Package Contents
You can order Cisco NCS 1010 as assembled chassis (NCS1010-SYS) or as empty chassis (NCS1010-SA) along with the components. See PIDs for all PIDs of the NCS 1010 components.
The shipped package contains the following:
-
Cisco NCS chassis.
-
Accessory kit (NCS1010-ACC-KIT)―Includes all the hardware necessary for the chassis installation on the 19" rack. You can order the accessory kits for ETSI (NCS1010-ETSI-KIT) and 23" ANSI (NCS1010-23-KIT) racks as required. The following table describes the contents of the accessory kits.
Table 1. Accessory Kit Contents Accessory Kit
Contents
NCS1010-ACC-KIT
This kit has the following items for chassis installation on a 19" rack:
-
Double hole ground lug (1x)
-
M5 Pan head screws (2x)
-
12–24 Pan head screws (8x)
-
External tooth washers (2x)
-
Standoffs (2x)
-
Left slide rail (1x)
-
Right slide rail (1x)
-
Protection cover (1x)
NCS1010-23-KIT
This kit has the following items for chassis installation on an ANSI 23" rack:
-
23" rack to 19" rack adapter
-
12–24 Screws (14x)
NCS1010-ETSI-KIT
This kit has the following items for chassis installation on an ETSI rack:
-
ETSI rack to 19" rack adapter
-
M6 screws (8x)
-
Ground adapter
-
-
Field replaceable modules such as PSUs, controller, fan trays, air filter, and line card (the variant of line card that you have ordered).
-
AC and DC power cables that you have ordered. See Supported Cables.