The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL15870
Cisco announces the end-of-sale and end-of-life dates for the Cisco ASR 920. The last day to order the affected product(s) is March 31, 2027. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-life milestones and dates for the Cisco ASR 920
| Milestone |
Definition |
Date |
| End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
March 31, 2026 |
| End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
March 31, 2027 |
| Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
June 30, 2027 |
| End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
March 30, 2027* |
| End of Vulnerability/Security Support: |
The last date that Cisco Engineering may release a planned maintenance release or scheduled software remedy for a security vulnerability issue. |
September 30, 2028* |
| End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
March 30, 2028 |
| End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
March 30, 2028 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
June 29, 2031 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
March 31, 2032 |
Table 2. Product part numbers affected by this announcement\
| End-of-Sale Product Part Number |
Product Description |
Migration Product Part Number |
Migration Product Description |
Additional Information |
| ASR-920-12CZ-D |
Cisco ASR920 Series - 12GE and 2-10GE - DC model |
8011-12G12X4Y-D |
Cisco 8010 12x1G + 12x10G + 4x25G fixed DC system |
- |
| 8011-16G8X-D |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-D |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-D |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualDC iTEMP Conf-Coat |
- |
||
| ASR-920-12SZ-A |
Cisco ASR920 Series - 12 - 1/10GE SFP, Fixed AC Model |
8011-12G12X4Y-A |
Cisco 8010 12x1G + 12x10G + 4x25G fixed AC system |
- |
| 8011-16G8X-A |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| N540-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540X-4Z14G2Q-A |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual-AC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-A |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualAC iTEMP Conf-Coat |
- |
||
| ASR-920-12SZ-D |
Cisco ASR 920 Series - 12 x1/10GE SFP, Dual DC Model |
8011-12G12X4Y-D |
Cisco 8010 12x1G + 12x10G + 4x25G fixed DC system |
- |
| 8011-16G8X-D |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-D |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-D |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualDC iTEMP Conf-Coat |
- |
||
| ASR-920-12SZ-IM |
Cisco ASR920 Series - 12GE and 4-10GE, 1 IM slot |
8011-12G12X4Y-A |
Cisco 8010 12x1G + 12x10G + 4x25G fixed AC system |
- |
| 8011-12G12X4Y-D |
Cisco 8010 12x1G + 12x10G + 4x25G fixed DC system |
- |
||
| 8011-16G8X-A |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat |
- |
||
| N540X-4Z14G2Q-D |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual-AC iTEMP Conformal Coat |
- |
||
| N540X-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-A |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualAC iTEMP Conf-Coat |
- |
||
| N540X-8Z16G-SYS-D |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualDC iTEMP Conf-Coat |
- |
||
| ASR-920-12SZ-IM++ |
Cisco ASR920 Series - 12GE and 4-10GE, 1 IM slot (TAA) |
8011-12G12X4Y-A |
Cisco 8010 12x1G + 12x10G + 4x25G fixed AC system |
- |
| 8011-12G12X4Y-D |
Cisco 8010 12x1G + 12x10G + 4x25G fixed DC system |
- |
||
| 8011-16G8X-A |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat |
- |
||
| N540X-4Z14G2Q-D |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual-AC iTEMP Conformal Coat |
- |
||
| N540X-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-A |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualAC iTEMP Conf-Coat |
- |
||
| N540X-8Z16G-SYS-D |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualDC iTEMP Conf-Coat |
- |
||
| ASR-920-12SZ-IM-CC |
Cisco ASR920 Conformal Coated - 12GE, 4-10GE, 1 IM slot |
8011-12G12X4Y-A |
Cisco 8010 12x1G + 12x10G + 4x25G fixed AC system |
- |
| 8011-12G12X4Y-D |
Cisco 8010 12x1G + 12x10G + 4x25G fixed DC system |
- |
||
| 8011-16G8X-A |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat |
- |
||
| N540X-4Z14G2Q-D |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual-AC iTEMP Conformal Coat |
- |
||
| N540X-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-A |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualAC iTEMP Conf-Coat |
- |
||
| N540X-8Z16G-SYS-D |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualDC iTEMP Conf-Coat |
- |
||
| ASR-920-24SZ-IM |
Cisco ASR920 Series - 24GE and 4-10GE: Modular PSU and IM |
8011-12G12X4Y-A |
Cisco 8010 12x1G + 12x10G + 4x25G fixed AC system |
- |
| 8011-12G12X4Y-D |
Cisco 8010 12x1G + 12x10G + 4x25G fixed DC system |
- |
||
| 8011-16G8X-A |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat |
- |
||
| N540X-4Z14G2Q-D |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual-AC iTEMP Conformal Coat |
- |
||
| N540X-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-A |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualAC iTEMP Conf-Coat |
- |
||
| N540X-8Z16G-SYS-D |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualDC iTEMP Conf-Coat |
- |
||
| ASR-920-24SZ-M |
Cisco ASR920 Series - 24GE Fiber and 4-10GE: Modular PSU |
8011-12G12X4Y-A |
Cisco 8010 12x1G + 12x10G + 4x25G fixed AC system |
- |
| 8011-12G12X4Y-D |
Cisco 8010 12x1G + 12x10G + 4x25G fixed DC system |
