The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL15756
Cisco announces the end-of-sale and end-of-life dates for the Cisco Secure Workload M6 Appliance. The last day to order the affected product(s) is June 1, 2026. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-life milestones and dates for the Cisco Secure Workload M6 Appliance
| Milestone |
Definition |
Date |
| End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
December 1, 2025 |
| End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
June 1, 2026 |
| Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
August 30, 2026 |
| End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
June 1, 2027 |
| End of Vulnerability/Security Support: |
The last date that Cisco Engineering may release a planned maintenance release or scheduled software remedy for a security vulnerability issue. |
May 31, 2031 |
| End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
June 1, 2027 |
| End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
June 1, 2027 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
August 27, 2030 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
May 31, 2031 |
Table 2. Product part numbers affected by this announcement
| End-of-Sale Product Part Number |
Product Description |
Migration Product Part Number |
Migration Product Description |
Additional Information |
| TA-CL-39U-M6-K9 |
Cisco Secure Workload Gen3 39RU Cluster |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-CNODE-G3 |
Cisco Secure Workload Server Type - Compute Node Gen3 |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-BNODE-G3 |
Cisco Secure Workload Server Type - Base Node Gen3 |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-SNODE-G3 |
Cisco Secure Workload Server Type - Serving Node Gen3 |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-C93108TC-FX3P |
Secure Workoad M6 Nexus 9300 48p 10G-T,6p100G QSFP,MACsec,UP |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-C93180YC-FX3 |
Workload M6 Nexus9300 48p10/25G SFP+,6p100G QSFP,MACsec,UP |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-RACK-UCS2-INT |
Cisco R42612 dynamic rack, w/side panels for Tetration |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-RP208-30M1P-PDU |
24A Metered Input 1-Phase 6x C19, 36x C13 - 0U PDU |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-ETH-RJ45-DUAL |
ACCKIT,RJ45 CABLE KIT,TETRATION,DUAL 39RU |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-CAB-KIT-DUAL |
ACCKIT,SFP+ CABLE KIT,TETRATION,DUAL 39RU |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-RACK-OPTION |
Select single rack or dual rack for Tetration Cluster |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-CPU-I5320 |
Secure Workload Intel 5320 2.2GHz/185W 26C/39MB DDR4 2933MHz |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-MR-A32G2RT-H |
32GB DDR4-3200-MHz RDIMM/2Rx4/1.2v |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-M6-HD18TB10K4KN |
Secure Workload M6-1.8 TB 12G SAS 10K RPM SFF HDD (4K) |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-M6-PCIE-C25Q-04 |
Secure Workload M6-VIC 1455 Quad Port 10/25G SFP28 CNA PCIE |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-M6-PSU1-1050W |
Secure Workload M6-1050W AC Power Supply for Rack Server |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-RAID-M6 |
Secure Workload M6-12G Modular RAID controller 2GB cache |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-RIS3H-C220M6 |
Cisco Secure Workload C220 M6 Riser3 HH1 x16 LPBkt-CPU2 |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-M6-SDB960OA1P |
960GB 2.5in Enterprise performance 6GSATA SSD(3X endurance) |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-CNODE-G3= |
Secure Workload Server Type - Compute Node Gen3 Spare |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-SNODE-G3= |
Secure Workload M6 Server Type - Serving Node Gen3 Spare |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-CL-8U-M6-K9 |
Cisco Secure Workload Gen3 8RU Cluster |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-UNODE-G3 |
Cisco Secure Workload-M Server Type - Universal Node Gen3 |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-CAB-KIT-8RU |
ACCKIT,SFP+ CABLE KIT,TETRATION,SINGLE 8RU |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-CPU-I6330N |
Secure Workload Intel6330N 2.2GHz/165W 28C/42MB DDR4 2667MHz |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-MR-A64G2RT-H |
64GB DDR4-3200-MHz RDIMM/2Rx4/1.2v |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-M6-SD19TM1X-EV |
Secure Workload M6-1.9TB 2.5inch Enterprise Value 6GSATASSD |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-M6-SD38TM1X-EV |
Secure Workload M6-3.8TB 2.5inch Enterprise Value 6GSATASSD |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
| TA-UNODE-G3= |
Secure Workload-M Server Type - Universal Node Gen3 spare |
CSW-ONPREM-K9 |
Cisco Secure Workload Software Appliance |
- |
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco Secure Workload M6 Appliance through the Cisco Refresh (certified remanufactured) program. Remanufactured units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Refresh program, go to: https://www.cisco.com/c/en/us/products/remanufactured.html.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/c/en/us/about/takeback-and-reuse/product-recycling.html.
For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/c/en/us/products/eos-eol-policy.html.
For more information about the Cisco Product Warranties, go to: https://www.cisco.com/c/en/us/products/warranty-listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://cway.cisco.com/mynotifications.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.