Smart licensing using policy on Cisco routers
The Smart Licensing Using Policy chapter has been replaced by a standalone guide called Smart Licensing Using Policy on the Cisco Catalyst IR1101, IR1800, IR8140, IR8340 and ESR6300 Routers.
- Product Overview
- New Features
- Basic Router CLI Configuration
- Web User Interface
- Secure Shell
- Inline Tagging
- NTP Timing Based on GPS Clock
- Managing Configuration Files
- Using Cisco IOS XE Software
- Cisco IOS XE Software Installation Methods
- Installing the Software
- Software Maintenance Upgrade
- Smart Licensing Using Policy
- Ethernet Switch Ports
- IP Device Tracking
- Cellular pluggable interface modules
- P-LTE 450 Support
- Support for MACsec and IPsec Encryption
- Support for the X25 over TCP
- Dying Gasp Support on Ethernet or GigEthernet and SFP Port on IR1101
- 2nd L3 WAN Port for IR1101
- Managing USB Access Control
- Cisco Network Plug and Play Agent
- Cellular Boot Time Improvements
- CLI Output for the FN980 5G Modem
- Supervisory Control and Data Acquisition
- Raw Socket Transport
- IRM-1101 Expansion Module
- IRM-1100-4A2T Expansion Module
- IRM-1100-4S8I expansion module
- IOx Application Hosting
- Cisco SD-WAN Support
- Serial Relay Service
- ROM Monitor
- Digital Subscriber Line
- Out Of Band Management
- HDLC Support for SCATS
- Ethernet VPN Virtual Extensible LAN Over Generic Routing Encapsulation
- Cyber Vision Center
- Troubleshooting
- System Messages
- Environmental Monitoring
- WAN Monitoring
- Process Health Monitoring
- gRPC Network Operations
- Support for YANG
- Cellular Network Slicing
- H-VPLS N-PE Redundancy for MPLS Access
- Segment Routing over IPv6
Feedback