Overview
Use this procedure to onboard IR routers to the Application Manager service in Cisco IoT Operations Dashboard.
Add network devices to the Application Manager service of the Cisco IoT Operations Dashboard.
Adding devices to the Application Manager service enables easy deployment and management of applications on the IR routers.
Before you begin
-
Create a device profile in the IoT Operations Dashboard.
-
Note the serial number and product ID of IR routers .
To display the product ID and serial number, use this command on your device's console.
Router# show license udi
Procedure
| 1. | In the Cisco IoT Operations Dashboard, navigate to the Application Manager service. |
|
| 2. | Choose Devices > Staged tab. |
|
| 3. | Click Add Devices . |
|
| 4. | On the Select Add Device Method window, select Single Device . |
|
| 5. | On the Add Device page, enter the product ID, serial number, and name in the respective fields. |
|
| 6. | Click Next . |
|
| 7. | On the Select Device Profile for Assignment page, choose a device profile from the list and click Next. |
|
| 8. | Review the configuration information on the Review page, and click Add Device. |
The new device is listed under Staged Devices, indicating that the device has not been registered with the Cisco IoT Operations Dashboard yet.
What to do next
Perform the IR routers configurations.