Release Notes for SONiC on Cisco 8000 Series Routers, Release 202405cz.2.3.2
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
SONiC on Cisco 8000 Series Routers, Release 202405cz.2.3.2
SONiC on Cisco 8000 Series Routers, Release 202405cz.2.3.2
SONiC Release 202405cz.2.3.2 adds support for deploying the Cisco 8101-32FH-O in IP Fabric topologies that use BGP. The validation covered the platform capabilities required for the target deployment, including management, dual-stack interfaces, routing, access control, automation, high availability, zero-touch provisioning, quality of service, troubleshooting, and supported optical connectivity. This release also includes the resolved issues listed below.
There are no new software features introduced in this release.
There is no new hardware introduced in this release.
Changes in behavior
There are no changes in behavior in this release.
Table 1. Resolved issues for SONiC on Cisco 8000 Series Routers, Release 202405cz.2.3.2
| Resolved Issues |
Description |
| IPv6 Address were Removed During Zero-Touch Provisioning |
With this Fix, Static IPv6 addresses configured on interfaces are now preserved during the zero-touch provisioning process, eliminating the need for an additional configuration reload to restore them.
|
| False System LED and System Health Fault Indication |
Adjusted memory threshold alerting to avoid system level health faults when memory consumption is less than 90% and updated memory trend monitoring so it no longer influences system-health or LED status. |
Table 2. Open issues for SONiC on Cisco 8000 Series Routers, Release 202405cz.2.3.2
| Bug ID |
Description |
| Port using QSFP-40/100-SRBD in 100G mode is not coming up after image upgrade to 20260607 |
|
| Port using QSFP-100G-CUXM is not coming up between HF6100-32D and non-Hyperfabric platforms |
Table 3. Known issues for SONiC on Cisco 8000 Series Routers, Release 202405cz.2.3.2
| Known Issues |
Description |
| Express Reboot and Log Rotation Timer Coincidence |
In an intermittent timing condition where the log rotation timer expiry exactly coincides with the Express Reboot process, the dockers may perform a cold reboot instead of an express reboot. To prevent this, restart the log rotation timer before the Express Reboot command is triggered. |
| Intermittent Traffic Loss During Express Reboot |
During express reboot, in rare scenarios, a few traffic streams may experience a loss of more than one second. This occurs just after node boots up after express reboot. The system automatically recovers these flows within a few seconds without requiring manual intervention. |
| Missing MAC in Dataplane During Route Churn |
During an intermittent condition with significant route churn, a MAC address may be present in the control plane but missing in the dataplane, causing L2 traffic to be handled as BUM traffic instead of unicast. To resolve this, execute the command vtysh -c "clear bgp l2vpn evpn <neighbor address>". |
This table outlines the versions of various components included in this release.
Table 4. Component version for SONiC on Cisco 8000 Series Routers, Release 202405cz.2.3.2
| Component |
Version |
| Linux Kernel |
6.1.0-11-2-amd64 |
| SAI API |
1.14.0 |
| FRR |
8.5.4 |
| LLDP |
1.0.16-1+deb12u1 |
| TeamD |
1.31-1 |
| SNMPD |
5.9.3+dfsg-2 |
| Python |
3.11.2-1+b1 |
| SYNCD |
1.0.0 |
| swss |
1.0.0 |
| Radvd |
1:2.19-1+b1 |
| ISC-DHCP |
4.4.3-P1-2 |
| sonic-gnmi version |
0.1 |
| redis-server |
5:7.0.15-1~deb12u4 |
| redis-tools version |
5:7.0.15-1~deb12u4 |
| eventd version |
1.0.0-0 |
| mgmt-framework version |
1.0-01 |
Table of supported hardware components and the minimum required software versions.
Table 5. Supported hardware for SONiC on Cisco 8000 Series Routers, Release 202405cz.2.3.2
| Part Number |
Description |
| 8101-32FH-O |
Cisco 8101 1 RU Chassis with 32x400G QSFP-DD with Open Software on Q200L Silicon. |
| 8102-64H-O |
Cisco 8100 2 RU Chassis with 64x100G QSFP28 with Open Software and without HBM on Q200 Silicon. |
Table 6. Related resources
| Resource |
Description |
| Provides documentation for installing and deploying SONiC on Cisco 8000 Series Routers.
|
|
| Introduces use-case-based documentation for SONiC through Learning Labs, offering guidance on use cases and configurations to facilitate deployment. Additionally, it enables experimentation and customization to meet specific network requirements. |
|
| Provides guidance on installing a new SONiC image on Cisco 8000 series routers, covering two installation methods: Open Network Install Environment (ONIE) and the sonic-installer command. |
|
| Provides detailed specifications and feature information for Cisco 8000 Series Routers in the Data Sheet. |
|
| Provides SONiC image download options for Cisco 8000 Series Routers. |
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers.
© 2026 Cisco Systems, Inc. All rights reserved.