setinservice
setinservice
Syntax Description
setinservice |
Put the node ports back in service. |
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
setinservice
setinservice |
Put the node ports back in service. |
show { { ip eigrp {topology | route} [prefix | active | pending | zero-successors | all-links] vrf {vrf-name | all} } | { ipv6 eigrp {topology | route} [ipv6-prefix | active | pending | zero-successors | all-links] vrf {vrf-name | all} } }
show |
Show running system information. |
ip |
Display EIGRP information for IPv4 address family. |
eigrp |
Show EIGRP information. |
topology |
Display information on EIGRP topology (routes). |
route |
Display information on EIGRP routes. |
active |
Show Information on Active Routes only. |
pending |
Show Information on only the Routes pending on any replies. |
zero-successors |
Show Information on only the Routes having Zero Successors. |
all-links |
Show all Nexthops of a Route, not just Feasible Successors. |
prefix |
Show information on this Prefix only. The type is ipprefix. |
ipv6-prefix |
Show information on this ipv6 Prefix only. The type is ipv6_prefix. |
vrf |
Show EIGRP information per-VRF. |
vrf-name |
Name of the VRF. The type is string. |
all |
Show EIGRP information for all VRF. |
ipv6 |
Display EIGRP information for IPv6 address family. |
show { { ip eigrp neighbors [detail] {iface0 | { [ address ] vrf {vrf-name| all} }}} | { ipv6 eigrp neighbors [detail] {iface0 | { [ ipv6-address] vrf {vrf-name| all} }}}}
show |
Show running system information. |
ip |
Display EIGRP information for IPv4 address family. |
ipv6 |
Display EIGRP information for IPv6 address family. |
eigrp |
Show EIGRP information. |
neighbors |
Display information on EIGRP neighbors (peers). |
detail |
Show detailed Information on Neighbors. |
iface0 |
Show Peers on this interface only. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
address |
Peer Address. The type is ipaddr. |
ipv6-address |
ipv6 Peer Address. The type is ipv6. |
vrf |
Show EIGRP information per-VRF. |
vrf-name |
Name of the VRF. The type is string. |
all |
Show EIGRP information for all VRF. |
show [path]
show |
Show Command. |
path |
directory of the mo. The type is string. |
show aaa {authentication | groups}
show |
Show Information. |
aaa |
Authentication, Authorization and Accounting Information. |
authentication |
Authentication. |
groups |
Groups. |
show aaa user default-role
show |
Show Information. |
aaa |
Authentication, Authorization and Accounting configuration mode. |
user |
User. |
default-role |
Default role assigned by aaa-admin for remote authentication. |
show { ip | ipv6 } adjacency [ { interface | ip-addr } ] [ detail | summary | non-best ] vrf { vrf-name | all }
show |
Show running system information. |
ip |
Display IP information. |
ipv6 |
Display IPv6 information. |
adjacency |
Display adjacency table. |
interface |
Display specific interface adjacencies only. The type is interface. |
summary |
Show adjacency summary. |
ip-addr |
IPV4 source address. The type is ipaddr. |
non-best |
Show both best/non-best entries. |
detail |
Show detail information of adjacency entries. |
vrf |
Display per-VRF information. |
vrf-name |
VRF name. The type is string. |
all |
Show adjacency entries for all vrfs. |
show bfd clients
show |
Show running system information. |
bfd |
BFD commands. |
clients |
Bfd client list. |
show bfd ipv4 neighbors [{module module_no}] [{interface intf_id}] [{application bfd_cli_client_names}] [{src-ip src_ip}] [{dest-ip dest_ip}] [{vrf {vrf-name | all}}] [details] [sort-by {src-ip | dest-ip | interface}]
show |
Show running system information. |
bfd |
BFD commands. |
ipv4 |
Ipv4 neighbors. |
neighbors |
Neighbors. |
module |
Module. |
module_no |
module number. The type is uinteger. to 32. The range is from 0 |
interface |
Interface. |
intf_id |
show bfd sessions based on interface id. The type is interface. The values are ethernet, loopback, vlan, tunnel. |
application |
Application. |
bfd_cli_client_names |
Application name. The type is string. |
src-ip |
Source ip. |
src_ip |
Source ip value. The type is ipaddr. |
dest-ip |
Destination ip. |
dest_ip |
Destination ip value. The type is ipaddr. |
vrf |
Display per-VRF information. |
vrf-name |
VRF name. The type is string. |
all |
Display information for all VRFs. |
details |
Details. |
sort-by |
Sort by. |
show bfd ipv6 neighbors [{module module_no}] [{interface intf_id}] [{application bfd_cli_client_names}] [{src-ip src_ipv6}] [{dest-ip dest_ipv6}] [{vrf {vrf-name | all}}] [details] [sort-by {src-ip | dest-ip | interface}]
show |
Show running system information. |
bfd |
BFD commands. |
ipv6 |
Ipv6 neighbors. |
neighbors |
Neighbors. |
module |
Module. |
module_no |
module number. The type is uinteger. to 32. The range is from 0 |
interface |
Interface. |
intf_id |
show bfd sessions based on interface id. The type is interface. The values are ethernet, loopback, vlan, tunnel. |
application |
Application. |
bfd_cli_client_names |
Application name. The type is string. |
src-ip |
Source ip. |
src_ipv6 |
Source ipv6 value. The type is ipv6. |
dest-ip |
Destination ip. |
dest_ipv6 |
Destination ipv6 value. The type is ipv6. |
vrf |
Display per-VRF information. |
vrf-name |
VRF name. The type is string. |
all |
Display information for all VRFs. |
details |
Details. |
sort-by |
Sort by. |
show bfd neighbors [{module module_no}] [{interface intf_id}] [{application bfd_cli_client_names}] [{src-ip src_ip}] [{dest-ip dest_ip}] [{vrf {vrf-name | all}}] [details] [sort-by {src-ip | dest-ip | interface}]
show |
Show running system information. |
bfd |
BFD commands. |
neighbors |
Neighbors. |
module |
Module. |
module_no |
module number. The type is uinteger. to 32. The range is from 0 |
interface |
Interface. |
intf_id |
show bfd sessions based on interface id. The type is interface. The values are ethernet, loopback, vlan, tunnel. |
application |
Application. |
bfd_cli_client_names |
Application name. The type is string. |
src-ip |
Source ip. |
src_ip |
Source ip value. The type is ipaddr. |
src_ipv6 |
Source ipv6 value. The type is ipv6. |
dest-ip |
Destination ip. |
dest_ip |
Destination ip value. The type is ipaddr. |
dest_ipv6 |
Destination ipv6 value. The type is ipv6. |
vrf |
Display per-VRF information. |
vrf-name |
VRF name. The type is string. |
all |
Display information for all VRFs. |
details |
Details. |
sort-by |
Sort by. |
show bgp convergence [detail] [{vrf {vrf-name | ALL_VRFS_012345678901234}}]
show |
Show running system information. |
bgp |
Display BGP status and configuration. |
convergence |
Display BGP status and configuration. |
detail |
Display detailed information about convergence. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
ALL_VRFS_012345678901234 |
all. |
show bgp { { { ipv4 | ipv6 | vpnv4 | vpnv6 } unicast } | { l2vpn evpn } | all } neighbors [neighbor-id | neighbor-prefix-id | ipv6-neighbor-id | ipv6-neighbor-prefix-id] vrf { vrf-name | ALL_VRFS_012345678901234 }
show |
Show running system information. |
bgp |
Show BGP information. |
ipv4 |
Display BGP information for IPv4 address family. |
ipv6 |
Display BGP information for IPv6 address family. |
vpnv4 |
Display BGP information for VPNv4 address family. |
vpnv6 |
Display BGP information for VPNv6 address family. |
unicast |
Display BGP information for IPv4 unicast address family. |
l2vpn |
Display BGP information for L2VPN EVPN address family. |
evpn |
Display BGP information for L2VPN EVPN address family. |
all |
Display BGP information for all address families. |
neighbors |
Display BGP neighbor information. |
neighbor-id |
The type is ipaddr. IPv4 neighbor address. |
neighbor-prefix-id |
The type is ipprefix. IPv4 prefix neighbor address. |
ipv6-neighbor-id |
The type is ipv6. IPv6 neighbor address. |
ipv6-neighbor-prefix-id |
The type is ipv6_prefix. IPv6 prefix neighbor address. |
vrf |
Show BGP information for a VRF. |
ALL_VRFS_012345678901234 |
all. |
vrf-name |
Name of the VRF. The type is string. |
show bgp [{vrf {vrf-name | ALL_VRFS_012345678901234}}] process [detail] [{vrf {vrf-name | ALL_VRFS_012345678901234}}]
show |
Show running system information. |
bgp |
Display BGP status and configuration. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
ALL_VRFS_012345678901234 |
all. |
process |
BGP global information. |
detail |
Detailed information. |
show bgp sessions vrf { all | vrf-name }
show |
Show running system information. |
bgp |
Show BGP information. |
sessions |
Show BGP sessions. |
vrf |
Show BGP sessions in a VRF. |
all |
Show BGP sessions for all VRFs. |
vrf-name |
Name of the VRF. The type is string. |
show bgp { { { ipv4 | ipv6 | vpnv4 | vpnv6 } unicast } | { l2vpn evpn } | all } summary vrf { vrf-name | ALL_VRFS_012345678901234 }
show |
Show running system information. |
bgp |
Show BGP information. |
ipv4 |
Display BGP information for IPv4 address family. |
ipv6 |
Display BGP information for IPv6 address family. |
vpnv4 |
Display BGP information for VPNv4 address family. |
vpnv6 |
Display BGP information for VPNv6 address family. |
unicast |
Display BGP information for IPv4 unicast address family. |
l2vpn |
Display BGP information for L2VPN EVPN address family. |
evpn |
Display BGP information for L2VPN EVPN address family. |
all |
Display BGP information for all address families. |
summary |
Display summarized information of BGP state. |
vrf |
Show BGP information for a VRF. |
ALL_VRFS_012345678901234 |
all. |
vrf-name |
Name of the VRF. The type is string. |
show bgp { { { ipv4 | vpnv4 } unicast [ip-prefix]} | { { ipv6 | vpnv6 } unicast [ipv6-prefix]} | { l2vpn evpn [ipv4-rt | ipv6-rt | mac-address | {route-type rtype} | {smad [{source src-v4-addr | src-v6-addr }] [{group grp-v4-addr | grp-v6-addr } ] [ {originator orig-v4-addr | orig-v6-addr }] } ] } } vrf {vrf-name | ALL_VRFS_012345678901234}
show |
Show running system information. |
bgp |
Display BGP status and configuration. |
ipv4 |
Display BGP information for IPv4 address family. |
ipv6 |
Display BGP information for IPv6 address family. |
vpnv4 |
Display BGP information for VPNv4 address family. |
vpnv6 |
Display BGP information for VPNv6 address family. |
unicast |
Display unicast SAFI information. |
l2vpn |
Display BGP information for L2VPN EVPN address family. |
evpn |
Display BGP information for L2VPN EVPN address family. |
ip-prefix |
The type is ipprefix. IP address. |
ipv6-prefix |
The type is ipv6_prefix. IPv6 prefix. |
ipv4-rt |
The type is ipaddr. IP address. |
ipv6-rt |
The type is ipv6. IPv6 address. |
mac-address |
The type is ethernet. MAC address. |
route-type |
EVPN route type number. |
rtype |
The type is uinteger. EVPN route type number. The range is from 1 to 6. |
smad |
EVPN SMAD routes. |
source |
EVPN SMAD route source. |
src-v4-addr |
The type is ipaddr. IP address. |
src-v6-addr |
The type is ipv6. IPv6 address. |
group |
EVPN SMAD route group. |
grp-v4-addr |
The type is ipaddr. IP address. |
grp-v6-addr |
The type is ipv6. IPv6 address. |
originator |
EVPN SMAD route originator. |
orig-v4-addr |
The type is ipaddr. IP address. |
orig-v6-addr |
The type is ipv6. IPv6 address. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
ALL_VRFS_012345678901234 |
all. |
show cdp all
show |
Show running system information. |
cdp |
Show Cisco Discovery Protocol information. |
all |
Show all interfaces in CDP database. |
show cdp entry { all | { name dev-id } }
show |
Show running system information. |
cdp |
Show Cisco Discovery Protocol information. |
entry |
Show CDP entries in database. |
all |
Show all CDP entries in database. |
name |
Show a specific CDP entry matching a name. |
dev-id |
Device ID (Max Size 256). The type is string. |
show cdp global
show |
Show running system information. |
cdp |
Show Cisco Discovery Protocol information. |
global |
Show CDP global parameters. |
show cdp interface arg0
show |
Show running system information. |
cdp |
Show Cisco Discovery Protocol information. |
interface |
Show CDP parameters for an interface. |
arg0 |
Interface. The type is interface. The values are ethernet, mgmt. |
show cdp neighbors [ { interface arg0 } ] [ detail ]
show |
Show running system information. |
cdp |
Show Cisco Discovery Protocol information. |
neighbors |
Show CDP neighbors. |
interface |
Show CDP neighbors on an interface. |
arg0 |
Interface. The type is interface. The values are ethernet, mgmt. |
detail |
