Details QoS policy behavior on link bundles, including usage guidelines, restrictions, absolute-value policing and shaping, and configuration procedures for applying policies to bundled Ethernet interfaces.
QoS policies for link bundles
Introduces QoS policy behavior on link bundles, including unified policy application, bandwidth management, member link handling, and load balancing across aggregated Ethernet interfaces.
Usage guidelines for QoS policies on link bundles
Outlines effective approaches and important considerations for applying, managing, and troubleshooting QoS policies on link bundles. These practices help ensure consistent performance, accurate statistics, and proper shaping and scheduling.
Absolute-value policing on bundle interfaces
Describes how absolute-value policing on bundle interfaces enables configuration of fixed ingress policer rates using absolute units such as bps, kbps, Mbps, and Gbps.
Absolute-value shaping on bundle interfaces
Describes how you can configure fixed egress shaping rates on supported bundle interfaces using absolute units such as kbps, mbps, and gbps.
Restrictions for QoS policies on link bundles
Outlines restrictions for QoS policies on link bundles, including supported interface types, bundle member requirements, protocol consistency, shaper limitations, accounting constraints, and scale limits.
Configure QoS policies on link bundles
Provides instructions for applying QoS policies to bundle interfaces, including prerequisites, bundle configuration, inherited policy behavior, and examples for ingress and egress service policies.