L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 7.10.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: August 18, 2023

New and Changed VPN Features

This table summarizes the new and changed feature information for the L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, and tells you where they are documented.

New and Changed VPN Features

Table 1. VPN Features Added or Modified in IOS XR Release 7.10.x
Feature	Description	Changed in Release	Where Documented
EVPN Port-Active Hot Standby on Bundle Interfaces	This feature was introduced.	Release 7.10.1	EVPN Port-Active Hot Standby on Bundle Interfaces
Set EVPN Gateway IP Address in EVPN Route Type 5 NLRI	This feature was introduced.	Release 7.10.1	Set EVPN Gateway IP Address in EVPN Route Type 5 NLRI
Increased Ethernet Flow Point Support per Bundle Interface	This feature was modified.	Release 7.10.1	Improving the Scalability of EFPs on Bundle Interfaces

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)