Show CDP neighbors detailed. |
show cdp traffic interface arg0
show |
Show running system information. |
cdp |
Show Cisco Discovery Protocol information. |
traffic |
Show cdp traffic statistics. |
interface |
Show cdp traffic statistics on an interface. |
arg0 |
Interface. The type is interface. The values are ethernet, mgmt. |
show clock
show |
Show running system information. |
clock |
Display current Date. |
show copp policy
show |
Show running system information. |
copp |
Control Plane Policing (CoPP) information. |
policy |
CoPP policies. |
show copp policy stats
show |
Show running system information. |
copp |
Control Plane Policing (CoPP) information. |
policy |
CoPP policies. |
stats |
CoPP policies packet statistics. |
show copyright
show |
Show running system information. |
copyright |
Copyright information. |
show cores [history]
show |
Show information. |
cores |
Show all core dumps for the current vdc. |
history |
Show core dumps history. |
show dcimgr mem-stats
show |
Show running system information. |
dcimgr |
Show dci-Mgr information. |
mem-stats |
Show dcimgr memstats. |
show dcimgr repo eteps
show |
Show running system information. |
dcimgr |
Display DCI Mgr information. |
repo |
Display Object Store info. |
eteps |
Display Remote site Tunnels endpoints. |
show dcimgr repo sclass-maps { [detail | verbose] }
show |
Show running system information. |
dcimgr |
Display DCI Mgr information. |
repo |
Display Object Store info. |
sclass-maps |
Display Sclass map translations. |
detail |
Display detailed information. |
verbose |
Verbose Display. |
show dcimgr repo vnid-maps { [detail | verbose] }
show |
Show running system information. |
dcimgr |
Display DCI Mgr information. |
repo |
Display Object Store info. |
vnid-maps |
Display Vnid map translations. |
detail |
Display detailed information. |
verbose |
Verbose Display. |
show diagnostic content module { all | module_id }
show |
Show information. |
diagnostic |
Diagnostic commands. |
content |
Show diagnostic test content. |
module |
Module Keyword. |
all |
Select all module ID. |
module_id |
Module ID. The type is string. |
show diagnostic result module { all | { module_id [ { test test_id } ] } } [detail]
show |
Show information. |
diagnostic |
Diagnostic commands. |
result |
Show diagnostic test result. |
module |
Module Keyword. |
all |
Select all module ID. |
test |
Diagnostic test selection. |
detail |
Detailed result. |
module_id |
Module ID. The type is string. |
test_id |
Test ID. The type is string. |
show diagnostic status module module_id
show |
Show information. |
diagnostic |
Diagnostic commands. |
status |
Show test status(running/enqueued). |
module |
<1-30> Module number. |
module_id |
Module ID. The type is string. |
show dot1x [ all | { interface if-name } ]
show |
Show running system information. |
dot1x |
Show Dot1x information. |
all |
Show Dot1x information for all Interfaces. |
interface |
Show Dot1x information for specific interface. |
if-name |
Interface. The type is interface. The values are ethernet. |
show dpp policy
show |
Show running system information. |
dpp |
Data Plane Policing (DPP) information. |
policy |
DPP policies. |
show { ip | ipv6 } eigrp interfaces [brief] { arg0 | { vrf { all | vrf-name } } }
show |
Show running system information. |
ip |
Display EIGRP information for IPv4 address family. |
ipv6 |
Display EIGRP information for IPv6 address family. |
eigrp |
Show EIGRP information. |
interfaces |
Display information on EIGRP enabled interface. |
brief |
Show only Brief information. |
arg0 |
Interface. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
vrf |
Show EIGRP information per-VRF. |
all |
Show EIGRP information for all VRF. |
vrf-name |
Name of the VRF. The type is string. |
show { ip | ipv6 } eigrp traffic vrf { all | vrf-name }
show |
Show running system information. |
ip |
Display EIGRP information for IPv4 address family. |
ipv6 |
Display EIGRP information for IPv6 address family. |
eigrp |
Show EIGRP information. |
traffic |
Display EIGRP traffic Statistics. |
vrf |
Show EIGRP information for a VRF. |
all |
Show EIGRP information for all VRFs. |
vrf-name |
Name of the VRF. The type is string. |
show endpoint [ { { mac mac-addr } | { ip ip-addr | ipv6-addr} [ detail ] } | { [ { vrf vrf-name } | { vlan vlan-id } | { interface interface-name } ] [ { summary | detail } ] } ]
show |
End point commands. |
endpoint |
End point. |
mac |
Mac address information. |
ip |
IPv4/IPv6 address information. |
vrf |
VRF. |
vlan |
VLAN. |
interface |
Interface. |
summary |
Endpoint summary information. |
detail |
Endpoint detailed information. |
mac-addr |
MAC Address. The type is ethernet. |
ip-addr |
IP address. The type is ipaddr. |
ipv6-addr |
IPV6 address. The type is ipv6. |
vrf-name |
VRF Name. The type is string. |
vlan-id |
VLAN ID. The type is integer. The range is from 1 to 4095. |
interface-name |
Interface name. The type is interface. |
show environment [ fan | power | temperature ]
show |
Show Information. |
environment |
Environment Information. |
fan |
Fan Information. |
power |
Power supply Information. |
temperature |
Sensor Temperature Information. |
Note |
In the command output of the |
show environment fex { fexid | all } [ { fan | power | temperature } ]
show |
Show running system information. |
environment |
System environment information. |
fex |
Show fex environment information. |
fexid |
FEX number. The type is integer. The range is from 101 to 199. |
all |
Show information for all FEX. |
fan |
Fan information. |
power |
Power capacity and power distribution information. |
temperature |
Temperature sensor information. |
show fcoe [ database ]
show |
Show running system information. |
fcoe |
Show FCOE paramaters. |
database |
Show FCOE database. |
show fex [ { fexid [detail | version | transceiver] } | detail ]
show |
Show running system information. |
fex |
Show FEX information. |
detail |
Detailed information. |
transceiver |
Show FEX. |
version |
Show the software version. |
fexid |
FEX number. The type is integer. The range is from 101 to 199. |
show fhs bt [summary | detailed] { {{all | static | local | data} [ {bd-vlan vlan-id} | {bd-vnid vnid} ] [sclass epg-sclass] [ {ipv4 ipv4-addr | {all-ip}} | {ipv6 ipv6-addr | {all-ip}} ] [mac mac-addr]} | {{arp | dhcpv4} [ {bd-vlan vlan-id} | {bd-vnid vnid} ] [sclass epg-sclass] [ {ipv4 ipv4-addr | {all-ip}} ] [mac mac-addr]} | {{nd | dhcpv6} [ {bd-vlan vlan-id} | {bd-vnid vnid} ] [sclass epg-sclass] [ {ipv6 ipv6-addr | {all-ip}} ] [mac mac-addr]} }
show |
Show running system information. |
fhs |
Show information about SISF. |
bt |
Show SISF binding table information. |
summary |
Show SISF binding table summary information. |
detailed |
detailed information. |
all |
all protocol entries. |
arp |
arp entries. |
dhcpv4 |
dhcpv4 entries. |
nd |
nd entries. |
dhcpv6 |
dhcpv6 entries. |
static |
static entries. |
local |
local entries. |
data |
data entries. |
bd-vlan |
bridge domain encap. |
bd-vnid |
bridge domain vnid. |
vlan-id |
bd vlan. The type is integer. The range is from 1 to 4095. |
vnid |
bd vnid. The type is integer. The range is from 0 to 16777215. |
sclass |
epg sclass. |
epg-sclass |
epg sclass. The type is integer. The range is from 1 to 65534. |
ipv4 |
ipv4 address family. |
ipv6 |
ipv6 address family. |
ipv4-addr |
ipv4 address. The type is ipaddr. |
ipv6-addr |
ipv6 address. The type is ipv6. |
all-ip |
all ip addresses. |
mac |
mac address. |
mac-addr |
mac address. The type is ethernet. |
show fhs counters { {arp {request|reply|all}} | {dhcpv4 {ack|decline|discover|inform|leaseactive|leasequery|leaseunassigned|leaseunknown|nack|offer|release|request|all}} | {nd {na|ns|ra|redirect|rs|all}} | {dhcpv6 {advertise|confirm|decline|informationreq|rebind|reconfigure|relayforw|relayreply|release|renew|reply|request|solicit|all}} | {all} } [ {bd-vlan vlan-id} | {bd-vnid vnid} ]
show |
Show running system information. |
fhs |
Show information about SISF. |
counters |
Show SISF counters. |
arp |
arp protocol. |
dhcpv4 |
dhcpv4 protocol. |
nd |
neighbour discovery protocol. |
dhcpv6 |
dhcpv6 protocol. |
request |
request counters. |
reply |
reply counters. |
all |
all counters. |
ack |
acknowledgment counters. |
decline |
decline counters. |
discover |
discover counters. |
inform |
inform counters. |
leaseactive |
leaseactive counters. |
leasequery |
leasequery counters. |
leaseunassigned |
leaseunassigned counters. |
leaseunknown |
leaseunknown counters. |
nack |
negative acknowledgment counters. |
offer |
offer counters. |
release |
release counters. |
na |
neighbor advert counters. |
ns |
neighbor solicit counters. |
ra |
router advert counters. |
redirect |
redirect counters. |
rs |
router solicit counters. |
advertise |
advertise counters. |
confirm |
confirm counters. |
informationreq |
information request counters. |
rebind |
rebind counters. |
reconfigure |
reconfigure counters. |
relayforw |
relay forward counters. |
relayreply |
relay reply counters. |
renew |
renew counters. |
solicit |
solicit counters. |
bd-vlan |
bridge domain encap. |
bd-vnid |
bridge domain vnid. |
vlan-id |
bd vlan. The type is integer. The range is from 1 to 4095. |
vnid |
bd vnid. The type is integer. The range is from 0 to 16777215. |
show fhs features { {all} | {ipinspect-v4} | {ipinspect-v6} | {raguard} | {srcguard} } [ {bd-vlan vlan-id} | {bd-vnid vnid} ]
show |
Show running system information. |
fhs |
Show information about SISF. |
features |
Show SISF feature. |
all |
all features. |
ipinspect-v4 |
ipv4inpsect. |
ipinspect-v6 |
ipv6inpsect. |
raguard |
routerguard. |
srcguard |
sourceguard. |
bd-vlan |
bridge domain encap. |
bd-vnid |
bridge domain vnid. |
vlan-id |
bd vlan. The type is integer. The range is from 1 to 4095. |
vnid |
bd vnid. The type is integer. The range is from 0 to 16777215. |
show flow cache [ipv4 | ipv6 | ce]
show |
Show running system information. |
flow |
Show NetFlow information. |
cache |
Show NetFlow Exporter Cache. |
ipv4 |
Show ipv4 cache entries. |
ipv6 |
Show ipv6 cache entries. |
ce |
Show ce cache entries. |
show flow exporter
show |
Show running system information. |
flow |
Show NetFlow information. |
exporter |
Show NetFlow Exporter Configuration and Statistics. |
show flow hw-profile
show |
Show running system information. |
flow |
Show information about netflow. |
hw-profile |
Hardware Profile. |
show flow interface
show |
Show running system information. |
flow |
Show NetFlow information. |
interface |
Flow interface information. |
show flow monitor
show |
Show running system information. |
flow |
Show NetFlow information. |
monitor |
Show Monitor Configuration. |
show flow record
show |
Show running system information. |
flow |
Show NetFlow information. |
record |
Show Record Configuration. |
show flow timers
show |
Show running system information. |
flow |
Show NetFlow information. |
timers |
Show Timer Values. |
show flow vlan
show |
Show running system information. |
flow |
Show NetFlow information. |
vlan |
Flow vlan information. |
show hardware
show |
Show running system information. |
hardware |
Show hardware information. |
show hostname
show |
Show running system information. |
hostname |
Hostname. |
show hsrp bfd-sessions [interface interface-id [to {addr_v4 | addr_v6}]] [ipv4 | ipv6]
show |
Show running system information. |
hsrp |
Hot Standby Router Protocol (HSRP) information. |
bfd-sessions |
BFD sessions. |
interface |
Interface. |
interface-id |
The type is interface. Interface. The values are ethernet, port-channel, vlan. |
to |
To IP address. |
addr_v4 |
IPv4 destination address for BFD session. The type is ipaddr. |
addr_v6 |
IPv6 destination address for BFD session. The type is ipv6. |
ipv4 |
IPv4 groups only. |
ipv6 |
IPv6 groups only. |
show hsrp delay [{interface interface-id}]
show |
Show running system information. |
hsrp |
Hot Standby Router Protocol (HSRP) information. |
interface |
Groups on this interface. |
interface-id |
The type is interface. Interface. The values are ethernet, port-channel, vlan. |
delay |
Group initialisation delay. |
show hsrp [{interface interface-id}] [{group group-number}] [{active | init | learn | listen | speak | standby }]+ [all] [{brief [all1]} | {stats}] [{ipv4 | ipv6}]
show |
Show running system information. |
hsrp |
Hot Standby Router Protocol (HSRP) information. |
interface |
Groups on this interface. |
interface-id |