- |
||
| 8011-16G8X-A |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat |
- |
||
| N540X-4Z14G2Q-D |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual-AC iTEMP Conformal Coat |
- |
||
| N540X-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-A |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualAC iTEMP Conf-Coat |
- |
||
| N540X-8Z16G-SYS-D |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualDC iTEMP Conf-Coat |
- |
||
| ASR-920-24SZ-M++ |
Cisco ASR920 Series - 24GE Fiber 4-10GE: Modular PSU (TAA) |
8011-12G12X4Y-A |
Cisco 8010 12x1G + 12x10G + 4x25G fixed AC system |
- |
| 8011-12G12X4Y-D |
Cisco 8010 12x1G + 12x10G + 4x25G fixed DC system |
- |
||
| 8011-16G8X-A |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat |
- |
||
| N540X-4Z14G2Q-D |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual-AC iTEMP Conformal Coat |
- |
||
| N540X-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-A |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualAC iTEMP Conf-Coat |
- |
||
| N540X-8Z16G-SYS-D |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualDC iTEMP Conf-Coat |
- |
||
| ASR-920-24TZ-M |
Cisco ASR920 Series - 24GE Copper and 4-10GE: Modular PSU |
8011-12G12X4Y-A |
Cisco 8010 12x1G + 12x10G + 4x25G fixed AC system |
- |
| 8011-12G12X4Y-D |
Cisco 8010 12x1G + 12x10G + 4x25G fixed DC system |
- |
||
| 8011-16G8X-A |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat |
- |
||
| N540X-4Z14G2Q-D |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual-AC iTEMP Conformal Coat |
- |
||
| N540X-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-A |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualAC iTEMP Conf-Coat |
- |
||
| N540X-8Z16G-SYS-D |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualDC iTEMP Conf-Coat |
- |
||
| ASR-920-4SZ-A |
Cisco ASR920 Series - 2GE and 4-10GE - AC model |
8011-12G12X4Y-A |
Cisco 8010 12x1G + 12x10G + 4x25G fixed AC system |
- |
| 8011-16G8X-A |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| N540-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540X-4Z14G2Q-A |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual-AC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-A |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualAC iTEMP Conf-Coat |
- |
||
| ASR-920-4SZ-D |
Cisco ASR920 Series - 2GE and 4-10GE - DC model |
8011-12G12X4Y-D |
Cisco 8010 12x1G + 12x10G + 4x25G fixed DC system |
- |
| 8011-16G8X-D |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-D |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-D |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-D |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualDC iTEMP Conf-Coat |
- |
||
| ASR-920-12CZ-A= |
Cisco ASR920 Series - 12GE and 2-10GE - AC model |
8011-12G12X4Y-A= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed AC system |
- |
| 8011-16G8X-A= |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| N540-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540X-4Z14G2Q-A= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat Spr |
- |
||
| N540X-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual AC iTEMP Conf-coat Spre |
- |
||
| N540X-8Z16G-SYS-A= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualAC iTEMP Conf Spr |
- |
||
| ASR-920-12CZ-D= |
Cisco ASR920 Series - 12GE and 2-10GE - DC model |
8011-12G12X4Y-D= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed DC system |
- |
| 8011-16G8X-D= |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-D= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat Spr |
- |
||
| N540X-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conf-Coat Spar |
- |
||
| N540X-8Z16G-SYS-D= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualDC iTEMP Conf Spr |
- |
||
| ASR-920-12SZ-A= |
Cisco ASR920 Series - 12 x 1/10GE SFP, Fixed AC Model, Spare |
8011-12G12X4Y-A= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed AC system |
- |
| 8011-16G8X-A= |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| N540-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540X-4Z14G2Q-A= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat Spr |
- |
||
| N540X-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual AC iTEMP Conf-coat Spre |
- |
||
| N540X-8Z16G-SYS-A= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualAC iTEMP Conf Spr |
- |
||
| ASR-920-12SZ-D= |
Cisco ASR 920 Series - 12 x1/10GE, Dual DC Model, Spare |
8011-12G12X4Y-D= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed DC system |
- |
| 8011-16G8X-D= |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-D= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat Spr |
- |
||
| N540X-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conf-Coat Spar |
- |
||
| N540X-8Z16G-SYS-D= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualDC iTEMP Conf Spr |
- |
||
| ASR-920-12SZ-IM= |
Cisco ASR920 Series - 12GE and 4-10GE, 1 IM slot spare |
8011-12G12X4Y-A= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed AC system |
- |
| 8011-12G12X4Y-D= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed DC system |
- |
||
| 8011-16G8X-A= |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D= |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat Spr |
- |
||
| N540X-4Z14G2Q-D= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat Spr |
- |
||
| N540X-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual AC iTEMP Conf-coat Spre |
- |
