Table Of Contents
Product Overview
Catalyst 4000 Family Switches
Catalyst 2948G Switch
Catalyst 2980G Switch
Supervisor Engine Software
Product Overview
The Catalyst enterprise LAN switches facilitate the migration from traditional shared-hub LANs to large-scale, fully integrated internetworks. These switches provide switched connections to individual workstations, servers, LAN segments, backbones, or other switches, using a variety of media.
This chapter consists of these sections:
•Catalyst 4000 Family Switches
•Catalyst 2948G Switch
•Catalyst 2980G Switch
•Supervisor Engine Software
Catalyst 4000 Family Switches
Note For installation information and a complete description of the Catalyst 4000 family switch hardware, refer to the Catalyst 4000 Family Installation Guide, Catalyst 4500 Family Installation Guide, and the Catalyst 4912G Installation Guide.
Table 1-1 describes the Catalyst 4000 family switches.
Table 1-1 Catalyst 4000 Family Switches
Product Number
|
Chassis Description
|
Catalyst 4000 Series
|
WS-C4003
|
Catalyst 4003
•Modular 3-slot chassis
•Optional redundant power supplies
|
WS-C4006
|
Catalyst 4006
•Modular 6-slot chassis
•30-Gbps backplane
•Two power supplies, with optional third power supply
|
WS-C4912G
|
Catalyst 4912G
•Fixed-configuration switch
•12-Gbps backplane
•Optional redundant power supplies
•12 1000BASE-X (GBIC) Gigabit Ethernet ports
|
Catalyst 4500 Series
|
WS-C4503
|
Catalyst 4503
•Modular 3-slot chassis
•28-Gbps full duplex backplane
•Optional redundant power supplies
|
WS-C4506
|
Catalyst 4506
•Modular 6-slot chassis
•64 Gbps full duplex
•Optional redundant power supplies
|
Catalyst 2948G Switch
Note For installation information and a complete description of the Catalyst 2948G switch hardware, refer to the Catalyst 2948G and 2980G Installation Guide.
Table 1-2 describes the Catalyst 2948G switch.
Table 1-2 Catalyst 2948G Switch
Product Number
|
Chassis Description
|
WS-C2948G
|
Catalyst 2948G
•Fixed-configuration switch
•12-Gbps backplane
•Optional redundant power supplies
•Two 1000BASE-X (GBIC) Gigabit Ethernet ports
•48 10/100BASE-TX Fast Ethernet ports
|
Catalyst 2980G Switch
Note For installation information and a complete description of the Catalyst 2980G switch hardware, refer to the Catalyst 2948G and 2980G Installation Guide.
Table 1-3 describes the Catalyst 2980G switch.
Table 1-3 Catalyst 2980G Switch
Product Number
|
Chassis Description
|
WS-C2980G
|
Catalyst 2980G
•Fixed-configuration switch
•12-Gbps backplane
•Optional redundant power supplies
•Two 1000BASE-X (GBIC) Gigabit Ethernet ports
•80 10/100BASE-TX Fast Ethernet ports
|
Supervisor Engine Software
The supervisor engine software is factory installed on every supervisor engine module or fixed-configuration switch. Some modules require an additional software image, which is factory installed on the module.
The Catalyst enterprise LAN switches share a command-line interface (CLI) with which you can configure modules and ports on the switches. For more information, see "Using the Command-Line Interface." For descriptions of the available CLI commands, refer to the Command Reference—Catalyst 4000 Family, Catalyst 2948G, and Catalyst 2980G Switches.