Fixed domains and country codes (ROW)

Configuring and Verifying Regulatory Domain from CLI

To configure country code for ROW (Rest of the World) domain, use the following CLI command:

Device# configure countrycode [countrycode]
Example: 
Configure countrycode GB

The above CLI reports an error if the configured country code is not included in ROW and the wireless interface does not work properly if the country code is not configured.


Note

Reboot the device before configuring other wireless parameters such as frequency, channel width, and after configuring country code. Setting the country code is only applicable for access points with the -ROW domain, such as IW9167EH-ROW.

To verify status of regulatory domain, use the following show command:
Device# show version | in Product
Product/Model Number: IW9167EH-ROW
To verify status of ROW (Rest of the World) country code, use the following show command:
Device# show dot11Radio <interface> config
Example:
Device# show dot11Radio 1 config
…….
DFS region : GB
DFS radar role : auto
Radar Detected : 0
Indoor deployment: disable

Configuring Regulatory Domain from GUI

Wireless interfaces fails to work if country code is not configured. To configure the regulatory domain:

  1. Click the wireless radio under GENERAL SETTINGS in the left-hand settings menu.

  2. For ROW domain, if the country code is not selected, the following pop-up appears:

  3. To select a country code, click the pop-up displays in the below image then it redirects to Web UI wireless section for selecting country code. In the Wireless Settings section, choose country from drop-down list. A confirmation pop-up appears.

  4. Click Confirm. A reboot confirmation screen appears.

  5. Click Yes.

  6. In the MANAGEMENT SETTINGS, click status. In the STATUS page, check the details of operating region and country for confirmation.

  7. To establish a wireless connection between URWB devices, set a same operating frequency in radio units. Shared Passphrase must be the same for all the URWB devices belonging to the same network.

    The below image shows the configuration of regularity domain from GUI:

Supporting Fixed Domains and Country Codes (ROW)

The ROW reg domain simplifies the domain management of the manufacturing process for all regulatory domains that do not have a specific domain mapped. The fixed domain and country code support for the Catalysts IW9167E, IW9165E, and IW9165D access points are described in this section.

Catalyst IW9167E Supported Fixed Domains

Domain

Indoor Deployment Support

A

No

B

*

E

Yes

F

No

Q

No

Z

No

Note

Outdoor and indoor frequencies are the same for the B domain.

Configuration for error handling using CLI

Example:

Device# configure wireless indoor-deployment enable
                 IW9167EH supports indoor deployment on domain E and ROW(GB) only.

Catalyst IW9167E Supported Country Codes (ROW)

Domain ROW Country Code

Indoor Deployment Support

KR (Korea)

No

VN (Vietnam)

*

GB (Great Britain)

Yes

IN (India)

No

PE (Peru)

No

PH (Philippines)

No

Note

Only the listed country codes can be selected using CLI or Web UI.

For ROW domain, select the country code for the device to work.

Configuration for error handling using CLI

Example:

Device# configure wireless indoor-deployment enable
                 IW9167EH supports indoor deployment on domain E and ROW(GB) only.

Catalyst IW9165E Supported Fixed Domains

Domain

Indoor Deployment Support

A

Yes

B

*

E

Yes

Z

Yes

Note

Outdoor and indoor frequencies are the same for the B domain.

Configuration for error handling using CLI

Example:

Device# configure wireless indoor-deployment enable
                 IW9165E supports indoor deployment on domain A,E,Z and ROW(GB) only.

Catalyst IW9165E Supported Country Codes (ROW)

Domain ROW Country Code

Indoor Deployment Support

GB (Great Britain)

Yes

Note

Only the listed country codes can be selected using CLI or Web UI.

For ROW domain, select the country code for the device to work.

Configuration for error handling using CLI

Example:

Device# configure wireless indoor-deployment enable
                 IW9165E supports indoor deployment on domain A,E,Z and ROW(GB) only

Catalyst IW9165D Supported Fixed Domains

Domain

Indoor Deployment Support

A

No

B

*

E

Yes

Z

No

Note

Outdoor and indoor frequencies are the same for the B domain.

Configuration for error handling using CLI

Example:

Device# configure wireless indoor-deployment enable
                 IW9165DH supports indoor deployment on domain E and ROW(GB) only.

Catalyst IW9165DH Supported Country Codes (ROW)

Domain ROW Country Code

Indoor Deployment Support

GB (Great Britain)

Yes

Note

Only the listed country codes can be selected using CLI or Web UI.

For ROW domain, select the country code for the device to work.

Configuration for error handling using CLI

Example:

Device# configure wireless indoor-deployment enable
                 IW9165DH supports indoor deployment on domain E and ROW(GB) only.