The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
You can install the Cisco Nexus 1000V VSM on the Cisco Cloud Services Platform. For more information, see the documentation at http://www.cisco.com/en/US/products/ps12752/index.html.
Note Layer 3 mode is supported for the Cisco Nexus 1000V for Hyper-V.
Copy the ISO file to the boot flash:repository/ of the virtual service blade as displayed in the following example:
Complete the following steps to install the VSM on the Cloud Services Platform:
Step 1 Create a virtual service blade by entering the following commands:
Step 2 Configure the control and packet VLANs for static and flexible topologies. Note that no provisioning is allowed for a management VLAN because the management class interface uses the management VLAN of the Cisco Cloud Services Platform.
Step 3 Configure the Cisco Nexus 1000V on the Cisco Cloud Services Platform.
Step 4 Display the primary and secondary VSM status.