- Using Ethernet Operations Administration and Maintenance
- Trunk EFP Support
- Ethernet Virtual Connections Configuration
- EVC Local Connect
- Using Ethernet Fault Detection
- Configuring Ethernet Connectivity Fault Management in a Service Provider Network
- Transparent CFM
- VLAN Translation with QoS
- G.8032 and CFM Support for Microwave Adaptive Bandwidth
- Configuring Ethernet Local Management Interface at a Provider Edge
- ITU-T Y.1731 Performance Monitoring in a Service Provider Network
- Using Link Layer Discovery Protocol in Multivendor Networks
- Configuring Switched Port Analyzer
- Configuring IEEE 802.1ad
Carrier Ethernet Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 920 Series)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- June 7, 2018
Feedback