- Preface
- New and Changed Information for Segment Routing Features
- YANG Data Models for Segment Routing Features
- About Segment Routing
- Configure Segment Routing over IPv6 (SRv6) with Micro-SIDs
- Configure Segment Routing over IPv6 (SRv6) with Full-Length SIDs
- Configure SRv6 Traffic Engineering
- Configure Segment Routing Global Block and Segment Routing Local Block
- Configure Segment Routing for IS-IS Protocol
- Configure Segment Routing for OSPF Protocol
- Configure Segment Routing for BGP
- Configure SR-TE Policies
- Segment Routing Tree Segment Identifier
- Enabling Segment Routing Flexible Algorithm
- Configure Segment Routing Path Computation Element
- Configure Performance Measurement
- Configure Topology-Independent Loop-Free Alternate (TI-LFA)
- Configure Segment Routing Microloop Avoidance
- Configure Segment Routing Mapping Server
- Using Segment Routing OAM
Segment Routing Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 25.1.x, 25.2.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- June 15, 2025
Feedback