The type is interface. Interface. The values are ethernet, port-channel, vlan. |
active |
Groups in active state. |
init |
Groups in init state. |
learn |
Groups in learn state. |
listen |
Groups in listen state. |
speak |
Groups in speak state. |
standby |
Groups in standby state. |
group |
Group number. |
group-number |
The type is integer. Group Number. The range is from 0 to 4095. |
all |
Include groups in disabled state. |
brief |
Brief output. |
stats |
HSRP packet stats output. |
ipv4 |
HSRP V4 Groups. |
ipv6 |
HSRP V6 Groups. |
all1 |
Brief output. |
show hsrp summary
show |
Show running system information. |
hsrp |
Hot Standby Router Protocol (HSRP) information. |
summary |
Show HSRP summary. |
show interface [ arg0 ]
show |
Show running system information. |
interface |
Interface. |
arg0 |
Interface. The type is interface_mrange. |
show interface [ arg0 ] brief
show |
Show running system information. |
interface |
Interface. |
arg0 |
Interface. The type is interface_mrange. |
brief |
Show brief info of interface. |
show interface [ arg0 ] capabilities
show |
Show running system information. |
interface |
Interface. |
arg0 |
Ethernet Interface. The type is interface_mrange. The values are ethernet. |
capabilities |
Show interface capabilities information. |
show interface arg0 counters
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet, port-channel, vlan, mgmt, vfc, vfc-port-channel. |
counters |
Show interface counters. |
show interface counters [ { fex fex-id } | { module mod-id } ]
show |
Show running system information. |
interface |
Show interface status and information. |
counters |
Show interface counters. |
fex |
Enter fex ID. |
fex-id |
Enter FEX number. The type is integer. The range is from 101 to 199. |
module |
Limit display to interfaces on module. |
mod-id |
Enter module number. The type is integer. The range is from 1 to 30. |
show interface arg0 counters brief
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet, port-channel, vfc, vfc-port-channel. |
counters |
Show interface counters. |
brief |
Show interface counters in brief. |
show interface [ arg0 ] counters detailed [ { all [ snmp ] } | snmp ]
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet, port-channel, vlan, mgmt, vfc, vfc-port-channel. |
counters |
Show interface counters. |
detailed |
Show only non-zero counters. |
all |
Show every interface counter. |
snmp |
Show SNMP MIB values. |
show interface arg0 counters errors
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet, port-channel, mgmt. |
counters |
Show interface counters. |
errors |
Show interface error counters. |
show interface counters errors [ { fex fex-id } | { module mod-id } ]
show |
Show running system information. |
interface |
Show interface status and information. |
counters |
Show interface counters. |
errors |
Show interface error counters. |
fex |
Enter fex ID. |
fex-id |
Enter FEX number. The type is integer. The range is from 101 to 199. |
module |
Limit display to interfaces on module. |
mod-id |
Enter module number. The type is integer. The range is from 1 to 30. |
show interface arg0 counters snmp
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet, port-channel, vlan, mgmt. |
counters |
Show interface counters. |
snmp |
Show SNMP MIB values. |
show interface counters snmp [ { fex fex-id } | { module mod-id } ]
show |
Show running system information. |
interface |
Show interface status and information. |
counters |
Show interface counters. |
snmp |
Show SNMP MIB values. |
fex |
Enter fex ID. |
fex-id |
Enter FEX number. The type is integer. The range is from 101 to 199. |
module |
Limit display to interfaces on module. |
mod-id |
Enter module number. The type is integer. The range is from 1 to 30. |
show interface [ arg0 ] debounce
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet. |
debounce |
Show interface debounce time information. |
show interface [ arg0 ] description
show |
Show running system information. |
interface |
Interface. |
arg0 |
Interface. The type is interface_mrange. |
description |
Show interface description. |
show interface fex-fabric
show |
Show running system information. |
interface |
Show interface status and information. |
fex-fabric |
Show all FEX fabric ports. |
show interface arg0 flowcontrol
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet, port-channel. |
flowcontrol |
Show interface flowcontrol information. |
show interface flowcontrol [ { fex fex-id } | { module mod-id } ]
show |
Show running system information. |
interface |
Show interface status and information. |
flowcontrol |
Show interface flowcontrol information. |
fex |
Limit display to interfaces on a FEX. |
fex-id |
Enter FEX number. The type is integer. The range is from 101 to 164. |
module |
Limit display to interfaces on module. |
mod-id |
Enter module number. The type is integer. The range is from 1 to 30. |
show interface [ arg0 ] mac-address
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet, port-channel, vlan, mgmt. |
mac-address |
Show interface MAC address. |
show interface [ arg0 ] priority-flow-control [ details ]
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Ethernet Interface. The type is interface_mrange. The values are ethernet. |
priority-flow-control |
Show interface PFC information. |
details |
Show interface PFC detail information. |
show interface snmp-ifindex
show |
Show running system information. |
interface |
Show interface status and information. |
snmp-ifindex |
Show snmp ifindex list. |
show interface arg0 status [ err-disabled | err-vlans ]
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet, port-channel, vlan, mgmt, loopback, tunnel. |
status |
Show interface line status. |
err-disabled |
Show interface error disabled state. |
err-vlans |
Show errored vlans. |
show interface status [ down | err-disabled | err-vlans | { fex fex-id } | inactive | { module mod-id } | up ]
show |
Show running system information. |
interface |
Show interface status and information. |
status |
Show interface line status. |
down |
Show interface down state. |
err-disabled |
Show interface error disabled state. |
err-vlans |
Show errored vlans. |
fex |
Limit display to interfaces on a FEX. |
fex-id |
Enter FEX number. The type is integer. The range is from 101 to 164. |
inactive |
Show interface inactive state. |
module |
Limit display to interfaces on module. |
mod-id |
Enter module number. The type is integer. The range is from 1 to 30. |
up |
Show interface up state. |
show interface [ arg0 ] switchport
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet, port-channel. |
switchport |
Show interface switchport information. |
show interface [ arg0 ] transceiver [ fex-fabric ] [ calibrations | details | sprom ]
show |
Show Information. |
interface |
Interface. |
arg0 |
Ethernet Interface. The type is interface_mrange. The values are ethernet. |
transceiver |
Transceiver Information. |
fex-fabric |
Show FEX interface transceiver information. |
calibrations |
Show interface transceiver calibration information. |
details |
Show interface transceiver detail information. |
sprom |
Show interface transceiver sprom information. |
show interface arg0 trunk
show |
Show running system information. |
interface |
Show interface status and information. |
arg0 |
Interface. The type is interface_mrange. The values are ethernet, port-channel. |
trunk |
Show interface trunk information. |
show interface trunk [ { vlan vlan-id } | { fex fex-id } | { module mod-id } ]
show |
Show running system information. |
interface |
Show interface status and information. |
trunk |
Show interface trunk information. |
fex |
Limit display to interfaces on a FEX. |
fex-id |
Enter FEX number. The type is integer. The range is from 101 to 164. |
module |
Limit display to interfaces on module. |
mod-id |
Enter module number. The type is integer. The range is from 1 to 30. |
vlan |
Show per vlan information for trunk. |
vlan-id |
Enter vlan range. The type is integer_mrange. The range is from 1 to 4095. |
show inventory [ chassis | fans | power_supply | {module [arg0]} ]
show |
Show running system information. |
inventory |
System inventory information. |
module |
system inventory module information. |
fans |
system inventory fan information. |
chassis |
system inventory chassis information. |
power_supply |
system inventory power supply information. |
arg0 |
please enter the module number. The type is integer. The range is from 1 to 30. |
show ip arp [ { ip-address | detail | static | interface | { summary [interface] } | { statistics [ interface ] } } ] [ { vrf { all | vrf-name } } ]
show |
Show running system information. |
ip |
Display IP information. |
arp |
Display ARP table and statistics. |
statistics |
Display ARP statistics. |
static |
Display Static ARP entries. |
summary |
Display ARP adjacency summary. |
detail |
Display detailed information. |
vrf |
Display per-VRF information. |
all |
Display all VRFs. |
interface |
Name of the Interface. The type is interface. |
ip-address |
Ip Address. The type is ipaddr. |
vrf-name |
Name of the VRF. The type is string. |
show ip bgp neighbors [ arg0 ] vrf { all | vrf-name }
show |
Show running system information. |
ip |
Display BGP information for IPv4 address family. |
bgp |
Show BGP information. |
neighbors |
Display all configured BGP neighbors. |
arg0 |
Display one particular BGP neighbor. The type is ipaddr. |
vrf |
Show BGP sessions in a VRF. |
all |
Show BGP sessions for all VRFs. |
vrf-name |
Name of the VRF. The type is string. |
show ip bgp [{ {ipv4 {unicast | multicast}} | all }] nexthop-database[{vrf {vrf-name | ALL_VRFS_012345678901234}}]
show |
Show running system information. |
ip |
Display IP information. |
bgp |
Display BGP status and configuration. |
ipv4 |
Display BGP information for IPv4 address family. |
unicast |
Display BGP information for IPv4 unicast address family. |
multicast |
Display BGP information for IPv4 multicast address family. |
all |
Display BGP information for all address families. |
nexthop-database |
Display nexthop database. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
ALL_VRFS_012345678901234 |
all. |
show ip bgp nexthop ipnexthop [{vrf {vrf-name | ALL_VRFS_012345678901234}}]
show |
Show running system information. |
ip |
Display IP information. |
bgp |
Display BGP status and configuration. |
nexthop |
Display routes matching the nexthop. |
ipnexthop |
The type is ipaddr. Nexthop address. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
ALL_VRFS_012345678901234 |
all. |
show {ip | ipv6} bgp summary vrf {vrf-name | ALL_VRFS_012345678901234}
show |
Show running system information. |
ip |
Display IP information. |
ipv6 |
Display IPv6 information. |
bgp |
Display BGP status and configuration. |
summary |
Show summary information. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
ALL_VRFS_012345678901234 |
all. |
show ip bgp {ip-addr|ip-prefix} vrf vrf-name
show |
Show running system information. |
ip |
Display IP information. |
bgp |
Display BGP status and configuration. |
ip-addr |
The type is ipaddr. IP address. |
ip-prefix |
The type is ipprefix. IP prefix. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
show ip community-list [ strarg ]
show |
Show running system information. |
ip |
Display IP information. |
community-list |
List community-list. |
strarg |
Name of prefix list (Max Size 100). The type is string. |
show ip dhcp client [ statistics [ { interface intfname } ] ]
show |
Show running system information. |
ip |
Display IP information. |
dhcp |
Show items in DHCP. |
client |
DHCP client. |
statistics |
Statistics related to DHCP. |
interface |
DHCP client address of the interface. |
intfname |
Slot/chassis number. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
show ip dhcp global statistics
show |
Show running system information. |
ip |
Display IP information. |
dhcp |
Show items in DHCP. |
global |
DHCP global stats. |
statistics |
Statistics related to DHCP. |
show ip dhcp relay [ { { statistics [ { interface intfname } ] } | { address [ { detail | { interface intfname [ detail ] } } ] } | { discover [ { interface intfname } ] } | detail } ]
show |
Show running system information. |
ip |
Display IP information. |
dhcp |
Show items in DHCP. |
relay |
DHCP Relay. |
address |
DHCP relay address. |
discover |
DHCP relay node discovery. |
statistics |
Statistics related to DHCP. |
detail |
DHCP relay detailed information. |
interface |
