Guest

Cisco Unified Communications Manager (CallManager)

End-of-Sale and End-of-Life Announcement for the Cisco Unified Communications Manager 7.0

  • Viewing Options

  • PDF (52.9 KB)
  • Feedback

EOL6897

Cisco announces the end-of-sale and end-of life dates for the Cisco® Unified Communications Manager 7.0. The last day to order the affected product(s) is April 12, 2010. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco Unified Communications Manager 7.0

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

October 12, 2009

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

April 12, 2010

Last Ship Date:
App. SW, HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

July 11, 2010

End of SW Maintenance Releases Date:
App. SW, HW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

April 12, 2011

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

April 12, 2011

End of New Service Attachment Date:
App. SW, HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

April 12, 2011

End of Service Contract Renewal Date:
App. SW

The last date to extend or renew a service contract for the product.

July 8, 2012

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

July 8, 2014

Last Date of Support:
App. SW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

April 11, 2013

Last Date of Support:
HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

April 11, 2015

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

CM7.0-K9-380D

SW only, CUCM 7.0 for HP DL380-G4/G5- 2CPU or 7845-H1/H2

CM7.1-K9-380G5D

SW Only, Unified CM 7.1 For HP DL380-G5 /2CPU or 7845-H2

CM7.0-K9-7816

SW only, Unified CM 7.0, for IBM or HP 7815/7816

There is currently no replacement product available for this product.

 

CM7.0-K9-DEMO

SW, Unified CM 7.0, 150 DLUs, for internal use only, NFR

CM7.1-K9-DEMO

SW Unified CM 7.1 Appliance Not For Resale

CM7.0-K9-DL320

SW only, CUCM 7.0 for HP DL320-G4/G5 or 7825-H2/H3

CM7.1-K9-DL320G5P

SW Only, Unified CM 7.1 For HP DL320-G5P or 7825-H4

CM7.0-K9-DL380

SW only, CUCM 7.0 for HP DL380-G4/G5- 1CPU or 7835-H2/H3

CM7.1-K9-380G5

SW Only, Unified CM 7.1 For HP DL380-G5 /1CPU or 7835-H2

CM7.0-K9-LAB

SW, Unified CM, 100 DLUs, Lab system only

CM7.1-K9-LAB

SW Unified CM 7.1 Appliance, 100 DLUs, Lab System Only

CM7.0-K9-MIG0=

SW Unified CM 7.0 Same Server Class Migration

CM7.1-K9-MIG0=

SW Unified CM 7.1 Same Server Class Migration

CM7.0-K9-MIG10=

SW Unified CM 7.0 Migration 7835 to 7845

CM7.1-K9-MIG10=

SW Unified CM 7.1 Migration 7835 to 7845

CM7.0-K9-MIG1=

SW Unified CM 7.0 Migration 7815SE to 781X

CM7.1-K9-MIG1=

SW Unified CM 7.1 Migration 7815SE to 781X

CM7.0-K9-MIG2=

SW Unified CM 7.0 Migration 7815SE to 7825

CM7.1-K9-MIG2=

SW Unified CM 7.1 Migration 7815SE to 7825

CM7.0-K9-MIG3=

SW Unified CM 7.0 Migration 7815SE to 7835

CM7.1-K9-MIG3=

SW Unified CM 7.1 Migration 7815SE to 7835

CM7.0-K9-MIG4=

SW Unified CM 7.0 Migration 7815SE to 7845

There is currently no replacement product available for this product.

 

CM7.0-K9-MIG5=

SW Unified CM 7.0 Migration 781X to 7825

CM7.1-K9-MIG5=

SW Unified CM 7.1 Migration 781X to 7825

CM7.0-K9-MIG6=

SW Unified CM 7.0 Migration 781X to 7835

CM7.1-K9-MIG6=

SW Unified CM 7.1 Migration 781X to 7835

CM7.0-K9-MIG7=

SW Unified CM 7.0 Migration 781X to 7845

CM7.1-K9-MIG7=

SW Unified CM 7.1 Migration 781X to 7845

CM7.0-K9-MIG8=

SW Unified CM 7.0 Migration 7825 to 7835

CM7.1-K9-MIG8=

SW Unified CM 7.1 Migration 7825 to 7835

CM7.0-K9-MIG9=

SW Unified CM 7.0 Migration 7825 to 7845

CM7.1-K9-MIG9=

SW Unified CM 7.1 Migration 7825 to 7845

CM7.0-K9-NFR

SW, CUCM 7.0, Not for Resale, 150 DLUs

CM7.1-K9-NFR

SW Unified CM 7.1 Appliance Not For Resale

CM7.0-K9-NFR-TRNG

SW, CUCM 7.0, Not for Resale - Training Partners Only, 150 D

There is currently no replacement product available for this product.

 

CM7.0-K9-NFR=

CUCM 7.0 SW, Not for Resale, 150 DLU

CM7.1-K9-NFR

SW Unified CM 7.1 Appliance Not For Resale

CM7.0-K9-SDK=

CUCM 7.0 SW Development Kit

There is currently no replacement product available for this product.

 

CM7.0-K9-SUP=

SW Upgrade CM6.0/ 6.1 to 7.0 for Cisco SMARTnet?, no upgrade

There is currently no replacement product available for this product.

 

CM7.0-K9-UPG=

Major Release SW Upgrade to 7.0 for SASU or UCSS

CM7.1-K9-UPG=

SW Upgrade to 7.1 for SASU or UCSS

CM7.0-K9-X3250

SW only, CM7.0 for IBM X3250/X306 or 7825-I3

There is currently no replacement product available for this product.

