Prepare the site to install your N93180YC-FX3 switch.
Temperature requirements
This section describes the required environmental temperature operating ranges for the Cisco N93180YC-FX3.
Humidity requirements
This topic explains the effects of high humidity on the Cisco N93180YC-FX3 switch, including potential moisture damage and corrosion, and specifies the acceptable operating and nonoperating humidity ranges.
Altitude requirements
This topic explains the altitude requirements for operating the Cisco N93180YC-FX3 switch.
Dust and particulate requirements
This topic explains how to keep your switch environment free of dust and particles.
Minimizing electromagnetic and radio frequency interference
This topic explains the effects of electromagnetic interference (EMI) and radio frequency interference (RFI) from the switch on nearby devices such as radios, televisions, and telephones, and outlines guidelines to reduce EMI and RFI.
Shock and vibration requirements
This topic explains whether the switch will withstand shock and vibration.
Preventing electrostatic discharge damage
This topic explains why you must use and regularly test electrostatic discharge (ESD) preventive wrist straps to protect switch components from static electricity damage.
Ground requirements
This topic explains how to ground the switch to avoid voltage issues.
Plan for power requirements
This topic explains how to prepare power requirements for the Cisco N93180YC-FX3 switch.
Airflow requirements
This topic explains how to identify and configure the correct airflow direction for the Cisco N93180YC-FX3 switch.
Rack and cabinet requirements
This topic explains the types of racks and cabinets suitable for installing your switch.
Clearance requirements
This topic explains the required chassis clearances between the chassis and any other rack, device, or structure for installation, cable routing, airflow, and maintenance.
Network Equipment-Building System (NEBS) Statements
This topic explains the NEBS statements for safety, spatial and environmental design that are applicable to the Cisco N93180YC-FX3 switches.