DHCP relay address of the interface. |
intfname |
Slot/chassis number. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
show {ip|ipv6} eigrp event vrf {vrf-name | all}
show |
Show running system information. |
ip |
Display IP information. |
ipv6 |
Display IPv6 information. |
eigrp |
Display EIGRP status and configuration. |
event |
IP-EIGRP Events. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
all |
Display information for all VRFs. |
show {ip|ipv6} eigrp [detail] vrf {vrf-name | all}
show |
Show running system information. |
ip |
Display IP information. |
ipv6 |
Display IPv6 information. |
eigrp |
Display EIGRP status and configuration. |
detail |
Display detailed information. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
all |
Display information for all VRFs. |
show ip extcommunity-list [ strarg ]
show |
Show running system information. |
ip |
Display IP information. |
extcommunity-list |
List extcommunity-list. |
strarg |
Name of prefix list (Max Size 100). The type is string. |
show ip igmp gipo joins
show |
Show running system information. |
ip |
Display IP information. |
igmp |
Display IGMP status and configuration. |
gipo |
Show IGMP gipo information. |
joins |
Show IGMP gipo Join Summary. |
show ip igmp interface [intf] [brief] [vrf {vrf-name | all}]
show |
Show running system information. |
ip |
Show IP information. |
igmp |
IGMP protocol events. |
interface |
IGMP Interface. |
intf |
Display neighbors on single interface name. The type is interface. The values are brief, ethernet, loopback, port-channel, tunnel, vlan, vrf. |
brief |
Display properties on single IGMP interface in brief. |
vrf |
Display per-VRF information. |
vrf-name |
VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip igmp snooping [ { vlan vlan } ] [ extended ]
show |
Show running system information. |
ip |
Show IP information. |
igmp |
Show IGMP information. |
snooping |
IGMP Snooping information. |
vlan |
Display Vlan IGMP snooping membership information. |
extended |
Display Extended Vlan IGMP snooping membership information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ip igmp snooping explicit-tracking [ { vlan vlan } ] [ encap ] [ extended ]
show |
Show running system information. |
ip |
Show IP information. |
igmp |
Show IGMP information. |
snooping |
IGMP Snooping information. |
explicit-tracking |
Display explicit-tracking database for IGMPv3. |
vlan |
Display Vlan explicit-tracking database. |
encap |
Display Encap Vlan explicit-tracking database. |
extended |
Display Extended Vlan explicit-tracking database. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ip igmp snooping groups [ group | source ]+ [ { vlan vlan } ] [ encap ] [ extended ] [ detail | summary ]+
show |
Show running system information. |
ip |
Show IP information. |
igmp |
Show IGMP information. |
snooping |
Show IGMP Snooping information. |
groups |
Display snooping information for group address. |
group |
Multicast IP address of single group to display. The type is ipaddr. |
source |
Source IP address. The type is ipaddr. |
detail |
Display detailed information for the group. |
summary |
Display snooping group summary. |
vlan |
Display Vlan IGMP snooping membership information. |
encap |
Display Encap Vlan IGMP snooping membership information. |
extended |
Display Extended Vlan IGMP snooping membership information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ip igmp snooping lookup-mode [ { vlan vlan } ] [ extended ]
show |
Show running system information. |
ip |
Show IP information. |
igmp |
Show IGMP information. |
snooping |
IGMP Snooping information. |
lookup-mode |
IGMP Snooping lkup mode information. |
vlan |
Display Vlan information. |
extended |
Display Extended Vlan IGMP snooping lkup mode information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ip igmp snooping mrouter [ { vlan vlan } ] [ encap ] [ extended ] [ detail ]
show |
Show running system information. |
ip |
Show IP information. |
igmp |
Show IGMP information. |
snooping |
IGMP Snooping information. |
mrouter |
Display multicast routers detected. |
detail |
Display detailed mrouter information. |
vlan |
Display Vlan multicast router information. |
encap |
Display Encap Vlan IGMP snooping mrouter information. |
extended |
Display Extended Vlan IGMP snooping mrouter information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ip igmp snooping querier [ { vlan vlan } ] [ extended ] [ detail ]
show |
Show running system information. |
ip |
Show IP information. |
igmp |
Show IGMP information. |
snooping |
IGMP Snooping information. |
querier |
Display snooping querier information. |
detail |
Display detailed information. |
vlan |
Display Vlan IGMP snooping querier information. |
extended |
Display Extended Vlan IGMP snooping Querier information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ip igmp snooping statistics [ { vlan vlan } ] [ extended ] [ global ]
show |
Show running system information. |
ip |
Show IP information. |
igmp |
Show IGMP information. |
snooping |
IGMP Snooping information. |
statistics |
Display packet/error counter statistics. |
global |
Display global statistics. |
vlan |
Display vlan statistics. |
extended |
Display Extended Vlan IGMP snooping statistics information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ip igmp vrf all
show |
Show running system information. |
ip |
Display IP information. |
igmp |
Display IGMP status and configuration. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
show ip interface [ {brief [include-secondary]} | interface | ip-addr ] [ operational ] [ { vrf { all | vrf-name } } ]
show |
Show running system information. |
ip |
Display IP information. |
interface |
Display IP related interface information. |
brief |
Show brief info of interface. |
include-secondary |
Display summary of all IP addresses. |
operational |
Display only interfaces that are administratively enabled. |
vrf |
Display per-VRF information. |
all |
Display all VRFs. |
interface |
Name of the Interface. The type is interface. The values are ethernet, port-channel, vlan, mgmt, loopback, tunnel. |
ip-addr |
Ip Address. The type is ipaddr. |
vrf-name |
Name of the VRF. The type is string. |
local-addr |
Display interface for local IP address. The type is string. |
show ip mroute [[detail] | {summary [count | software-forwarded | rpf-failed]} | { [{{group [source] [shared-tree | source-tree] }}] {[flags] | [detail] | [summary [software-forwarded | rpf-failed]]}}] [vrf {vrf-name | all}]
show |
Show running system information. |
ip |
Show IP information. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
mroute |
Display IP multicast routing table. |
summary |
Display route counts and packet rates. |
shared-tree |
Display route for *,G entries. |
source-tree |
Display route for S,G entries. |
software-forwarded |
Display software switched route counts only. |
rpf-failed |
Display RPF failure statistics. |
source |
Source IP address. The type is ipaddr. |
group |
Multicast IP address of single group to display. The type is ipaddr. |
vrf-name |
The type is string. VRF name. |
count |
Display route counts only. |
detail |
Display detailed route attributes. |
flags |
Display detailed route attributes. |
show ip msdp count [as-number] [vrf {vrf-name | all }]
show |
Show running system information. |
ip |
Show IP information. |
msdp |
Display MSDP status and configuration. |
count |
Display SA cache counters. |
as-number |
AS number. The type is asn. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip msdp mesh-group [mesh-name] [vrf {vrf-name | all }]
show |
Show running system information. |
ip |
Show IP information. |
msdp |
Display MSDP status and configuration. |
mesh-group |
Display members of mesh-group. |
mesh-name |
Display single mesh-group. The type is string. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip msdp {sa-cache | route} [ group | source ]+ [asn] [{peer ipaddr}] [detail] [vrf {vrf-name | all }]
show |
Show running system information. |
ip |
Show IP information. |
msdp |
Display MSDP status and configuration. |
sa-cache |
Display MSDP SA route cache. |
route |
Display MSDP SA route cache. |
source |
Display group/source address for SA. The type is ipaddr. |
group |
Display group/source address for SA. The type is ipaddr. |
asn |
AS number. The type is asn. |
peer |
Display MSDP SA received from single peer. |
ipaddr |
IP address of peer for SA. The type is ipaddr. |
detail |
Display detailed information. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip msdp peer [ipaddr] [vrf {vrf-name | all }]
show |
Show running system information. |
ip |
Show IP information. |
msdp |
Display MSDP status and configuration. |
peer |
Display MSDP peer information. |
ipaddr |
IP address of MSDP peer. The type is ipaddr. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip msdp policy statistics sa-policy ipaddr {in | out} [vrf {vrf-name | all }]
show |
Show running system information. |
ip |
Show IP information. |
msdp |
Display MSDP status and configuration. |
policy |
Policy information. |
statistics |
Policy statistics. |
sa-policy |
Configureed SA policy for MSDP peer. |
ipaddr |
IP address of MSDP peer for SA policy. The type is ipaddr. |
in |
Input policy. |
out |
Output policy. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip msdp rpf [rpaddr] [vrf {vrf-name | all }]
show |
Show running system information. |
ip |
Show IP information. |
msdp |
Display MSDP status and configuration. |
rpf |
Display RPF-peer for RP address. |
rpaddr |
IP address of RP. The type is ipaddr. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip msdp sources [vrf {vrf-name | all }]
show |
Show running system information. |
ip |
Show IP information. |
msdp |
Display MSDP status and configuration. |
sources |
Display learned sources with their group counts and limits. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip msdp summary [vrf {vrf-name | all }]
show |
Show running system information. |
ip |
Show IP information. |
msdp |
Display MSDP status and configuration. |
summary |
Display MSDP peer summary. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip ospf [ptag] database [[[network | asbr-summary | summary | router | opaque-link | opaque-area | nssa-external] [{area area-id-ip}]] | {external [{ext_tag tag_val}]} | opaque-as] [lsid] [self-originated | {adv-router advid} | {adv-router-name adv-name} ] [vrf {vrf-name | all}]
show |
Show running system information. |
ip |
Display IP information. |
ospf |
Display OSPF status and configuration. |
ptag |
Process tag, when multiple OSPF instances exist. |
database |
Link-state Database Summary. |
network |
Display network LSAs. |
asbr-summary |
Display type 4 (asbr-summary) LSAs. |
summary |
Display type 3 (network-summary) LSAs. |
router |
Display router LSAs. |
opaque-link |
Display Opaque Link-Local LSAs. |
opaque-area |
Display Opaque Area LSAs. |
nssa-external |
Display type 7 (NSSA external) LSAs. |
area |
Display only LSA's in this area. |
area-id-ip |
The type is ipaddr. Area Id as an integer or ip address. |
external |
Display type 5 (external) LSAs. |
ext_tag |
Restrict display by tag. |
tag_val |
The type is uinteger. 32-bit tag value. |
opaque-as |
Display Opaque AS LSAs. |
lsid |
The type is ipaddr. Restrict display by link state ID. |
self-originated |
Display only self-originated LSAs. |
adv-router |
Restrict display by Advertising router. |
advid |
The type is ipaddr. Advertising router ID. |
adv-router-name |
Restrict display by Advertising router name. |
adv-name |
The type is string. DNS Name of the Advertising router. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name. |
all |
Display information for all VRFs. |
In NX-OS releases that support multiple OSPF instances, a command such as show ip ospf database
displays output only from the first registered OSPF process. To display output from other OSPF processes, you must include
a process tag in the command: show ip ospf <ptag> database
. You can view the running processes and obtain the process tag using a VSH command, as in the following example:
(none)# vsh -c "show cli internal ctags" | grep -i ospf
4276 281 119 ospf multipodIn 2450 ready ospf-multipodInternal
4278 281 119 ospf default 2455 ready ospf-default
4277 282 128 ospfv3 default 2478 ready ospfv3-default
To display the output of the OSPF default process in this example, use the command show ip ospf default database
.
