The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL15906
Cisco announces the end-of-sale and end-of-life dates for the Cisco Meraki MT Product Line. The last day to order the affected product(s) is November 10, 2026. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-life milestones and dates for the Cisco Meraki MT Product Line
| Milestone |
Definition |
Date |
| End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
May 12, 2026 |
| End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
November 10, 2026 |
| Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
February 8, 2027 |
| End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
November 10, 2027 |
| End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
November 10, 2027 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
February 5, 2031 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
November 30, 2031 |
Table 2. Product part numbers affected by this announcement
| End-of-Sale Product Part Number |
Product Description |
| MT10-HW |
Meraki MT10 Indoor Temperature and Humidity Sensor |
| MT11-HW |
Meraki Probe Sensor |
| MT12-HW |
Meraki MT12 Indoor Water Leak Sensor |
| MT14-HW |
Meraki MT14 Indoor Air Quality Sensor |
| MT15-HW |
Meraki MT15 Indoor Air Quality with CO2 Sensor |
| MT20-HW |
Meraki MT20 Indoor Door Open/Close Sensor |
| MT30-HW |
Meraki MT30 Smart Automation Button |
| MT40-HW |
Meraki MT40 Smart Power Monitor and Switch |
| MA-CBL-LEAK-1 |
Meraki MT Water Leak Detection Cable |
| MA-CBL-LEAK-2 |
Meraki Spot Water Leak Detection Adapter for MT12 |
| MA-CBL-TEMP-ME-1 |
Meraki MT Bare Metal Temperature Probe |
| MA-CBL-TEMP-GL-1 |
Meraki MT Glycol Encased Temperature Probe |
| LIC-MT-3Y |
Meraki MT Enterprise License and Support, 3YR |
| LIC-MT-5Y |
Meraki MT Enterprise License and Support, 5YR |
| LIC-MT-7Y |
Meraki MT Enterprise License and Support, 7YR |
| LIC-MT-10Y |
Meraki MT Enterprise License and Support, 10YR |
| MA-PWR-C14-C15-1 |
Meraki Power Cord, C14-C15 Connectors |
There is no replacement available for the Cisco Meraki MT Product Line at this time.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco Meraki MT Product Line through the Cisco Refresh (certified remanufactured) program. Remanufactured units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Refresh program, go to: https://www.cisco.com/c/en/us/products/remanufactured.html.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/c/en/us/about/takeback-and-reuse/product-recycling.html.
For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/c/en/us/products/eos-eol-policy.html.
For more information about the Cisco Product Warranties, go to:
https://www.cisco.com/c/en/us/products/warranty-listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://cway.cisco.com/mynotifications.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.