Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 25.1.x, 25.2.x, 25.3.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 16, 2025

Chapter: New and Changed Feature Information

New and Changed Feature Information
Interface and hardware component features added or modified in IOS XR Release 25.x.x

New and Changed Feature Information

This table summarizes the new and changed feature information for the Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, and tells you where they are documented.

Interface and hardware component features added or modified in IOS XR Release 25.x.x

Table 1. New and Changed Features
Feature	Description	Introduced in Release	Where Documented
Minimum-delay bin	This feature was introduced.	Release 25.1.1	Minimum delay bin
Enable egress traffic mirroring in non-ETM mode	This feature was introduced.	Release 25.1.1	VLAN Subinterface as Ingress or Egress Source for Traffic Mirroring

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)