show ip ospf database [[[network | asbr-summary | summary | router | opaque-link | opaque-area | nssa-external] [{area area-id-ip}]] | {external [{ext_tag tag_val}]} | opaque-as] [lsid] [self-originated | {adv-router advid} | {adv-router-name adv-name} ] detail [vrf {vrf-name | all}]
show |
Show running system information. |
ip |
Display IP information. |
ospf |
Display OSPF status and configuration. |
database |
Link-state Database Summary. |
network |
Display network LSAs. |
asbr-summary |
Display type 4 (asbr-summary) LSAs. |
summary |
Display type 3 (network-summary) LSAs. |
router |
Display router LSAs. |
opaque-link |
Display Opaque Link-Local LSAs. |
opaque-area |
Display Opaque Area LSAs. |
nssa-external |
Display type 7 (NSSA external) LSAs. |
area |
Display only LSA's in this area. |
area-id-ip |
The type is ipaddr. Area Id as an integer or ip address. |
external |
Display type 5 (external) LSAs. |
ext_tag |
Restrict display by tag. |
tag_val |
The type is uinteger. 32-bit tag value. |
opaque-as |
Display Opaque AS LSAs. |
lsid |
The type is ipaddr. Restrict display by link state ID. |
self-originated |
Display only self-originated LSAs. |
adv-router |
Restrict display by Advertising router. |
advid |
The type is ipaddr. Advertising router ID. |
adv-router-name |
Restrict display by Advertising router name. |
adv-name |
The type is string. DNS Name of the Advertising router. |
detail |
Display LSA in detail. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name. |
all |
Display information for all VRFs. |
show ip ospf interface { arg0 | { [ brief ] vrf { all | vrf-name } } }
show |
Show running system information. |
ip |
Ipv4. |
ospf |
Display OSPF status and configuration. |
interface |
OSPF enabled interface. |
arg0 |
Interface. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
brief |
Display summary of OSPF interfaces. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show ip ospf neighbors { arg0 [ { ip [ detail ] } | detail | summary ] [vrf { all | vrf-name } ] } | { [ { ip [ detail ] } | detail | summary ] vrf { all | vrf-name } }
show |
Show running system information. |
ip |
Ipv4. |
ospf |
Display OSPF status and configuration. |
neighbors |
Neighbor list. |
ip |
Router ID of neighbor. The type is ipaddr. |
detail |
Show detailed neighbor display. |
arg0 |
Interface. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
summary |
Summary of neighbors. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show ip ospf route [ summary | { ippfx [ longer-prefixes ] [ summary ] } | ip ] vrf { all | vrf-name }
show |
Show running system information. |
ip |
Ipv4. |
ospf |
Display OSPF status and configuration. |
route |
Internal OSPF routes. |
ip |
Show single OSPF route. The type is ipaddr. |
ippfx |
Show single exact match OSPF route. The type is ipprefix. |
summary |
Show route counts. |
longer-prefixes |
Show exact match and more specific routes. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show ip ospf summary-address vrf { all | vrf-name }
show |
Show running system information. |
ip |
Ipv4. |
ospf |
Display OSPF status and configuration. |
summary-address |
Summary-address redistribution information. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show ip ospf traffic { arg0 | { vrf { all | vrf-name } } }
show |
Show running system information. |
ip |
Ipv4. |
ospf |
Display OSPF status and configuration. |
traffic |
Packet counters. |
arg0 |
Interface. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show ip ospf vrf { all | vrf-name }
show |
Show running system information. |
ip |
Ipv4. |
ospf |
Display OSPF status and configuration. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show ip pim group-range [group] [vrf {vrf-name | all}]
show |
Show running system information. |
ip |
Show IP information. |
pim |
Display PIM status and configuration. |
group-range |
Display the various group-ranges. |
group |
IP address of the group to display. The type is ipaddr. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip pim interface [intf] [brief] [vrf {vrf-name | all}]
show |
Show running system information. |
ip |
Show IP information. |
pim |
Display PIM status and configuration. |
interface |
Display PIM interface related information. |
intf |
Display properties on single PIM interface. The type is interface. The values are brief, ethernet, loopback, port-channel, tunnel, vlan, vrf. |
brief |
Display one line status per PIM interface. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip pim neighbor {[interface] | [ipaddr]} [vrf {vrf-name | all}]
show |
Show running system information. |
ip |
Show IP information. |
pim |
Display PIM status and configuration. |
neighbor |
Display PIM neighbor related information. |
interface |
Display neighbors on single interface name. The type is interface. The values are ethernet, loopback, port-channel, tunnel, vlan, vrf. |
ipaddr |
IP address of single neighbor to display. The type is ipaddr. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip pim oif-list group [source] [vrf {vrf-name | all}]
show |
Show running system information. |
ip |
Show IP information. |
pim |
Display PIM status and configuration. |
oif-list |
Display interfaces for oif-list of PIM route. |
group |
Group address to display. The type is ipaddr. |
source |
Source address to display. The type is ipaddr. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip pim route [{group [source]}] [vrf {vrf-name | all }]
show |
Show running system information. |
ip |
Show IP information. |
pim |
Display PIM status and configuration. |
route |
Display PIM route cache. |
group |
Multicast IP address of single group to display. The type is ipaddr. |
source |
Source IP address. The type is ipaddr. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip pim rp [group] [vrf {vrf-name | all}]
show |
Show running system information. |
ip |
Show IP information. |
pim |
Display PIM status and configuration. |
rp |
Display PIM RP, Auto-RP, and BSR related information. |
group |
Display RP for group address. The type is ipaddr. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip pim statistics [vrf {vrf-name | all}]
show |
Show running system information. |
ip |
Show IP information. |
pim |
Display PIM status and configuration. |
statistics |
Display PIM Statistics per-VRF. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name (Max Size 32). |
all |
Display information for all VRFs. |
show ip prefix-list [ strarg ]
show |
Show running system information. |
ip |
Display IP information. |
prefix-list |
List IP prefix lists. |
strarg |
Name of prefix list (Max Size 100). The type is string. |
show ip process [ { vrf { all | vrf-name } } ]
show |
Show running system information. |
ip |
Display IP information. |
process |
Display IP global information. |
vrf |
Display per-VRF information. |
all |
Display all VRFs. |
vrf-name |
Name of the VRF. The type is string. |
show ip route { { [ ip-addr | { ip-prefix [{longer-prefixes|shorter-prefixes}] } ] [ bgp | eigrp | ospf ] [ { next-hop nh } | { interface intf } | { updated { [ { since stime } ] [ { until utime } ] } } ]+ [ summary | detail ] vrf {vrf-name | all} } | { vrf {vrf-name | all} [ ip-addr | { ip-prefix [{longer-prefixes|shorter-prefixes}] } ] [ { next-hop nh } | { interface intf } | { updated { [ { since stime } ] [ { until utime } ] } } ]+ [ summary | detail ] } }
show |
Show running system information. |
ip |
Display IP information. |
route |
Display routing information. |
ip-addr |
Display single route longest match lookup. The type is ipaddr. |
ip-prefix |
Display single exact match route. The type is ipprefix. |
longer-prefixes |
Display matching routes with mask-lengths >= prefix. |
shorter-prefixes |
Display matching routes with mask-lengths <= prefix. |
next-hop |
Display routes with this next-hop only. |
nh |
Next hop address. The type is ipaddr. |
interface |
Display routes with this output interface only. |
intf |
Interface Name. The type is interface. |
updated |
Display routes filtered by last updated time. |
since |
Display those routes updated since this time. |
stime |
Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string. |
until |
Display those routes updated until this time. |
utime |
Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string. |
summary |
Display route counts. |
detail |
Display routes in full detail. |
vrf |
Display per-VRF information. |
vrf-name |
VRF name. The type is string. |
bgp | |
ospf | |
eigrp | |
all |
Display information for all VRFs. |
show ip static-route [ { vrf { all | vrf-name } } ]
show |
Show running system information. |
ip |
Display IP information. |
static-route |
Display configured static routes. |
vrf |
Display per-VRF information. |
all |
Display all VRFs. |
vrf-name |
Name of the VRF. The type is string. |
show ipsec sa [detail]
show |
Show running system information. |
ipsec |
Show ipsec retaed information. |
sa |
Ipsec Security Associations. |
detail |
Ipsec Security Associations detailed information. |
show ipv6 bgp neighbors [ arg0 ] vrf { all | vrf-name }
show |
Show running system information. |
ipv6 |
Display BGP information for IPv6 address family. |
bgp |
Show BGP information. |
neighbors |
Display all configured BGP neighbors. |
arg0 |
Display one particular BGP neighbor. The type is ipv6. |
vrf |
Show BGP sessions in a VRF. |
all |
Show BGP sessions for all VRFs. |
vrf-name |
Name of the VRF. The type is string. |
show ipv6 bgp nexthop-database [{vrf {vrf-name | ALL_VRFS_012345678901234}}]
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
bgp |
Display BGP status and configuration. |
nexthop-database |
Display nexthop database. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
ALL_VRFS_012345678901234 |
all. |
show ipv6 bgp nexthop ipv6nexthop [{vrf {vrf-name | ALL_VRFS_012345678901234}}]
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
bgp |
Display BGP status and configuration. |
nexthop |
Display routes matching the nexthop. |
ipv6nexthop |
The type is ipv6. Nexthop address. |
vrf |
Virtual Router Context. |
vrf-name |
The type is string. VRF name. |
ALL_VRFS_012345678901234 |
all. |
show ipv6 dhcp relay [ { statistics } | { address [ { detail | { interface intfname [ detail ] } } ] } ]
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
dhcp |
Show items in DHCP. |
relay |
DHCP Relay. |
address |
DHCP relay address. |
detail |
DHCP relay detailed information. |
interface |
DHCP relay address of the interface. |
intfname |
Slot/chassis number. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
statistics |
Statistics related to DHCP. |
show ipv6 icmp adjacency [interface] [detail] [vrf {vrf-name | all}]
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
icmp |
Display ICMPv6 information. |
adjacency |
Show IPv6 dynamic learnt adjacency entry. |
detail |
Display detailed information. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
interface |
Interface name to display. The type is interface. |
vrf-name |
VRF name. The type is string. |
show ipv6 icmp interface [interface] [detail] [vrf {vrf-name | all}]
all |
Display information for all VRFs. |
show |
Show running system information. |
interface |
Show IPv6 dynamic learnt adjacency entry. |
detail |
Display detailed information. |
vrf |
Display per-VRF information. |
ipv6 |
Display IPv6 information. |
icmp |
Display ICMPv6 information. |
interface |
Interface name to display. The type is interface. |
vrf-name |
VRF name. The type is string. |
show ipv6 interface [ {brief [include-secondary]} | interface | ipv6-addr ] [ { vrf { all | vrf-name } } ]
