Overview
This process describes the workflow for enabling SEA services on industrial routers.
Summary
Enabling SEA services involves multiple stages. The key components or participants involved in the process are:-
Network administrator: Configures and manages the industrial routers.
-
Industrial routers: The device that is prepared and configured for enabling SEA service.
-
Application Manager service: Handles onboarding and device management.
-
SEA agent: An IOx application that runs on the device.
Workflow
These are the stages for enabling SEA service on your industrial routers:
-
Onboard the required Industrial routers through the Application Manager service on IoT OD.
-
Configure the Industrial routers to establish a secure tunnel to the IoT OD for application management.
-
Install the SEA agent on Industrial routers and configure a remote session through SEA for the target OT asset.
Result
The Industrial routers is enabled with SEA service, allowing secure remote access for operational tasks.