New and Changed Information
The following sections list the new hardware and software features that are supported by the Cisco ASR 1000 Series Routers for Cisco IOS XE Release 3.15S:
New Hardware in Cisco ASR 1000 Series Aggregation Services Routers Release 3.15S
No new hardware features were introduced in Cisco ASR 1000 Series Aggregation Services Routers Release 3.15.0S.
New Software Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.15.0S
The following are the new software features introduced in Cisco ASR 1000 Series Aggregation Services Routers Release 3.15.0S.
C3PL - BGP flowspec client
The Border Gateway Protocol (BGP) flow specification client feature enables a device to perform the role of a BGP flow specification client and receive flow specification rules from a BGP flow specification controller.
Cisco Service Discovery Gateway - Phase 3
For detailed information, see the following Cisco document:
CLI control to extend port range to entire range
For detailed information, see the following Cisco document:
Zone-Based Firewall: Serviceability Enhancements Phase 4
The Zone-Based Firewall Serviceability Enhancements Phase 4 feature provides the following functionalities:
- Enhances the zone-based firewall client debugs
- Enhances the firewall client statistics related to zone, zone pair, VRF, per-filter and PAM
- Provides policy transaction debugs.
- The following command was introduced: debug platform condition feature fw controlplane submode. For more information on this command, see Cisco IOS Debug Command Reference - Commands M through R.
- The following commands were removed: set platform software trace forwarding-manager FP active fw, set platform software trace forwarding-manager RP active fw, set platform software trace forwarding-manager F0 fw, s et platform software trace forwarding-manager R0 fw. For more information on these commands, see Cisco IOS Security Command Reference: Commands M to R.