First Published: April 29, 2025

Introduction

Release date April 10, 2025

These release notes describe the recommended practices and known issues that apply to software version 1.12 of the IOS Cisco Business Mobile App.

What's New

Cisco Business Mobile App IOS version 1.12 introduces the following new features and changes:

Tablet View Support: Our app now fully supports tablet views on both iOS and Android platforms, providing an enhanced user experience with improved layout and navigation.

Switch Port Descriptions: Users can now add descriptions to switch ports at local sites, making it easier to manage and identify network configurations.

Caveats

Table 1. Open Caveats

Caveat ID Number

Headline
CSCwo63338

iOS: job floating button cannot be moved.

System Requirements for Cisco Business Mobile app

The Cisco Business Mobile app is supported for Apple iOS-based devices running iOS version 13.0 and above. The following devices may be managed by the Cisco Business Mobile app:

  • Cisco Business 220 Series Smart Switches

  • Cisco Business 250 Series Smart Switches

  • Cisco Business 350 Series Managed Switches

  • Cisco Business 100 Series Access Points

  • Cisco Business 100 Series Mesh Extenders

  • Cisco Business 200 Series Access Points

  • Cisco Catalyst 1200 and 1300 Series switches.


Note

Cisco Business 350 Series switches with 10Gb Ethernet switch ports and a dedicated out of band (OOB) management port are not able to be installed and configured using the app. Affected models include: CBS350-8XT, CBS350-12XT, CBS350-24XT, CBS350-48XT-4X, CBS350-12XS, CBS350-24XS, CBS350-16XTS, and CBS350-24XTS.

Limitations and Restrictions

The Cisco Business Mobile app is subject to the following limitations and restrictions:

  • For devices to be managed by the Cisco Business Mobile app, they must be in an unconfigured state before being added to the site and configured by the app. If a device has been previously configured by any means, it should be reset back to an unconfigured state (factory default) before it is configured by the app.

  • Cisco Business switches need to connect to an existing Wi-Fi network to be managed by Cisco Business mobile app. Please refer to the quick start guide that comes with the switches for detailed instructions.

  • The Cisco Business Mobile app is not currently optimized for the iPad. The app may be used with an iPad, but will operate in iPhone compatibility mode.