Provides information on first-time setup for the Catalyst Center appliance, including logging into the GUI with an HTTPS-enabled browser, initiating the Quick Start workflow to discover managed devices, and enabling telemetry collection.
First-time setup workflow
Information about the Catalyst Center appliance installation.
Compatible browsers
Information about Catalyst Center browser support.
Log in to Catalyst Center for the first time
After you have installed and configured the Catalyst Center appliance, follow these steps to log in to its GUI for the first time.
Complete the Quick Start workflow
Describes how to discover devices and enable telemetry collection for those devices.
Catalyst Center setup methods
You can set up Catalyst Center using one of the available setup methods.
Integrate Cisco ISE with Catalyst Center
Explains how to integrate Cisco ISE and Catalyst Center.
Configure authentication and policy servers
Instructions to configure AAA server and Cisco ISE for Catalyst Center.
Configure SNMP properties
Information about configuring SNMP properties, including retries and timeouts.