- About this Guide
- 5G Architecture
- 5G-UPF Overview
-
- 1:1 Redundancy
- APN ACL Support
- APN AMBR Traffic Policing
- Bulk Statistics Support
- Charging Support
- Collection and Reporting of Usage Data over N4 Interface
- Control Plane-Initiated N4 Association Support
- Converged Datapath
- Deep Packet Inspection and Inline Services
- Device ID in EDNS0 Records
- Downlink Data Notification
- DSCP Markings For Collapse Calls
- Dynamic and Static PCC Rules
- GTP-U Support
- Heartbeat Support for N4/Sx Interface
- Idle Mode Buffering and Paging
- Indirect Forwarding Tunnel
- LTE - Wi-Fi Seamless Handover
- Monitor Subscriber
- Multiple cnSGW Support
- Multiple N4/Sx Interface
- N:M Redundancy and Redundancy Configuration Manager
- N3 Transfer of PDU Session Information
- N4 Interface Compliance with 3GPP Specification
- N4 Interface Configuration
- N4 Session Management, Node Level, and Reporting Procedures
- New Standard QCI Support
- UPF Ingress Interface
- UPF Local Configuration
- UPF Reporting of Load Control Over N4 Interface
- Session Recovery
- Session Report Rejection Procedure
- Smart Licensing
- Virtual Routing and Forwarding
- Voice over New Radio
UCC 5G UPF Configuration and Administration Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- October 29, 2021
Feedback