Introduces GNSS enhancements in Release 26.1.1, including controller-based enable or disable support and improved runtime status and diagnostic output.
Global Navigation Satellite System (GNSS) is a general term for satellite-based systems that provide positioning, navigation, and timing (PNT) services.
-
GNSS provides positioning and navigation services anywhere on Earth.
-
GNSS delivers position accuracy ranging from a few meters (standard) down to centimeters or millimeters.
-
GNSS enables receivers to synchronize time to within billionths of a second, an essential requirement for telecom, power grids, and financial networks.
From Cisco IOS XE Dublin 17.11.1, GNSS is supported on IW9167EH. The AP tracks GPS information for devices deployed in the outdoor environment and sends the GNSS information to the wireless controller.
Use the following command to display the GNSS information on the AP:
ap# show gnss info
Use the following commands to display the GPS location of the AP:
controller# show ap geolocation summary
controller# show ap name Cisco AP geolocation detail
With Release 26.1.1, two GNSS enhancements are available: an option to enable or disable GNSS from the controller, and improved output for the show gnss info command, offering more detailed runtime status and diagnostics.