 

CM7.0-K9-X3650

SW only, CM7.0- IBM X3650/X346R, 7979-5AY/I CPU or 7835-I2

CM7.1-K9-X3650

SW Only, Unified CM 7.1 IBM X3650, 7979-5AY/1CPU or 7835-I2

CM7.0-K9-X3650D

SW only, CM7.0- IBM X3650D/X346D, 7979-5AY/2 CPU or 7845-I2

CM7.1-K9-X3650D

SW Only, Unified CM 7.1, IBM X3650D 7979-5AY/2CPU or 7845-I2

CM7.0-U-K9-7815=

SW Upgrade CM 6.0/6.1 to CM 7.0 - 7815

CM7.0-U-K9-7816=

SW Upgrade CM 6.1 to CM7.0 - 7816

CM7.0-U-K9-7815SE=

SW Upgrade CM6.0/ 6.1 to CM 7.0 - 7815SE

CM7.1-U-K9-7815SE=

SW Upgrade to CM 7.1 - 7815SE

CM7.0-U-K9-7816=

SW Upgrade CM 6.1 to CM7.0 - 7816

CM7.0-U-K9-7815=

HASH(0x19a9c2c)

CM7.0-U-K9-7816=

SW Upgrade CM 6.1 to CM7.0 - 7816

CM7.1-U-K9-7816=

SW Upgrade to CM 7.1 - 781X

CM7.0-U-K9-7825=

SW Upgrade CM 6.0/6.1 to CM 7.0 - 7825

CM7.1-U-K9-7825=

SW Upgrade to CM 7.1 - 7825

CM7.0-U-K9-7835=

SW Upgrade CM6.0/ 6.1 to CM 7.0 - 7835

CM7.1-U-K9-7835=

SW Upgrade to CM 7.1 - 7835

CM7.0-U-K9-7845=

SW Upgrade CM 6.0/6.1 to CM 7.0 - 7845

CM7.1-U-K9-7845=

SW Upgrade to CM 7.1 - 7845

CM7.0-U-K9-DL320=

SW Upgrade CM6.0/ 6.1 to CM 7.0 - DL320

CM7.1-U-K9-DL320=

SW Upgrade to CM 7.1 - DL320

CM7.0-U-K9-DL380=

SW Upgrade CM6.0/6.1 to CM 7.0 - DL380 1CPU

CM7.1-U-K9-DL380=

SW Upgrade to CM 7.1 - DL380 1CPU

CM7.0-U-K9-DL380D=

SW Upgrade CM6.0/ 6.1 to CM 7.0 - DL380 2CPU

CM7.1-U-K9-DL380D=

SW Upgrade to CM 7.1 - DL380 2CPU

CM7.0-U-K9-X206=

SW Upgrade CM 6.0/6.1 to CM7.0 - X206

CM7.1-U-K9-X206=

SW Upgrade to CM 7.1 - X206

CM7.0-U-K9-X306=

SW Upgrade CM6.0/ 6.1 to CM 7.0 - X306

CM7.1-U-K9-X306=

SW Upgrade to CM 7.1 - X306

CM7.0-U-K9-X346=

SW Upgrade CM6.0/ 6.1 to CM 7.0 - X346 1CPU

CM7.1-U-K9-X346=

SW Upgrade to CM 7.1 - X346 1CPU

CM7.0-U-K9-X346D=

SW Upgrade CM6.0/ 6.1 to CM 7.0 - X346 2CPU

CM7.1-U-K9-X346D=

SW Upgrade to CM 7.1 - X346 2CPU

CM7.0-U-K9-X3650=

SW Upgrade CM6.0/ 6.1 to CM 7.0 - X3650 1CPU

CM7.1-U-K9-X3650=

SW Upgrade to CM 7.1 - X3650 1CPU

CM7.0-U-K9-X3650D=

SW Upgrade CM 6.0/6.1 to CM7.0 - X3650 2CPU

CM7.1-U-K9-X3650D=

SW Upgrade to CM 7.1 - X3650 2CPU

LIC-CM7.0-7816=

License CM 7.0 7815/7816 Appliance, 500 seats

LIC-CM7.1-7816=

License Unified CM 7.1 7816 Appliance, 500 seats

LIC-CM7.0-7825=

License CM 7.0 7825 Appliance, 1,000 seats

LIC-CM7.1-7825=

License Unified CM 7.1 7825 Appliance, 1,000 seats

LIC-CM7.0-7835=

License CM 7.0 7835 Appliance, 2,500 seats

LIC-CM7.1-7835=

License Unified CM 7.1 7835 Appliance, 2,500 seats

LIC-CM7.0-7845=

License CM 7.0 7845 Appliance, 5,000 seat

LIC-CM7.1-7845=

License Unified CM 7.1 7845 Appliance, 5,000 seat

MCS7835I2-K9-CMC1

HW/SW MCS 7835-I2 Unified CM 7.0 Appliance

MCS7835I2-K9-CMC2

Unified CM 7.1 7835-I2 Appliance, 0 Seats

MCS7845I2-K9-CMC1

HW/SW MCS 7845-I2 Unified CM 7.0 Appliance

MCS7835I2-K9-CMC2

Unified CM 7.1 7835-I2 Appliance, 0 Seats

UNIFIED-CM-7.0

CUCM 7.0 top level part number

UNIFIED-CM7.1

CUCM 7.1 top level part number

Product Migration Options

Customers are encouraged to migrate to the Cisco Unified Communications Manager 7.1. Information about this product can be found at: http://www.cisco.com/en/US/products/sw/voicesw/ps556/index.html.
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html.
Customers may be able to continue to purchase the Cisco Unified Communications Manager 7.0 through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.

For More Information

For more information about the Cisco Unified Communications Manager 7.1, visit http://www.cisco.com/en/US/products/sw/voicesw/ps556/index.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html.

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.