この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
このセクションのすべての手順を A 側と B 側のサーバで実行します。
Packaged CCE は、インストールしている Packaged CCE のリリースでサポートされる特定のバージョンの VMware マニュアル(VMware サイト)で検索可能な標準のインストール手順を使用します。
Packaged CCE では、ESXi をサーバのデフォルトのブート ドライブとして最初のドライブにインストールする必要があること以外の固有の要件がありません。
http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-host-management-guide.pdf で、vCenter サーバおよびホスト管理のマニュアルを参照してください。
(注) |
vCenter は、ゴールデン テンプレートにのみ必要です。 |
vCenter を使用していないお客様は管理デスクトップにインストールして、Packaged CCE サーバを管理できます。
RAID 設定をセットアップした後、このユーティリティを実行して、データストア設定を正しい状態にします。
ステップ 1 | http://software.cisco.com/download/type.html?mdfid=284360381&i=rmの [Packaged CCE Download Software] ページから Packaged CCE RAID Config Validator ユーティリティをダウンロードします。 このユーティリティは、Java jre または jdk がインストールされたコンピュータ上でローカルに抽出し、実行できる zip ファイルです。 |
ステップ 2 |
Windows コマンド プロンプトを開き、ファイルをダウンロードしたディレクトリに変更します。 次に、java -jar PackagedCCEraidConfigValidator-10.0.jar <IP Address of the Side A server> <username> <password> コマンドを入力して、ツールを実行します。
C:\Users\Administrator\Desktop>java -jar PackagedCCEraidConfigValidator-10.0.jar xx.xx.xxx.xxx userName password 有効または無効の設定のインジケータが表示されます。 |
ステップ 3 | ステップ 3 の B 側サーバの IP アドレスを入力して、ステップ 2 を繰り返し行ってください。 |
ユーティリティが無効の設定を報告する場合、RAID 構成を再作成する必要があります。 これには、RAID 構成をリセットし、ESXi を再びインストールし、RAID Config Validator ユーティリティを再実行して、設定を再検証する必要があります。
Packaged CCE では、ソリューションのすべての部分が同じ時刻に設定されている必要があります。 時間のずれは自然に発生しますが、ソリューション コンポーネントの同期を維持するために NTP を設定することは重要です。
ライブ データ レポートの時間のずれを回避するには、データ サーバ VM の NTP 設定、コール サーバの VM、および Cisco Unified Intelligence Center パブリッシャとサブスクライバの VM が同期されている必要があります。
Packaged CCE ドメインが常駐する(同じであるか、親またはピア)フォレストの Windows Active Directory PDC エミュレータ マスターが、外部時刻源を使用するように適切に設定されている必要があります。 この外部時刻源は信頼できる確実な NTP プロバイダーである必要があり、お客様のフォレストにすでに設定されている場合は、Packaged CCE ソリューションのこのセクションに記載されているように、他のすべてのアプリケーションで同じ時刻源として使用されており、使用可能である必要があります。
Microsoft Windows Server のドメインは、ハードウェア障害または別の方法で、PDC エミュレータ マスター サーバが失われると、ドメインの権限のある内部時刻源を自動的に回復したり、内部時刻源のフェールオーバーを行いません。 『Time Service Configuration on the DCwith PDC Emulator FSMO Role』の記事は、ドメインの権限のある内部時刻源になるように新しいターゲット サーバをさらに追加する必要性について補助的に説明します。 また、別のドメイン コントローラに対する PDC FSMO の役割の回復、確保、または再割り当ての手動による介入について説明します。
ドメインの Windows ホストは、権限のある内部時刻源を持つ PDC エミュレータで、またはドメイン フォレスト階層で同じように連結されて、PDF エミュレータと時間を同期するように自動的に設定されます。
(注) |
NTP サーバのカンマ区切りリストを使用して、ピアを置き換えます。 |
すべての Packaged CCE ESXi ホスト(任意のコンポーネントを含む)は、外部時刻源として Windows ドメイン PDC エミュレータ マスターによって使用される同じ NTP サーバを指している必要があります。 『Timekeeping best practices for Windows, including NTP (1318)』を参照してください。
Cisco IOS 音声ゲートウェイは、ログインおよびデバッグの正確な時間を提供するためにソリューションで同じ NTP ソースを使用するように設定する必要があります。 『Basic System Management Configuration Guide, Cisco IOS Release 15M&T: Setting Time and Calendar Services』を参照してください。
Unified Intelligence Center、Finesse、Social Miner、および Unified Communications Manager などのコンポーネントは、ドメインの権限のある内部時刻源と同じ NTP サーバを指している必要があります。
NTP サーバの CLI コマンド
目次
このセクションのすべての手順を A 側と B 側のサーバで実行します。
- C240 MS3 TRC#1 の RAID の設定
- C260 M2 TRC#1 の RAID の設定
- VMware vSphere ESXi のインストール
- RAID Config Validator ユーティリティの実行
- NTP および時刻同期
C240 MS3 TRC#1 の RAID の設定
手順
C260 M2 TRC#1 の RAID の設定
手順
VMware vSphere ESXi のインストール