||
| N540X-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conf-Coat Spar |
- |
||
| N540X-8Z16G-SYS-A= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualAC iTEMP Conf Spr |
- |
||
| N540X-8Z16G-SYS-D= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualDC iTEMP Conf Spr |
- |
||
| ASR-920-24SZ-IM= |
Cisco ASR920 Series - 24GE and 4-10GE: Modular PSU and IM |
8011-12G12X4Y-A= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed AC system |
- |
| 8011-12G12X4Y-D= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed DC system |
- |
||
| 8011-16G8X-A= |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D= |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat Spr |
- |
||
| N540X-4Z14G2Q-D= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat Spr |
- |
||
| N540X-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual AC iTEMP Conf-coat Spre |
- |
||
| N540X-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conf-Coat Spar |
- |
||
| N540X-8Z16G-SYS-A= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualAC iTEMP Conf Spr |
- |
||
| N540X-8Z16G-SYS-D= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualDC iTEMP Conf Spr |
- |
||
| ASR-920-24SZ-M= |
Cisco ASR920 Series - 24GE Fiber and 4-10GE: Modular PSU |
8011-12G12X4Y-A= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed AC system |
- |
| 8011-12G12X4Y-D= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed DC system |
- |
||
| 8011-16G8X-A= |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D= |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat Spr |
- |
||
| N540X-4Z14G2Q-D= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat Spr |
- |
||
| N540X-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual AC iTEMP Conf-coat Spre |
- |
||
| N540X-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conf-Coat Spar |
- |
||
| N540X-8Z16G-SYS-A= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualAC iTEMP Conf Spr |
- |
||
| N540X-8Z16G-SYS-D= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualDC iTEMP Conf Spr |
- |
||
| ASR-920-24TZ-M= |
Cisco ASR920 Series - 24GE Copper and 4-10GE: Modular PSU |
8011-12G12X4Y-A= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed AC system |
- |
| 8011-12G12X4Y-D= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed DC system |
- |
||
| 8011-16G8X-A= |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| 8011-16G8X-D= |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-A= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat Spr |
- |
||
| N540X-4Z14G2Q-D= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat Spr |
- |
||
| N540X-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual AC iTEMP Conf-coat Spre |
- |
||
| N540X-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conf-Coat Spar |
- |
||
| N540X-8Z16G-SYS-A= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualAC iTEMP Conf Spr |
- |
||
| N540X-8Z16G-SYS-D= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualDC iTEMP Conf Spr |
- |
||
| ASR-920-4SZ-A= |
Cisco ASR920 Series - 2GE and 4-10GE - AC model |
8011-12G12X4Y-A= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed AC system |
- |
| 8011-16G8X-A= |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| N540-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540X-4Z14G2Q-A= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat Spr |
- |
||
| N540X-6Z18G-SYS-A= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual AC iTEMP Conf-coat Spre |
- |
||
| N540X-8Z16G-SYS-A= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualAC iTEMP Conf Spr |
- |
||
| ASR-920-4SZ-D= |
Cisco ASR920 Series - 2GE and 4-10GE - DC model |
8011-12G12X4Y-D= |
Cisco 8010 12x1G + 12X1/10G + 4X1/10/25G fixed DC system |
- |
| 8011-16G8X-D= |
Cisco 8010 4x1G, 12x1G, 8X1/10G DC |
- |
||
| N540-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ DC |
- |
||
| N540X-4Z14G2Q-D= |
N540 14x1G + 4x1/10G + 2x10/25G Dual-DC iTEMP Conf-Coat Spr |
- |
||
| N540X-6Z18G-SYS-D= |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual DC iTEMP Conf-Coat Spar |
- |
||
| N540X-8Z16G-SYS-D= |
N540 12/20(CSFP)x1G + 4x1GCu + 8x1/10G DualDC iTEMP Conf Spr |
- |
||
| ASR-920-12CZ-A |
Cisco ASR920 Series - 12GE and 2-10GE - AC model |
8011-12G12X4Y-A |
Cisco 8010 12x1G + 12x10G + 4x25G fixed AC system |
- |
| 8011-16G8X-A |
Cisco 8010 4x1G, 12x1G, 8X1/10G AC |
- |
||
| N540-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ AC |
- |
||
| N540X-4Z14G2Q-A |
NCS540 14x1G + 4x1/10G + 2x10/25G Dual-AC iTEMP Conf-Coat |
- |
||
| N540X-6Z18G-SYS-A |
NCS540 18x1G SFP + 6x1/10G SFP+ Dual-AC iTEMP Conformal Coat |
- |
||
| N540X-8Z16G-SYS-A |
N540 12/20(CSFP)x1G + 4x1GCu +8x1/10G DualAC iTEMP Conf-Coat |
- |
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco ASR 920 through the Cisco Refresh (certified remanufactured) program. Remanufactured units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Refresh program, go to: https://www.cisco.com/c/en/us/products/remanufactured.html.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/c/en/us/about/takeback-and-reuse/product-recycling.html.
For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/c/en/us/products/eos-eol-policy.html.
For more information about the Cisco Product Warranties, go to: https://www.cisco.com/c/en/us/products/warranty-listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://cway.cisco.com/mynotifications.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.