-
Cisco CallManager Administration Guide, Release 3.3(2)
-
Index
-
Preface
-
Introduction
-
Server Configuration
-
Cisco CallManager Configuration
-
Cisco CallManager Group Configuration
-
Date/Time Group Configuration
-
Device Defaults Configuration
-
Region Configuration
-
Device Pool Configuration
-
Automated Alternate Routing Group Configuration
-
Enterprise Parameters Configuration
-
Location Configuration
-
Auto-Registration Configuration
-
Survivable Remote Site Telephony Configuration
-
Partition Configuration
-
Calling Search Space Configuration
-
Route Filter Configuration
-
Route Group Configuration
-
Route List Configuration
-
Route Pattern Configuration
-
Translation Pattern Configuration
-
External Route Plan Wizard
-
Special Characters and Settings
-
Route Plan Report
-
Cisco Messaging Interface Configuration
-
Cisco TFTP Configuration
-
Cisco CallManager Attendant Console Configuration
-
Conference Bridge Configuration
-
Media Termination Point Configuration
-
Transcoder Configuration
-
Media Resource Group Configuration
-
Media Resource Group List Configuration
-
Service Parameters Configuration
-
Call Park Configuration
-
Call Pickup and Group Call Pickup Configuration
-
Cisco IP Phone Services Configuration
-
Meet-Me Number/Pattern Configuration
-
Cisco Voice Mail Port Configuration
-
Cisco Voice Mail Port Wizard
-
Message Waiting Configuration
-
Cisco Voice Mail Pilot Configuration
-
Voice Mail Profile Configuration
-
Device Configuration
-
CTI Route Point Configuration
-
Device Profile Configuration
-
Gatekeeper Configuration
-
Gateway Configuration
-
Cisco IP Phone Configuration
-
Trunk Configuration
-
Phone Button Template Configuration
-
Softkey Template Configuration
-
Adding a New User
-
Searching the Global Directory
-
Plugin Configuration
-
Feedback
Table Of Contents
Meet-Me Number/Pattern Configuration
Adding a Meet-Me Number/Pattern
Updating a Meet-Me Number/Pattern
Deleting a Meet-Me Number/Pattern
Meet-Me Number/Pattern Configuration Settings
Meet-Me Number/Pattern Configuration
Meet-Me conferences require an allocation of directory numbers. Cisco CallManager Administration provides the Meet-Me conference directory number range to users, so they can access the feature.
This section describes the following procedures:
•
Adding a Meet-Me Number/Pattern
•
•
•
Adding a Meet-Me Number/Pattern
This section describes how to add a Meet-Me Number/Pattern.
Before You Begin
Make sure the following prerequisites are met before proceeding with the steps:
•
•
Procedure
Step 1
The Meet-Me Number/Pattern Configuration window displays.
Step 2
Step 3
Step 4
The window refreshes, and the new Meet-Me Number/Pattern appears in the list on the left side of the window.
Related Topics
•
•
•
•
•
•
•
Updating a Meet-Me Number/Pattern
This section describes how to update a Meet-Me Number/Pattern.
Before You Begin
Make sure the following prerequisites are met before proceeding with the steps:
•
•
•
Procedure
Step 1
The Meet-Me Number/Pattern Configuration window displays.
Step 2
The pattern that you chose appears in the Directory Number or Pattern field.
Step 3
Note
Step 4
The window refreshes, and the pattern updates.
Related Topics
•
•
•
•
•
•
•
Deleting a Meet-Me Number/Pattern
This section describes how to delete a Meet-Me Number/Pattern.
Before You Begin
Make sure the following prerequisites are met before proceeding with the steps:
•
•
•
Procedure
Step 1
The Meet-Me Number/Pattern Configuration window displays.
Step 2
Step 3
Related Topics
•
•
•
•
•
•
•
Meet-Me Number/Pattern Configuration Settings
Table 36-1 describes the meet-me number/pattern configuration settings.
Table 36-1 Meet-Me Number/Pattern Configuration Settings
Directory Number or Pattern
Enter a Meet-Me Numbers/pattern or a range of numbers (such as 8000 to 8009).
Partition
To use a partition to restrict access to the meet-me/number pattern, choose the desired partition from the drop-down list box.
If you do not want to restrict access to the meet-me number/pattern, choose <None> for the partition. See the "Partition Configuration" section for more information.
If more than 250 partitions exist, the ellipsis (...) button displays next to the drop-down list box. Click the ... button to display the Select Partition window. Enter a partial partition name in the List items where Name contains field. Click the desired partition name in the list of partitions that displays in the Select item to use box and click OK.
Note
Related Topics
•