Packaged CCE は、インストールしている Packaged CCE のリリースでサポートされる特定のバージョンの VMware マニュアル(VMware サイト)で検索可能な標準のインストール手順を使用します。
Packaged CCE では、ESXi をサーバのデフォルトのブート ドライブとして最初のドライブにインストールする必要があること以外の固有の要件がありません。
vCenter へのカスタマー ESXi ホストの追加
http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-host-management-guide.pdf で、vCenter サーバおよびホスト管理のマニュアルを参照してください。
(注)
vCenter は、ゴールデン テンプレートにのみ必要です。
vCenter を使用していないお客様は管理デスクトップにインストールして、Packaged CCE サーバを管理できます。
RAID Config Validator ユーティリティの実行
手順
ステップ 1 http://software.cisco.com/download/type.html?mdfid=284360381&i=rmの [Packaged CCE Download Software] ページから Packaged CCE RAID Config Validator ユーティリティをダウンロードします。 このユーティリティは、Java jre または jdk がインストールされたコンピュータ上でローカルに抽出し、実行できる zip ファイルです。 ステップ 2 Windows コマンド プロンプトを開き、ファイルをダウンロードしたディレクトリに変更します。 次に、java -jar PackagedCCEraidConfigValidator-10.0.jar <IP Address of the Side A server> <username> <password> コマンドを入力して、ツールを実行します。 次に例を示します。検証が開始していることを示すメッセージがモニタに表示されます。C:\Users\Administrator\Desktop>java -jar PackagedCCEraidConfigValidator-10.0.jar xx.xx.xxx.xxx userName password有効または無効の設定のインジケータが表示されます。
ステップ 3 ステップ 3 の B 側サーバの IP アドレスを入力して、ステップ 2 を繰り返し行ってください。
次の作業
ユーティリティが無効の設定を報告する場合、RAID 構成を再作成する必要があります。 これには、RAID 構成をリセットし、ESXi を再びインストールし、RAID Config Validator ユーティリティを再実行して、設定を再検証する必要があります。
NTP および時刻同期
Packaged CCE では、ソリューションのすべての部分が同じ時刻に設定されている必要があります。 時間のずれは自然に発生しますが、ソリューション コンポーネントの同期を維持するために NTP を設定することは重要です。
ライブ データ レポートの時間のずれを回避するには、データ サーバ VM の NTP 設定、コール サーバの VM、および Cisco Unified Intelligence Center パブリッシャとサブスクライバの VM が同期されている必要があります。
Windows Active Directory ドメイン
Packaged CCE ドメインが常駐する(同じであるか、親またはピア)フォレストの Windows Active Directory PDC エミュレータ マスターが、外部時刻源を使用するように適切に設定されている必要があります。 この外部時刻源は信頼できる確実な NTP プロバイダーである必要があり、お客様のフォレストにすでに設定されている場合は、Packaged CCE ソリューションのこのセクションに記載されているように、他のすべてのアプリケーションで同じ時刻源として使用されており、使用可能である必要があります。
NTP 外部時刻源の Windows Active Directory ドメインを適切に設定するには、次の参考資料を参照してください。Microsoft Windows Server のドメインは、ハードウェア障害または別の方法で、PDC エミュレータ マスター サーバが失われると、ドメインの権限のある内部時刻源を自動的に回復したり、内部時刻源のフェールオーバーを行いません。 『Time Service Configuration on the DCwith PDC Emulator FSMO Role』の記事は、ドメインの権限のある内部時刻源になるように新しいターゲット サーバをさらに追加する必要性について補助的に説明します。 また、別のドメイン コントローラに対する PDC FSMO の役割の回復、確保、または再割り当ての手動による介入について説明します。
ドメインの Windows コンポーネント
ドメインの Windows ホストは、権限のある内部時刻源を持つ PDC エミュレータで、またはドメイン フォレスト階層で同じように連結されて、PDF エミュレータと時間を同期するように自動的に設定されます。
ドメインにない Windows コンポーネント
ドメインに結合されていない Windows Server の NTP 時刻源を設定するには、次の手順を使用してください。
[コマンド プロンプト(Command Prompt)] ウィンドウで、次の行を入力して、Enter キーを押します。 w32tm /config /manualpeerlist:PEERS /syncfromflags:MANUAL
(注)
NTP サーバのカンマ区切りリストを使用して、ピアを置き換えます。- w32time サービスを再開します:net stop w32time && net start w32time。
- ピアと w32time サービスを同期します:w32tm /resync。
- 次のサービス コントロール コマンドを使用して、サーバの再起動で w32time サービスが適切に起動していることを確認します:sc triggerinfo w32time start/networkon stop/networkoff。
ESXi ホスト
すべての Packaged CCE ESXi ホスト(任意のコンポーネントを含む)は、外部時刻源として Windows ドメイン PDC エミュレータ マスターによって使用される同じ NTP サーバを指している必要があります。 『Timekeeping best practices for Windows, including NTP (1318)』を参照してください。
Cisco サービス統合型ルータ
Cisco IOS 音声ゲートウェイは、ログインおよびデバッグの正確な時間を提供するためにソリューションで同じ NTP ソースを使用するように設定する必要があります。 『Basic System Management Configuration Guide, Cisco IOS Release 15M&T: Setting Time and Calendar Services』を参照してください。