Introduction to this Document

This Release Notes document provides information about the Cisco Catalyst IR1101 Rugged Series Routers, Cisco Catalyst IR1800 Rugged Series Routers, Cisco Catalyst IR8140 Heavy Duty Series Routers, Cisco Catalyst IR8340 Rugged Series Routers, and Cisco ESR6300 Embedded Series Routers running Cisco IOS XE 17.9.3.

This document describes the new features, limitations, troubleshooting, besides providing recommended configurations, caveats, and information on how to obtain support and documentation.


Note


The documentation set for this product strives to use bias-free language. For purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product.

Cisco Catalyst IR1101 Rugged Series Router

The Cisco Catalyst IR1101 Rugged Series Router is a next-generation modular industrial router, which has a base platform with additional pluggable modules that can be added. The pluggable modules provide the flexibility of adding different interfaces to the IR1101 platform, for example, a cellular module, which provides 5G and Fourth-Generation Long-Term Evolution (4G LTE) cellular networks.

The IR1101 also has expansion modules that adds key capabilities to the IR1101. The expansion modules are:

SKU ID

Description

IRM-1100-SPMI

Expansion Module with 1 GE SFP, 1 Pluggable Module, 4 GPIO ports on 1 Digital I/O Connector, and 1 mSATA SSD Slot.

IRM-1100-SP

Expansion Module with 1 GE SFP and1 Pluggable Module.

IRM-1100-4A2T

Expansion Module with an additional four asynchronous serial ports and two Ethernet RJ45 LAN interfaces.

Cellular pluggable modules

A number of pluggable modules are available for cellular connectivity.

IRM-SSD-100G

100 GB pluggable industrial SSD.

Cisco Catalyst IR1800 Rugged Series Router

The Cisco Catalyst IR1800 Rugged Series Router is a modular industrial router. The IR1800 series has four base platforms with additional pluggable modules that can be added. The pluggable modules provide the flexibility of adding different interfaces to the base platform.

The IR1800 series consists of four base platforms:

  • IR1821

  • IR1831

  • IR1833

  • IR1835

The IR1800 series features a base platform with modularity, that includes:

SKU ID

Description

IRM-GNSS-ADR

GPS Module with automotive dead reckoning.

WP-WIFI6-x

Wi-Fi 6 Network Interface Module (NIM).

Cellular pluggable modules

A number of pluggable modules are available for cellular connectivity.

IRM-SSD-100G

100 GB pluggable industrial SSD.

Table 1. Differences Between the IR1800 Series Routers' Features

Feature

IR1821

IR1831

IR1833

IR1835

Processor Frequency

600 MHz

600 MHz

600 MHz

1200 MHz

DDR Memory

4 GB

4 GB

4 GB

8 GB

Flash Storage

4 GB

4 GB

4 GB

8 GB

PIM Slot

1

2

2

2

Wi-Fi NIM Module Slot

1

1

1

1

PoE

No

No

Yes

Yes

SSD Module Slot

No

No

Yes

Yes

GPS FRU Module Slot

No

No

Yes

Yes

Digital I/O

No

No

No

Yes

Asynchronous Serial Interface

(1) RS232 DTE

(1) RS232 DTE

(1) RS232 DCE

(1) RS232 DTE

(1) RS232 DCE

(1) RS232 DTE

(1) RS232 DCE/RS485

Cisco Catalyst IR8140 Heavy Duty Series Router

The Cisco Catalyst IR8140 Heavy Duty Series Router (IR8140H), is a next-generation modular IP 67 Industrial Router for outdoor use.

These are the two IR8140H models:

  • IR8140H-P-K9 (with PoE PSE)

  • IR8140H-K9 (without PoE PSE)

The IR8140H series features contains four external module slots plus two onboard WAN ports, and supports the following:

  • 60-W PSU

  • CPU 1.2 GHz

  • 8GB RAM

  • 8GB Flash Storage

  • GPS onboard receiver

  • 900-MHz WPAN – OFDM/FSK Module

  • 4G/LTE and 5G IRMH modules

  • mSATA module

  • 1x 1-Gigabit Ethernet SFP WAN

  • 1x 1-Gigabit Ethernet Cu WAN

  • PoE (15 W) supported only in the IR8140H-P-K9 PID

  • 12VDC_OUT port (only available when PoE is not in use)

  • Battery Backup Units (BBUs): Up to three

  • 2x Alarm ports (Digital I/O)

Cisco Catalyst IR8340 Rugged Series Router

The Cisco Catalyst IR8340 Rugged Series Router, is the first all-in-one industrial-grade, integrated routing, switching, and security platform.

