- Preface
- New and Changed Information
- Overview
- Configuring VXLAN
- Configuring the Underlay
- Configuring VXLAN BGP EVPN
- Configuring VXLAN with IPv6 in the Underlay (VXLANv6)
- Configuring External VRF Connectivity and Route Leaking
- Configuring BGP EVPN Filtering
- Configuring VXLAN OAM
- Configuring vPC Multi-Homing
- Configuring Multi-Site
- Configuring Tenant Routed Multicast (TRM)
- Configuring Cross Connect
- Configuring Port VLAN Mapping
- Configuring IGMP Snooping
- Configuring VLANs
- Service Redirection in VXLAN Fabrics
- Configuring ACL
- Configuring Secure VXLAN EVPN Multi-Site Using CloudSec
- Configuring VXLAN QoS
- Configuring vPC Fabric Peering
- Configuring Seamless Integration of EVPN with L3VPN (MPLS LDP)
- Configuring Seamless Integration of EVPN with L3VPN (MPLS SR)
- Configuring Seamless Integration of EVPN with L3VPN SRv6
- Configuring Seamless Integration of EVPN (TRM) with MVPN
- Configuring Bud Node
- DHCP Relay in VXLAN BGP EVPN
- Configuring Layer 4 - Layer 7 Network Services Integration
- Configuring Multi-Homing
- Configuring Proportional Multipath for VNF
- Index
Cisco Nexus 9000 Series NX-OS VXLAN Configuration Guide, Release 9.3(x)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- September 22, 2021
Feedback