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
interface |
Display IPv6 related interface information. |
brief |
Show brief info of interface. |
include-secondary |
Display summary of all IPv6 addresses. |
operational |
Display only interfaces that are administratively enabled. |
vrf |
Display per-VRF information. |
all |
Display all VRFs. |
interface |
Name of the Interface. The type is interface. The values are ethernet, port-channel, vlan, mgmt, loopback, vrf. |
ipv6-addr |
Ipv6 Address. The type is ipv6. |
vrf-name |
Name of the VRF. The type is string. |
local-addr |
Display interface for local IPv6 address. The type is string. |
show ipv6 mld snooping [ { vlan vlan } ]
show |
Show running system information. |
ipv6 |
Show IPv6 information. |
mld |
Show MLD information. |
snooping |
MLD Snooping information. |
vlan |
Display Vlan MLD snooping membership information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ipv6 mld snooping explicit-tracking [ { vlan vlan } ] [encap]
show |
Show running system information. |
ipv6 |
Show IPv6 information. |
mld |
Show MLD information. |
snooping |
MLD Snooping information. |
explicit-tracking |
Display explicit-tracking database for MLDv2. |
vlan |
Display Vlan explicit-tracking database. |
encap |
Display Encap Vlan explicit-tracking database. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ipv6 mld snooping groups [ { [ group ] [ source ] } [ { vlan vlan } ] ] [ detail | summary] [ encap ]
show |
Show running system information. |
ipv6 |
Show IPv6 information. |
mld |
Show MLD information. |
snooping |
Show MLD Snooping information. |
groups |
Display snooping information for group address. |
group |
Multicast IP address of single group to display. The type is ipv6. |
source |
Source IP address. The type is ipv6. |
detail |
Display detailed information for the group. |
summary |
Display snooping group summary. |
vlan |
Display Vlan MLD snooping membership information. |
encap |
Display Encap Vlan MLD snooping membership information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ipv6 mld snooping lookup-mode [ { vlan vlan } ]
show |
Show running system information. |
ipv6 |
Show IPv6 information. |
mld |
Show MLD information. |
snooping |
MLD Snooping information. |
lookup-mode |
MLD Snooping lkup mode information. |
vlan |
Display Vlan information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ipv6 mld snooping mrouter [ { vlan vlan } ] [detail] [encap]
show |
Show running system information. |
ipv6 |
Show IPv6 information. |
mld |
Show MLD information. |
snooping |
MLD Snooping information. |
mrouter |
Display multicast routers detected. |
detail |
Display detailed mrouter information. |
vlan |
Display Vlan multicast router information. |
encap |
Display Encap Vlan MLD snooping membership information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ipv6 mld snooping querier [ { vlan vlan } ] [detail]
show |
Show running system information. |
ipv6 |
Show IPv6 information. |
mld |
Show MLD information. |
snooping |
MLD Snooping information. |
querier |
Display snooping querier information. |
detail |
Display detailed information. |
vlan |
Display Vlan MLD snooping querier information. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ipv6 mld snooping statistics [global | { vlan vlan } ]
show |
Show running system information. |
ipv6 |
Show IPv6 information. |
mld |
Show MLD information. |
snooping |
MLD Snooping information. |
statistics |
Display packet/error counter statistics. |
global |
Display global statistics. |
vlan |
Display vlan statistics. |
vlan |
Specify vlan-id. The type is integer. The range is from 1 to 4095. |
show ipv6 nd interface [interface] [detail] [prefix] [vrf {vrf-name | all}]
all |
Display information for all VRFs. |
show |
Show running system information. |
interface |
Show IPv6 dynamic learnt adjacency entry. |
detail |
Display detailed information. |
prefix |
Display List of ICMPv6 RA prefix. |
vrf |
Display per-VRF information. |
ipv6 |
Display IPv6 information. |
nd |
Display NDinformation. |
interface |
Interface name to display. The type is interface. |
vrf-name |
VRF name. The type is string. |
show ipv6 prefix-list [ strarg ]
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
prefix-list |
List IPv6 prefix lists. |
strarg |
Name of prefix list (Max Size 100). The type is string. |
show ipv6 process [ { vrf { all | vrf-name } } ]
show |
Show running system information. |
ipv6 |
Display IP information. |
process |
Display IP global information. |
vrf |
Display per-VRF information. |
all |
Display all VRFs. |
vrf-name |
Name of the VRF. The type is string. |
show ipv6 route [ ipv6-addr | { ipv6-prefix [{longer-prefixes|shorter-prefixes}] } ] [ bgp | eigrp | ospf ] [ { next-hop next-hop } | { interface interface } | { updated { [since stime ] [until utime] } } ]+ [ summary | detail ] vrf {vrf-name | all}
show |
Show running system information. |
ipv6 |
Display IP information. |
route |
Display routing information. |
ipv6-addr |
Display single route longest match lookup. The type is ipv6. |
ipv6-prefix |
Display single exact match route. The type is ipv6_prefix. |
longer-prefixes |
Display matching routes with mask-lengths >= prefix. |
shorter-prefixes |
Display matching routes with mask-lengths <= prefix. |
next-hop |
Display routes with this next-hop only. |
next-hop |
Next hop address. The type is ipv6. |
interface |
Display routes with this output interface only. |
interface |
Interface Name. The type is interface. |
updated |
Display routes filtered by last updated time. |
since |
Display those routes updated since this time. |
stime |
Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string. |
until |
Display those routes updated until this time. |
utime |
Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string. |
summary |
Display route counts. |
detail |
Display routes in full detail. |
vrf |
Display per-VRF information. |
vrf-name |
VRF name. The type is string. |
bgp | |
ospf | |
eigrp | |
all |
Display information for all VRFs. |
show ipv6 static-route [ { vrf { all | vrf-name } } ]
show |
Show running system information. |
ipv6 |
Display IP information. |
static-route |
Display configured static routes. |
vrf |
Display per-VRF information. |
all |
Display all VRFs. |
vrf-name |
Name of the VRF. The type is string. |
show isis adjacency [{system-id sid}] [interface] [detail] vrf { all | vrf-name }
show |
Show running system information. |
isis |
Display IS-IS status and configuration. |
adjacency |
Display IS-IS adjacency information. |
interface |
IS-IS interface. The type is interface. The values are ethernet. |
system-id |
Hostname or System ID. |
sid |
Hostname or System ID (in the form of XXXX.XXXX.XXXX). The type is string. |
detail |
Display IS-IS detail adjacency information. |
vrf |
VRF name. |
all |
Display information for all VRFs. |
vrf-name |
Specify VRF Name. The type is string. |
show isis database [level-1|l1] [lid] vrf { all | vrf-name }
show |
Show running system information. |
isis |
Display IS-IS status and configuration. |
database |
Display IS-IS database information. |
level-1 |
Display IS-IS Level-1 routing link state database. |
l1 |
Display IS-IS Level-1 routing link state database. |
lid |
LSP ID in the form of XXXX.XXXX.XXXX.XX-XX. The type is lsp_id. |
vrf |
VRF name. |
all |
Display information for all VRFs. |
vrf-name |
Specify VRF Name. The type is string. |
show isis dteps vrf { all | vrf-name }
show |
Show running system information. |
isis |
Display IS-IS status and configuration. |
dteps |
ISIS Dynamic Tunnel EndPoint database. |
vrf |
VRF name. |
all |
Display information for all VRFs. |
vrf-name |
Specify VRF Name. The type is string. |
show isis interface [ brief | intf_arg ] [level-1] vrf { all | vrf-name }
show |
Show running system information. |
isis |
Display IS-IS status and configuration. |
interface |
Display IS-IS interface information. |
level-1 |
Display Level-1 interfaces. |
brief |
Brief display of IS-IS interfaces. |
intf_arg |
IS-IS interface. The type is interface. The values are ethernet. |
vrf |
VRF name. |
all |
Display information for all VRFs. |
vrf-name |
Specify VRF Name. The type is string. |
show isis protocol vrf { all | vrf-name }
show |
Show running system information. |
isis |
Display IS-IS status and configuration. |
protocol |
Display IS-IS process information. |
vrf |
VRF name. |
all |
Display information for all VRFs. |
vrf-name |
Specify VRF Name. The type is string. |
show isis route vrf { all | vrf-name }
show |
Show running system information. |
isis |
Display IS-IS status and configuration. |
route |
Display IS-IS route information. |
vrf |
VRF name. |
all |
Display information for all VRFs. |
vrf-name |
Specify VRF Name. The type is string. |
show isis statistics vrf { all | vrf-name }
show |
Show running system information. |
isis |
Display IS-IS status and configuration. |
statistics |
Display IS-IS protocol statistics. |
vrf |
VRF name. |
all |
Display information for all VRFs. |
vrf-name |
Specify VRF Name. The type is string. |
show isis traffic [interface] vrf { all | vrf-name }
show |
Show running system information. |
isis |
Display IS-IS status and configuration. |
traffic |
Display IS-IS traffic information. |
interface |
IS-IS interface. The type is interface. The values are ethernet. |
vrf |
VRF name. |
all |
Display information for all VRFs. |
vrf-name |
Specify VRF Name. The type is string. |
show lacp counters [ { interface arg0 } ]
show |
Show running system information. |
lacp |
LACP protocol. |
counters |
LACP counters. |
interface |
Specify a port-channel. |
arg0 |
Port Channel interface. The type is interface_mrange. The values are port-channel. |
show lacp interface arg0
show |
Show running system information. |
lacp |
LACP protocol. |
interface |
Specify an interface. |
arg0 |
Interface. The type is interface. The values are ethernet. |
show lacp neighbor [ { interface arg0 } ]
show |
Show running system information. |
lacp |
LACP protocol. |
neighbor |
LACP interface neighbor. |
interface |
Specify a port-channel. |
arg0 |
Port Channel interface. The type is interface_mrange. The values are port-channel. |
show lacp port-channel [ { interface arg0 } ]
show |
Show running system information. |
lacp |
LACP protocol. |
port-channel |
LACP port-channels. |
interface |
Specify a port-channel. |
arg0 |
Port Channel interface. The type is interface_mrange. The values are port-channel. |
show lacp system-identifier
show |
Show running system information. |
lacp |
LACP protocol. |
system-identifier |
Show system-identifier information. |
show lldp dcbx interface if0
show |
Show running system information. |
lldp |
Show information about lldp. |
dcbx |
Show dcbx information. |
interface |
show lldp interface information. |
if0 |
The type is interface. Enter interface. The values are ethernet. |
show lldp entry [ sys-name ]
show |
Show running system information. |
lldp |
Show information about lldp. |
entry |
Show lldp entry information. |
sys-name |
Peer's System name. The type is string. |
show lldp interface arg0
show |
Show running system information. |
lldp |
Show information about lldp. |
interface |
Show lldp interface information. |
arg0 |
Interface. The type is interface. The values are ethernet, mgmt. |
show lldp neighbors [ { interface arg0 } ] [ detail ]
show |
Show running system information. |
lldp |
Show information about lldp. |
neighbors |
Show lldp neighbor information. |
interface |
Show lldp neighbor information on an interface. |
