WIC-1AM and WIC-2AM Documentation Roadmap

Available Languages

Download Options

PDF (180.7 KB)
View with Adobe Reader on a variety of devices

Updated:June 4, 2007

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

WIC-1AM and WIC-2AM Documentation Roadmap

Table Of Contents

WIC-1AM and WIC-2AM Documentation Roadmap

Product Information and Supported Hardware and Software

Regulatory Compliance and Safety Information

Hardware Installation

Interface and Line Numbering

Software Configuration

Modem Firmware and Modemcaps

WIC-1AM and WIC-2AM Documentation Roadmap

Updated 9/21/2004

This document provides links to resources for understanding, installing, and configuring analog modem WAN interface cards (WICs). Use this document in HTML format on Cisco.com.

Products:

WIC-1AM

1-port analog modem WAN interface card

WIC-2AM

2-port analog modem WAN interface card

Note This is a platform-independent document. To see which routers support these products, refer to the documents in the following section.

Product Information and Supported Hardware and Software

•Cisco 1700, 2600, 3600, and 3700 Integrated V.90 Modem WAN Interface Cards, data sheet

•Understanding Analog Modem WAN Interface Cards (WIC-1AM or WIC-2AM), tech note

•WAN Interface Card (WIC)/Platform Hardware Compatibility Matrix for 1600, 1700, 2600, 3600, and 3700 Series Routers, tech note

Regulatory Compliance and Safety Information

•Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information

Hardware Installation

See the following chapters of the Cisco Interface Cards Hardware Installation Guide:

•Installing Cisco Interface Cards in Cisco Access Routers

•Connecting Analog Modem WAN Interface Cards to a Network

Interface and Line Numbering

•Overview in the hardware installation documentation for your router

Software Configuration

•Analog Modem Interface Card Configuration Notes for Cisco 1700 Series Routers

•1- and 2-Port V.90 Modem WICs for Cisco 2600 and Cisco 3600 Series Multiservice Platforms, Cisco IOS Release 12.2(8)T feature module

•1- and 2-Port V.90 Modem WICs for Cisco 2600 and Cisco 3600 Series Multiservice Platforms, Cisco IOS Release 12.2(2)XB feature module

•Modem - Router Connection Guide, tech note

Modem Firmware and Modemcaps

•Recommended Modemcaps for Internal Digital and Analog Modems on Cisco Access Servers, tech note

•AT Command Set and Register Summary for V.90 WIC-1AM and WIC-2AM Analog Modem WAN Interface Cards

Copyright © 2004 Cisco Systems, Inc. All rights reserved.