Release Notes for Cisco UCS X580p PCIe Node Firmware, Release 6.0
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
Cisco UCS X580p PCIe Node Firmware, Release 6.0
The Cisco UCS X580p PCIe Node is the latest PCIe resource node for the UCS X-Series Modular System. It delivers high-performance GPU support for workloads such as generative and agentic AI fine-tuning, inference, and other applications that require GPU acceleration.
The Cisco UCS X580p PCIe Node supports up to four PCIe GPUs. It can be paired with the Cisco UCS X210c M8 server (with Intel® Xeon® processors) or the UCS X215c M8 server (with EPYC processors). The X580p uses Cisco UCS X-Fabric technology for GPU connectivity.
Note: The Cisco UCS X580p PCIe Node is compatible only with the Cisco UCS X9516 X-Fabric Module.
The Cisco UCS X580p occupies 2 node slots in the X9508 chassis, and each 7RU Cisco UCS X9508 chassis supports up to 2 PCIe nodes. Each X580p node supports a maximum of 4 GPUs and allows assignment of 1, 2, or 4 GPUs to a single server. Alternatively, you can assign 1 or 2 GPUs each to 2 separate servers, provided that all GPUs assigned to a single server are of the same type.
Note: Assigning 3 GPUs to a single server is not supported.
For more information, see Cisco UCS X580p PCIe Node Installation and Service Guide and Cisco UCS X580p PCIe Node Spec Sheet.
Minimum firmware requirements for support of X580p PCIe node
● X580p PCIe node firmware: 6.0(1.252044)
● X9508 chassis firmware: 6.0(1.252044)
● Cisco UCS X-Series M8 server firmware: 6.0(1.252039)
● Fabric Interconnect infrastructure firmware: 6.0(1.250229)
Note: The X580p PCIe node firmware images and the X9508 chassis firmware images are available as separate bundles.
Revision history
| Date |
Description |
| December 18, 2025 |
Updated release notes for Cisco UCS X580p PCIe Node, Release 6.0(1.252050). |
| December 11, 2025 |
Created release notes for Cisco UCS X580p PCIe Node, Release 6.0(1.252044). |
New hardware in release 6.0.1.252050
No new hardware is introduced in this release.
New hardware in release 6.0.1.252044
● Support for Cisco UCS X210c M8 and X215c M8 servers.
● Support for Cisco UCS X9508 Chassis.
For detailed information on Cisco UCS X9508 Chassis, see Release Notes for Cisco UCS X9508 Chassis Firmware, Release 6.0.
● Support for Cisco UCS X9516 X-Fabric Module.
Resolved issues in release 6.0(1.252050)
There are no resolved issues in this release.
Resolved issues in release 6.0(1.252044)
There are no resolved issues in this release.
Open issues in release 6.0(1.252050)
There are no open issues in this release.
Open issues in release 6.0(1.252044)
There are no open issues in this release.
Note: The X580p PCIe node firmware is available as a separate bundle.
X580p PCIe node firmware bundle for 6.0(1.252050)
Cisco UCS X580p PCIe node firmware bundle 6.0(1.252050) contains the following image:
ucs-ucsx-580p-huu-6.0.1.252050.iso
| Component |
Packaged version |
| CIMC |
6.0(1.252050) |
| Device Connector |
1.0.11-20251004130616137 |
X580p PCIe node firmware bundle for 6.0(1.252044)
Cisco UCS X580p PCIe node firmware bundle 6.0(1.252044) contains the following image:
ucs-ucsx-580p-huu-6.0.1.252044.iso
| Component |
Packaged version |
| CIMC |
6.0(1.252044) |
| Device Connector |
1.0.11-20251004130616137 |
● Release Notes for Cisco UCS X9508 Chassis Firmware, Release 6.0
● Release Notes for Cisco Intersight Managed Mode Infrastructure Firmware, Release 6.0
● Release Notes for Cisco Intersight Managed Mode Server Firmware, Release 6.0
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2025 Cisco Systems, Inc. All rights reserved.