arg0 |
Interface. The type is interface. The values are ethernet, mgmt. |
detail |
Show lldp neighbor detail information. |
show lldp timers
show |
Show running system information. |
lldp |
Show information about lldp. |
timers |
Show lldp timers. |
show lldp tlv-select
show |
Show running system information. |
lldp |
Show information about lldp. |
tlv-select |
Show lldp tlv-select. |
show lldp traffic [ { interface arg0 } ]
show |
Show running system information. |
lldp |
Show information about lldp. |
traffic |
Show lldp counters. |
interface |
Show lldp interface information. |
arg0 |
Interface. The type is interface. The values are ethernet, mgmt. |
show locator-led status
show |
Show running system information. |
locator-led |
Blink locator led on device. |
status |
Status. |
show logging ip access-list cache { permit | deny }
show |
Show running system information. |
logging |
Logging information. |
ip |
IP configuration. |
access-list |
Access-list. |
cache |
show entries in ACLLOG cache. |
permit |
action is permit. |
deny |
action is deny. |
show logging ip access-list drop-codes
show |
Show running system information. |
logging |
Logging information. |
ip |
IP configuration. |
access-list |
Access-list. |
drop-codes |
Drop Codes. |
show logging ip access-list span
show |
Show running system information. |
logging |
Logging information. |
ip |
IP configuration. |
access-list |
Access-list. |
span |
show entries in ACLLOG span. |
show mac address-table [ { static | dynamic } ] [ {address mac-addr} | {vlan id} | {interface interface-name} ]+
show |
Show running system information. |
mac |
Mac addr information. |
address-table |
MAC Address Table. |
static |
Display Static Entries. |
dynamic |
Display Dynamic Entries. |
address1 |
address. |
vlan1 |
VLAN. |
address |
address. |
interface |
Interface. |
vlan |
VLAN. |
mac-addr |
MAC Address. The type is ethernet. |
id |
VLAN ID. The type is integer. The range is from 1 to 4095. |
interface-name |
Interface name. The type is interface. |
show macsec mka session [ details | { interface ethernet interface } ]
show |
Show running system information. |
macsec |
Show MACSEC information. |
mka |
Show MACSEC mka information. |
session |
Show MACSEC mka session information. |
details |
Show MACSEC mka session details. |
interface |
Show MACSEC mka session information for interface. |
ethernet |
Show MACSEC mka session information for ethernet interface. |
interface |
Name of the Interface. The type is string. |
show macsec mka statistics [ interface ethernet interface ]
show |
Show running system information. |
macsec |
Show MACSEC information. |
mka |
Show MACSEC mka information. |
statistics |
Show MACSEC mka statistics information. |
interface |
Show MACSEC mka statistics information for interface. |
ethernet |
Show MACSEC mka statistics information for ethernet interface. |
interface |
Name of the Interface. The type is string. |
show macsec mka summary
show |
Show running system information. |
macsec |
Show MACSEC information. |
mka |
Show MACSEC mka information. |
summary |
Show MACSEC mka summary information. |
session |
Show MACSEC mka session information. |
details |
Show MACSEC mka session details. |
interface |
Show MACSEC mka session information for interface. |
ethernet |
Show MACSEC mka session information for ethernet interface. |
interface |
Name of the Interface. The type is string. |
show macsec secy statistics [ interface ethernet interface ]
show |
Show running system information. |
macsec |
Show MACSEC information. |
secy |
Show MACSEC secy information. |
statistics |
Show MACSEC secy statistics information. |
interface |
Show MACSEC secy statistics information for interface. |
ethernet |
Show MACSEC secy statistics information for ethernet interface. |
interface |
Name of the Interface. The type is string. |
show module [arg0]
show |
Show Information. |
module |
Module. |
arg0 |
please enter the module number. The type is integer. The range is from 1 to 30. |
show module fex {all | fexid}
show |
Show running system information. |
module |
Show module information. |
fex |
Show fex module information. |
fexid |
FEX number. The type is integer. The range is from 101 to 199. |
all |
Show information for all FEX. |
show monitor
show |
Show running system information. |
monitor |
Show SPAN information. |
show monitor session { all | session_id | { range session_range } } [ brief | extended ]
show |
Show running system information. |
monitor |
Show SPAN information. |
session |
Show session information. |
all |
All sessions. |
session_id |
Session Id 1-255. The type is integer. The range is from 1 to 255. |
range |
Specify a range. |
session_range |
session range(s): 1-4, 7, or 1-5,7-19. The type is integer_mrange. The range is from 1 to 255. |
brief |
Brief information. |
extended |
Session extended info like encaps, vlan filters per interfaces. |
show npv external-interface-usage [ { server-interface arg0 } ]
show |
Show running system information. |
npv |
Show Npv information. |
external-interface-usage |
Show external interface usage by server interfaces. |
server-interface |
Show external interface usage by a server interface. |
arg0 |
Interface. The type is interface. The values are vfc, vfc-port-channel. |
show npv flogi-table [ { vsan vsan-id } ]
show |
Show running system information. |
npv |
Show Npv information. |
flogi-table |
Show information about FLOGI sessions. |
vsan |
Show information about FLOGI sessions for a VSAN. |
vsan-id |
Vsan-id. The type is integer_range. The range is from 1 to 4093. |
show npv flogi-table interface arg0
show |
Show running system information. |
npv |
Show Npv information. |
flogi-table |
Show information about FLOGI sessions. |
interface |
Show information about FLOGI sessions for a server interface. |
arg0 |
Interface. The type is interface. The values are vfc, vfc-port-channel. |
show npv status [ { vsan vsan-id } ]
show |
Show running system information. |
npv |
Show Npv information. |
status |
Show Npv Status. |
vsan |
Show NPV status for a specific VSAN. |
vsan-id |
Vsan-id. The type is integer_range. The range is from 1 to 4093. |
show npv traffic-map [ { server-interface arg0 } ]
show |
Show running system information. |
npv |
Show Npv information. |
traffic-map |
Show information about Traffic Map. |
server-interface |
Show information about Traffic map for a server interface. |
arg0 |
Interface. The type is interface. The values are vfc, vfc-port-channel. |
show ntp authentication-keys
show |
Show running system information. |
ntp |
Show NTP information. |
authentication-keys |
Display authentication keys. |
show ntp authentication-status
show |
Show running system information. |
ntp |
Show NTP information. |
authentication-status |
NTP Authentication Status. |
show ntp peer-status
show |
Show running system information. |
ntp |
Show NTP information. |
peer-status |
Show the status for all the server/peers. |
show ntp peers
show |
Show running system information. |
ntp |
Show NTP information. |
peers |
Show all the peers.. |
show ntp statistics peer ipaddr arg0
show |
Show running system information. |
ntp |
Show NTP information. |
statistics |
Show the NTP statistics. |
peer |
Show the per-peer statistics counter of a peer.. |
ipaddr |
Peer's IP address. |
arg0 |
The type is string. A.B.C.D. |
show ntp trusted-keys
show |
Show running system information. |
ntp |
Show NTP information. |
trusted-keys |
Display trusted keys. |
show ospfv3 [{vrf {vrf-name | all}}] database [[[[router | network | intra-area-prefix | {inter-area {irouter | iprefix}} | nssa-external | area-unknown | [[{link | link-unknown | grace} [interface]]]][{area area-id-ip}]] | {external [{tag tag_val}]} | as-unknown] [lsid] [self-originated | {adv-router advid} | {adv-router-name adv-name} ]] [{vrf {vrf-name | all}}]
show |
Show running system information. |
ospfv3 |
Display OSPFv3 status and configuration. |
database |
Link-state Database Summary. |
router |
Display router LSAs. |
network |
Display network LSAs. |
intra-area-prefix |
Display Intra-Area-Prefix LSAs. |
inter-area |
Display inter-area LSAs. |
irouter |
Display Inter-Area-Router LSAs. |
iprefix |
Display Inter-Area-Prefix LSAs. |
nssa-external |
Display type 7 (NSSA external) LSAs. |
area-unknown |
Display area-scope unknown LSAs. |
link |
Display Link LSAs. |
link-unknown |
Display link-scope unknown LSAs. |
grace |
Display Grace LSAs. |
interface |
The type is interface. Display only LSA's on this Interface. |
area |
Display only LSA's in this area. |
area-id-ip |
The type is ipaddr. Area Id as an integer or ip address. |
external |
Display type 5 (external) LSAs. |
tag |
Restrict display by tag. |
tag_val |
The type is uinteger. 32-bit tag value. |
as-unknown |
Display as-scope unknown LSAs. |
lsid |
The type is ipaddr. Restrict display by link state ID. |
self-originated |
Display only self-originated LSAs. |
adv-router |
Restrict display by Advertising router. |
advid |
The type is ipaddr. Advertising router ID. |
adv-router-name |
Restrict display by Advertising router name. |
adv-name |
The type is string. DNS Name of the Advertising router. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name. |
all |
Display information for all VRFs. |
show ospfv3 [{vrf {vrf-name | all}}] database [[[[router | network | intra-area-prefix | {inter-area {irouter | iprefix}} | nssa-external | area-unknown | [[{link | link-unknown | grace} [interface]]]][{area area-id-ip}]] | {external [{tag tag_val}]} | as-unknown] [lsid] [self-originated | {adv-router advid} | {adv-router-name adv-name} ]] detail [{vrf {vrf-name | all}}]
show |
Show running system information. |
ospfv3 |
Display OSPFv3 status and configuration. |
database |
Link-state Database Summary. |
router |
Display router LSAs. |
network |
Display network LSAs. |
intra-area-prefix |
Display Intra-Area-Prefix LSAs. |
inter-area |
Display inter-area LSAs. |
irouter |
Display Inter-Area-Router LSAs. |
iprefix |
Display Inter-Area-Prefix LSAs. |
nssa-external |
Display type 7 (NSSA external) LSAs. |
area-unknown |
Display area-scope unknown LSAs. |
link |
Display Link LSAs. |
link-unknown |
Display link-scope unknown LSAs. |
grace |
Display Grace LSAs. |
interface |
The type is interface. Display only LSA's on this Interface. |
area |
Display only LSA's in this area. |
area-id-ip |
The type is ipaddr. Area Id as an integer or ip address. |
external |
Display type 5 (external) LSAs. |
tag |
Restrict display by tag. |
tag_val |
The type is uinteger. 32-bit tag value. |
as-unknown |
Display as-scope unknown LSAs. |
lsid |
The type is ipaddr. Restrict display by link state ID. |
self-originated |
Display only self-originated LSAs. |
adv-router |
Restrict display by Advertising router. |
advid |
The type is ipaddr. Advertising router ID. |
adv-router-name |
Restrict display by Advertising router name. |
adv-name |
The type is string. DNS Name of the Advertising router. |
detail |
Display LSA in detail. |
vrf |
Display per-VRF information. |
vrf-name |
The type is string. VRF name. |
all |
Display information for all VRFs. |
show [ipv6] ospfv3 interface { arg0 | { [ brief ] vrf { all | vrf-name } } }
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
ospfv3 |
Display OSPFv3 status and configuration. |
interface |
OSPFv3 enabled interface. |
arg0 |
Interface. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
brief |
Display summary of OSPFv3 interfaces. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show [ipv6] ospfv3 neighbors { arg0 [ { ip [ detail ] } | detail | summary ] [vrf { all | vrf-name } ] } | { [ { ip [ detail ] } | detail | summary ] vrf { all | vrf-name } }