The IR8340 router features two Pluggable Interface Module (PIM) slots, two single-wide IRM-NIM slots, plus 12 onboard LAN ports, and two WAN ports, and supports the following:

  • 150W or 250W PSU, low-voltage DC and high-voltage AC/DC options

  • PTP on LAN ports - Default, power and Dot1as profiles

  • 5G and 4G LTE PIM

  • T1/E1 Network Interface Modules (NIM)

  • 8-port Asynchronous/Synchronous Network Interface Module (NIM) IRM-NIM-RS232

  • mSATA module

  • 2 x 1-G Combo WAN ports

  • 4 x 1-G Copper LAN ports

  • 4 x 1-G Combo LAN ports

  • 4 x 1-G SFP LAN ports

  • PoE PoE+ UPoE (up to 60 W) support on LAN ports 1-4

  • 2 x IN and 1 x OUT Alarm ports (RJ45)

Cisco ESR6300 Embedded Series Router

The ESR6300 is a small form factor embedded router module with a board size of 3.0 in. x 3.775 in. (76.2 mm x 95.885 mm).

The more compact design simplifies integration, and offers system integrators the ability to use the Cisco ESR6300 in a wide variety of embedded applications. The ESR module is available with a Cisco-designed cooling plate customized to the ESR, as well as without the cooling plate for system integrators who want to design their own custom thermal solution.

There are two ESR6300 SKUs:

  • ESR-6300-NCP-K9: Embedded Router Board without a cooling plate

  • ESR-6300-CON-K9: Embedded Router Board with a cooling plate

Both of the SKUs offer the following port and module interfaces:

  • Four GE LAN ports

  • Two combo GE WAN ports

  • One USB 3.0 port

  • One mSATA module interface

Interface Naming Conventions

Cisco Catalyst IR1101 Rugged Series Router

The following section shows the names of the interfaces on each of the IoT routers.

Port

Naming Convention

Gigabit Ethernet combo port

GigabitEthernet0/0/0

Gigabit Ethernet SFP port on IRM-1100

GigabitEthernet0/0/5

Gigabit Ethernet on IRM-1100-4A2T mounted on the Expansion side

gigabitetherenet 0/0/5

gigabitetherenet 0/0/6

Fast Ethernet ports

FastEthernet0/0/1-0/0/4

Cellular Interface on IR1101 Base

Cellular 0/1/0 and Cellular 0/1/1

Cellular Interface on IRM-1100 mounted on the top (EM) side.

Cellular 0/3/0 and Cellular 0/3/1

Cellular Interface on IRM-1100 mounted on the bottom (CM) side.

Cellular 0/4/0 and Cellular 0/4/1

Asynchronous Serial Interface Base

Async0/2/0

IRM-1100-4A2T is mounted on the top (EM) side

async 0/3/0

async 0/3/1

async 0/3/2

async 0/3/3

IRM-1100-4A2T is mounted on the bottom (CM) side

async 0/4/0

async 0/4/1

async 0/4/2

async 0/4/3

USB

usbflash0:

mSATA

msata

IR1101 Base Unit Alarm input

alarm contact 0

GPIO on IRM-1100

alarm contact 1-4

Cisco Catalyst IR1800 Rugged Series Router

Port

Naming Convention

Gigabit Ethernet combo port

GigabitEthernet0/0/0

Gigabit Ethernet ports

GigabitEthernet0/1/0

GigabitEthernet0/1/1

GigabitEthernet0/1/2

GigabitEthernet0/1/3

Cellular Interface

Cellular 0/4/0

Cellular 0/4/1

Cellular 0/5/0

Cellular 0/5/1

Asynchronous Serial Interface

Async0/2/0

Async0/2/1 (when the base platform supports two asynchronous serial interfaces)

