, refer to the Cisco Catalyst 8300 Series Edge platforms datasheet.
 Note |
Sections in this documentation apply to all models of Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms unless a reference to a specific model is made explicitly. |
Note |
Starting with Cisco IOS XE Amsterdam 17.3.2, with the introduction of Smart Licensing Using Policy, even if you configure a hostname for a product instance or device, only the Unique Device Identifier (UDI) is displayed. This change in the display can be observed in all licensing utilities and user interfaces where the hostname was displayed in earlier releases. It does not affect any licensing functionality. There is no workaround for this limitation. The licensing utilities and user interfaces that are affected by this limitation include only the following:
|
Note |
Cisco IOS XE Dublin 17.10.1a is the first release for the Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms in the Cisco IOS XE Dublin 17.10.x release series. |
Product Field Notice
Cisco publishes Field Notices to notify customers and partners about significant issues in Cisco products that typically require an upgrade, workaround or other user action. For more information, see https://www.cisco.com/c/en/us/support/web/field-notice-overview.html.
We recommend that you review the field notices to determine whether your software or hardware platforms are affected. You can access the field notices from https://www.cisco.com/c/en/us/support/web/tsd-products-field-notice-summary.html#%7Etab-product-categories.
New and Changed Hardware and Software Features
New and Changed Hardware Features
There are no new hardware features in this release.
New and Changed Software Features
Feature Navigator
You can use Cisco Feature Navigator (CFN) to find information about the software features, platform, and software image support on Cisco Catalyst 8200 and Catalyst 8300 Series Edge Platforms. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
Note |
To access CFN, you do not require an account on cisco.com. |
New Software Features
|
Feature |
Discription |
||
|---|---|---|---|
|
Using this feature you can configure to match the packets based on user defined field position and length. This can be used by an ACL to match packets that cannot be classified easily with the traditional Layer 3 and Layer 4 field information. |
|||
|
Segment Routing Absolute One-Way Link Loss Measurement for GRE-IPSec Tunnel |
This feature provides a mechanism for link loss measurement for point-to-point GRE-IPSec tunnel and identifies paths that meet specified loss criteria.
|
||
|
Support for Secure Real-time Transport Protocol (SRTP) Dual-Tone Multi-Frequency (DTMF) Interworking |
This feature provides support for Dual-Tone Multi-Frequency (DTMF) interworking between Cisco Unified Communications Manager (CUCM) and Secure Software MTP in pass-through mode. It is supported on both CUCM and Cisco IOS XE software. |
||
|
Support for YANG Operational Model in the GETVPN architecture |
This feature enables the YANG operational model in the GETVPN architecture to support the crypto gdoi command which was previously enabled only for the CLI and SNMP models. |
ROMMON Compatibility Matrix
The following table lists the ROMMON releases supported in Cisco IOS XE 17.10.x releases.
|
Platforms |
Cisco IOS XE Release |
Minimum ROMMON Release Supported for IOS XE |
Recommended ROMMON Release Supported for IOS XE |
|---|---|---|---|
|
Catalyst 8300 Series Edge Platforms |
|||
|
C8300-1N1S-4T2X|6T |
17.10.1a |
17.3(1r) |
17.3(5r) |
|
C8300-2N2S-4T2X|6T |
17.10.1a |
17.3(1.2r) |
17.3(4.1r) |
|
Catalyst 8200 Series Edge Platforms |
|||
|
C8200-1N-4T |
17.10.1a |
17.4(1r) |
17.4(3r) |
|
C8200L-1N-4T |
17.10.1a |
17.5(1.1r) |
17.5(2r) |
Cisco Bug Search Tool
Cisco Bug Search Tool (BST) is a gateway to the Cisco bug-tracking system, which maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. The BST provides you with detailed defect information about your products and software.
Resolved Bugs in Cisco IOS XE 17.10.1a
|
Identifier |
Headline |
|---|---|
|
Device reloads unexpectedly during NHRP processing. |
|
|
X25 FRMR seen when switching from XOT to low speed serial. |
|
|
Device running 17.3(4a) crashed - track the fman-fp's memory leak caused by cond-debug. |
|
|
Improve debug for reload at crypto_dev_proxy_ipc_ipsec_sa_crt_hndlr when scale exceed limit. |
|
|
PFP policy in SRTE, RIB resolution in FC bring down ipsec tunnel interface- stuck at linestate down. |
|
|
Standby device crash @ fman_acl_remove_default_ace. |
|
|
GetVPN Long Security Association - GM re-registration after encrypting 2^32-1 of packets in one IPsec security association. |
Open Bugs in Cisco IOS XE 17.10.1a
|
Identifier |
Headline |
|---|---|
|
Interface Vlan1 is placed in shutdown state when configured with ip address pool command. |
|
|
IOS-XE: A high CPU utilization caused by NHRP. |
|
|
MSR Unicast-To-Multicast is not working if the destination and source address are the same in Service Reflect configuration. |
|
|
IPSEC throughput level displays ambiguous outputs. |
|
|
Data Plane crash is seen on the device when making the QOS configuration changes. |
|
|
Ucode crash is seen on the device with traffic pointing to segfault in coff handler. |
|
|
Device crashing and restarting during call flow with new image. |
|
|
IKEv2: The RRI routes are intermittently disappearing from a FlexVPN hub. |
|
|
Displays the increase of Input errors without any other specifc errors when the show interface is executed. |
|
|
Fman crash is seen in SGACL@ fman_sgacl_calloc. |
|
|
Unexpected reboot due to IOSXE-WATCHDOG: Process = Crypto IKMP. |
|
|
Device reload unexpectedly when enabling IDS. |
|
|
Segmentation fault crash in CCSIP_SPI_CONTROL process. |
|
|
CUBE call leak at FPI layer. |
|
|
Unexpected reload due to segmentation fault in the CCSIP_SPI_CONTROL process. |
|
|
When using SRTP with higher ciphers, CUBE is inserting distortion in voice. |
Related Documentation
Communications, Services, and Additional Information
-
To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.
-
To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.
-
To submit a service request, visit Cisco Support.
-
To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.
-
To obtain general networking, training, and certification titles, visit Cisco Press.
-
To find warranty information for a specific product or product family, access Cisco Warranty Finder.
Cisco Bug Search Tool
Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.
Documentation Feedback
To provide feedback about Cisco technical documentation, use the feedback form available in the right pane of every online document.
Troubleshooting
For the most up-to-date, detailed troubleshooting information, see the Cisco TAC website at https://www.cisco.com/en/US/support/index.html.
Go to Products by Category and choose your product from the list, or enter the name of your product. Look under Troubleshoot and Alerts to find information for the issue that you are experiencing.
Feedback