Wi-Fi Interface

Wl0/1/4

USB

usbflash0:

mSATA

msata

GPIO

alarm contact 1-4

Cisco Catalyst IR8140 Heavy Duty Series Router

Port

Naming Convention

Gigabit Ethernet ports

GigabitEthernet0/0/0

GigabitEthernet0/0/1

Cellular Interface

Cellular 0/2/0

OR

Cellular 0/3/0

SSD

Virtual port Group0

WPAN

Wpan 0/1/0

Wpan 0/2/0

Wpan 0/3/0

Digital IO

alarm contact 1-2

Cisco Catalyst IR8340 Rugged Series Router

Port

Naming Convention

Gigabit Ethernet WAN ports

GigabitEthernet0/0/0

GigabitEthernet0/0/1

Gigabit Ethernet LAN ports

GigabitEthernet0/1/0

GigabitEthernet0/1/1

GigabitEthernet0/1/2

GigabitEthernet0/1/3

GigabitEthernet0/1/4

GigabitEthernet0/1/5

GigabitEthernet0/1/6

GigabitEthernet0/1/7

GigabitEthernet0/1/8

GigabitEthernet0/1/9

GigabitEthernet0/1/10

GigabitEthernet0/1/11

Cellular Interface

Cellular 0/4/0

Cellular 0/4/1

Cellular 0/5/0

Cellular 0/5/1

NIM Interface

(Asynchronous/Synchronous Serial Ports or E1/T1 ports)

0/2/0

0/2/1

0/3/0

0/3/1

mSATA SSD

msata

GPIO

alarm contact 1-2

USB Port

usb0:

Console Port

Line console 0

Cisco ESR6300 Embedded Series Router

Port

Naming Convention

Gigabit Ethernet combo port WAN Layer3

GigabitEthernet0/0/0

GigabitEthernet0/0/1

Gigabit Ethernet LAN Layer 2 ports

GigabitEthernet0/1/0

GigabitEthernet0/1/1

GigabitEthernet0/1/2

GigabitEthernet0/1/3

Cellular Interface

Cellular 0/3/0

USB Port

usbflash0: (IOS and rommon)

Console Port

Line console 0

Software Images for Cisco IOS XE Release 17.9.3


Note


You must have a Cisco.com account to download the software.

Cisco IOS XE Release 17.9.3 includes the following Cisco images.

Table 2. Software Images for Cisco IOS-XE, Release 17.9.3

Router

Image Type

Filename

IR1101

Universal

ir1101-universalk9.17.09.03.SPA.bin

NPE

ir1101-universal9_npe.17.09.03.SPA.bin

IR1800

Universal

IR1800-universalk9.17.09.03.SPA.bin

NPE

IR1800-universal9_npe.17.09.03.SPA.bin

IR8140

Universal

IR8100-universalk9.17.09.03.SPA.bin

NPE

IR8100-universal9_npe.17.09.03.SPA.bin

IR8340

Universal

IR8340-universalk9.17.09.03.SPA.bin

NPE

IR8340-universalk9_npe.17.09.03.SPA.bin

ESR6300

Universal

c6300-universalk9.17.09.03.SPA.bin

The latest software downloads for the routers can be found at:

https://software.cisco.com/download/home/286323433

Click the link corresponding to your device to take you to the specific software you are looking for.

New Features in Cisco IOS XE 17.9.3

The following sections describe the major enhancements available in Cisco IOS XE 17.9.3 on each of the routers.


Note


There are no new features for this software release.

Related Documentation

Cisco Catalyst IR1101 Rugged Series Router

IR1101 documentation landing page

Cisco Catalyst IR1800 Rugged Series Router

IR1800 documentation landing page

Cisco Catalyst IR8140 Heavy Duty Series Router

IR8100 documentation landing page

Cisco Catalyst IR8340 Rugged Series Router

IR8340 documentation landing page

Cisco ESR6300 Embedded Series Router

ESR6300 documentation landing page

Product Independent Documentation

Cisco Industrial Routers and Industrial Wireless Access Points Antenna Guide

Cisco IOS XE 17.x

Cisco SD-WAN

Cisco IoT Field Network Director

Cisco Industrial Network Director

Known Limitations

Smart Licensing Using Policy

Starting with Cisco IOS XE 17.6.1, with the introduction of Smart Licensing Using Policy, even if you configure a hostname for a product instance or device, only the Unique Device Identifier (UDI) is displayed. This change in the display can be observed in all licensing utilities and user interfaces where the hostname was displayed in earlier releases. It does not affect any licensing functionality. There is no workaround for this limitation.

The licensing utilities and user interfaces that are affected by this limitation include only the following: Cisco Smart Software Manager (CSSM), Cisco Smart License Utility (CSLU), and Smart Software Manager On-Prem (SSM On-Prem).

IOx on the ESR6300


Note


IOx development is not supported on the ESR6300. While this is platform independent code, it is unsupported and untested on this device.

Config register change issue with service password recovery update

When service password recovery is disabled, then the config register cannot be changed and will be stuck at 0x01. This issue was found on the IR1101 Router. For additional information see the tech note Understand Configuration Register Usage on all Routers.

Expansion Module on the IR1101

The expansion module IR1101 does not support +1500 MT size on LAN interfaces. See this Caveat for details.

Standalone MAC Authentication Bypass (MAB) Limitation

Standalone MAC Authentication Bypass (MAB) is an authentication method that grants network access to specific MAC addresses regardless of 802.1X capability or credentials.

Refer to the following table for details:

Details

Release Affected

Release Fixed

MAB/Dot1x may not work if the global type-6 encryption setting is enabled.

If users still want to use MAB/Dot1x, they should disable the type-6 encryption and enable type-7 encryption.

17.4.X

17.5.X

17.6.1

17.6.2

17.7.1

17.3.5

Fixed in these future releases:

17.6.3

17.7.2

17.8.1 and later.

dACL and device-tracking features are not supported on the IR1101 and ESR6300 due to a hardware limitation. dACL is supported on the IR1800 series.

Therefore, features such as MAB and Dot1x should not be used with the optional dACL/device-tracking enabled.

Note

 
Occurs in all releases.

Hardware limitation, no software fix available.

Caveats

Caveats describe unexpected behavior in Cisco IOS XE releases. Caveats listed as open in a prior release are carried forward to the next release as either open or resolved.

The Cisco Bug Search Tool (BST) is a gateway to the Cisco bug-tracking system, which maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. The BST provides you with detailed defect information about your products and software.

Open Caveats in Cisco IOS XE 17.9.3

To view the details of a caveat, click on the identifier.

Identifier

Description

Platform

CSCwe12989

Shutdown of one subinterface breaking remaining subinterfaces.

ESR6300, IR1101

CSCwc76265

IR1101 crashes when scada_gw is in use, at Process = scada monitoring.

IR1101

CSCwd86680

Async interface used for SCADA went down after upgrading IOS from 17.8.1 to 17.9.1.

IR1101

CSCwf22381

WAN SFP link goes down after reloading Peer.

IR1800

Resolved Caveats in Cisco IOS XE 17.9.3

To view the details of a caveat, click on the identifier.

Identifier

Description

Platform

CSCwd28373

ESR-6300 can´t ping from SVI to another ESR-6300 SVI.

ESR6300

CSCvx89305

When Cellular drops during PnP it never comes back.

IR1101

CSCwa54792

Configure replace fails to handle eem applet removal.

IR1101, ESR6300

CSCwc53623

[SHELL]: IR1101 Raw Socket TCP idle timeout required in seconds and NOT in minutes.

IR1101

CSCwd45924

IR1101 - Cellular Modem "shutdown" Issues - WP7607.

IR1101, ESR6300

CSCwd49148

DLEP connection issues when router connects to two radios simultaneously.

ESR6300

CSCwd69442

Memory leak under IOMD process.

IR8340

CSCwb52434

BBU alarm pin sometimes gets falsely reported to change status.

IR8140

CSCwe16801

5G module switching to SA mode in 17.9.1.

5G Pluggable - P-5GS6-GL

CSCwd34287

Telit Modem LM960 FN980 FW upgrade failing and needs new FWUploader tool.

Telit Modem LM960 FN980

Abbreviated Cisco Trademarks

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)