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
ospfv3 |
Display OSPFv3 status and configuration. |
neighbors |
Neighbor list. |
ip |
Router ID of neighbor. The type is ipaddr. |
detail |
Show detailed neighbor display. |
arg0 |
Interface. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
summary |
Summary of neighbors. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show [ipv6] ospfv3 route [ summary | { ipv6-prefix [ longer-prefixes ] [ summary ] } | ipv6-addr ] vrf { all | vrf-name }
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
ospfv3 |
Display OSPFv3 status and configuration. |
route |
Internal OSPFv3 routes. |
ipv6-addr |
Show single OSPFv3 route. The type is ipv6. |
ipv6-prefix |
Show single exact match OSPFv3 route. The type is ipv6_prefix. |
summary |
Show route counts. |
longer-prefixes |
Show exact match and more specific routes. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show [ipv6] ospfv3 summary-address vrf { all | vrf-name }
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
ospfv3 |
Display OSPFv3 status and configuration. |
summary-address |
Summary-address redistribution information. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show [ipv6] ospfv3 traffic { arg0 | { vrf { all | vrf-name } } }
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
ospfv3 |
Display OSPFv3 status and configuration. |
traffic |
Packet counters. |
arg0 |
Interface. The type is interface. The values are ethernet, port-channel, vlan, loopback. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show [ipv6] ospfv3 vrf { all | vrf-name }
show |
Show running system information. |
ipv6 |
Display IPv6 information. |
ospfv3 |
Display OSPFv3 status and configuration. |
vrf |
Display per-VRF information. |
all |
Display information for all VRFs. |
vrf-name |
VRF name (Max Size 32). The type is string. |
show port-channel capacity
show |
Show running system information. |
port-channel |
Show port-channel information. |
capacity |
Capacity information. |
show port-channel database [ { interface if0 } ]
show |
Show running system information. |
port-channel |
Show port-channel information. |
database |
Show port-channel database. |
interface |
Specify a port-channel. |
if0 |
. The type is interface_mrange. The values are port-channel. |
show port-channel extended [ { interface if0 } ]
show |
Show running system information. |
port-channel |
Show port-channel information. |
extended |
Show port-channel extended. |
interface |
Specify a port-channel. |
if0 |
. The type is interface. The values are port-channel. |
show port-channel summary [ { interface if0 } ]
show |
Show running system information. |
port-channel |
Show port-channel information. |
summary |
Show port-channel summary. |
interface |
Specify a port-channel. |
if0 |
. The type is interface. The values are port-channel. |
show port-channel traffic [ { interface if0 } ]
show |
Show running system information. |
port-channel |
Show port-channel information. |
traffic |
Show port-channel traffic statistics. |
interface |
Specify a port-channel. |
if0 |
. The type is interface. The values are port-channel. |
show port-channel usage
show |
Show running system information. |
port-channel |
Show port-channel information. |
usage |
Show port-channel number usage. |
show porttrack
show |
Show running system information. |
porttrack |
Port Tracking. |
show processes
show |
Show running system information. |
processes |
Show processes. |
show processes cpu
show |
Show running system information. |
processes |
Show processes. |
cpu |
Show processes CPU Info. |
show processes cpu sort
show |
Show running system information. |
processes |
Show processes. |
cpu |
Show processes CPU Info. |
sort |
Show processes CPU Info (Sorted by Cpu Util). |
show processes memory
show |
Show running system information. |
processes |
Show processes. |
memory |
Show processes Memory Info. |
show ptp brief
show |
Show running system information. |
ptp |
Precision Time Protocol (IEEE 1588) Subsystem. |
brief |
PTP port states in brief. |
__readonly__ |
Read Only. |
TABLE_ptp |
ptp table. |
ptp-ifindex |
The type is string. ptp ifindex. |
state |
The type is string. ptp bmc state. |
ptp-end |
The type is string. End of table. |
show ptp clock
show |
Show running system information. |
ptp |
Precision Time Protocol (IEEE 1588) Subsystem. |
clock |
PTP local clock. |
__readonly__ |
Read Only. |
domain-id |
The type is integer. Domain Id. |
clock-id |
The type is string. Clock Id. |
priority1 |
The type is integer. Priority2. |
priority2 |
The type is integer. Priority2. |
num-ports |
The type is integer. Number of PTP ports. |
class |
The type is integer. Class. |
accuracy |
The type is integer. Clock accuracy. |
scaled-log-variance |
The type is integer. scaled log variance. |
offset-from-master |
The type is integer. Offset from master. |
mean-path-delay-to-master |
The type is integer. Mean path delay to master. |
steps-removed |
The type is integer. Steps removed. |
show ptp clock foreign-masters record [ { interface if0 } ]
show |
Show running system information. |
ptp |
Precision Time Protocol (IEEE 1588) Subsystem. |
clock |
PTP clock. |
foreign-masters |
foreign-masters. |
record |
record. |
interface |
Specify interface. |
if0 |
The type is interface. . The values are ethernet. |
__readonly__ |
Read Only. |
TABLE_ptp |
ptp table. |
interface-name |
The type is string. Interface name. |
clock-id |
The type is string. Clock Id. |
priority1 |
The type is integer. Priority2. |
priority2 |
The type is integer. Priority2. |
class |
The type is integer. Class. |
accuracy |
The type is integer. Clock accuracy. |
scaled-log-variance |
The type is integer. scaled log variance. |
steps-removed |
The type is integer. Steps removed. |
is-gm |
The type is integer. Is Grandmaster. |
ptp-end |
The type is string. End of table. |
show ptp corrections
show |
Show running system information. |
ptp |
Precision Time Protocol (IEEE 1588) Subsystem. |
__readonly__ |
Read Only. |
corrections |
Display last few corrections. |
TABLE_ptp |
ptp table. |
intf-name |
The type is string. interface name. |
sup-time |
The type is string. sup time. |
correction-val |
The type is integer. correction value. |
mean-path-delay |
The type is integer. mean path delay. |
ptp-end |
The type is string. End of table. |
show ptp counters { {interface if0} | all }
show |
Show running system information. |
ptp |
Precision Time Protocol (IEEE 1588) Subsystem. |
__readonly__ |
Read Only. |
counters |
Display PTP packet counters. |
interface |
Enter the port interface. |
all |
Displays all information. |
if0 |
The type is interface. . The values are ethernet. |
TABLE_ptp |
ptp table. |
interface_name |
The type is string. interface name. |
tx-announce-pkts |
The type is integer. No. of TX Announce Packets. |
tx-sync-pkts |
The type is integer. No. of TX Sync Packets. |
tx-follow-up-pkts |
The type is integer. No. of TX Follow-up Packets. |
tx-delay-req-pkts |
The type is integer. No. of TX Delay Request Packets. |
tx-delay-resp-pkts |
The type is integer. No. of TX Delay Response Packets. |
tx-pdelay-req-pkts |
The type is integer. No. of TX PDelay Request Packets. |
tx-pdelay-resp-pkts |
The type is integer. No. of TX PDelay Response Packets. |
tx-pdelay-follow-up-pkts |
The type is integer. No. of TX PDelay Follow-up Packets. |
tx-mgmt-pkts |
The type is integer. No. of TX PTP management Packets. |
rx-announce-pkts |
The type is integer. No. of RX Announce Packets. |
rx-sync-pkts |
The type is integer. No. of RX Sync Packets. |
rx-follow-up-pkts |
The type is integer. No. of RX Follow-up Packets. |
rx-delay-req-pkts |
The type is integer. No. of RX Delay Request Packets. |
rx-delay-resp-pkts |
The type is integer. No. of RX Delay Response Packets. |
rx-pdelay-req-pkts |
The type is integer. No. of RX PDelay Request Packets. |
rx-pdelay-resp-pkts |
The type is integer. No. of RX PDelay Response Packets. |
rx-pdelay-follow-up-pkts |
The type is integer. No. of RX PDelay Follow-up Packets. |
rx-mgmt-pkts |
The type is integer. No. of RX PTP management Packets. |
ptp-end |
The type is string. End of table. |
show ptp parent
show |
Show running system information. |
ptp |
Precision Time Protocol (IEEE 1588) Subsystem. |
parent |
PTP parent clock. |
__readonly__ |
Read Only. |
clock-id |
The type is string. Clock Id. |
port-num |
The type is integer. Port number. |
obs-parent-offset |
The type is string. observed parent offset. |
obs-parent-clk-phase-chg |
The type is string. observed parent clock phase change. |
gm-id |
The type is string. Grandmaster Id. |
gm-class |
The type is integer. Grandmaster class. |
gm-accuracy |
The type is integer. Clock accuracy. |
gm-scaled-log-variance |
The type is integer. scaled log variance. |
gm-priority1 |
The type is integer. GM Priority1. |
gm-priority2 |
The type is integer. GM Priority2. |
show publickey
show |
Show public key from certificate. |
publickey |
public key information. |
show radius-server [sorted | {groups [grp-name]}]
show |
Show Information. |
radius-server |
Radius-server. |
sorted |
Sorted server list. |
groups |
Radius server groups. |
grp-name |
Group Name. The type is string. |
show redundancy status
show |
Show running system information. |
redundancy |
Show system redundancy status. |
status |
Current redundancy status. |
show route-map [ strarg ]
show |
Show running system information. |
route-map |
Route-map information. |
strarg |
Route-map name (Max Size 100). The type is string. |
show san-port-channel database
show |
Show running system information. |
san-port-channel |
Show san-port-channel information. |
database |
Show san-port-channel database. |
show san-port-channel summary
show |
Show running system information. |
san-port-channel |
Show san-port-channel information. |
summary |
Show san-port-channel summary. |
show san-port-channel usage
show |
Show running system information. |
san-port-channel |
Show san-port-channel information. |
usage |
Show san-port-channel usage. |
show service copy info [ { group [ gid ] } | { destination [ { ip dip | dipv6 } { vnid dvnid | dvnidhex } ] } ]
show |
Show running system information. |
service |
Display service information. |
copy |
Display service copy information. |
info |
Display service copy information. |
group |
Display group information. |
destination |
Display destination information. |
ip |
ip address of destination. |
ipv6 |
ipv6 address of destination. |
vnid |
vnid address of destination. |
gid |
group number. The type is integer. The range is from 0 to 65535. |
dip |
The type is ipaddr. IP address. |
dipv6 |
The type is ipv6. IPv6 address. |
dvnid |
vnid number. The type is integer. |
dvnidhex |
vnid number. The type is hex. |
show service redir info [ { group [ gid ] } | { destination [ { ip dip | dipv6 } { vnid dvnid | dvnidhex } ] } ]
show |
Show running system information. |
service |
Display service information. |
redir |
Display service redirect information. |
info |
Display service redirect information. |
group |
Display group information. |
destination |
Display destination information. |
ip |
ip address of destination. |
vnid |
vnid address of destination. |
gid |
group number. The type is integer. The range is from 0 to 65535. |
dip |
The type is ipaddr. IP address. |
dipv6 |
The type is ipv6. IPv6 address. |
dvnidhex |
vnid number. The type is hex. |
dvnid |
vnid number. The type is integer. |
show snmp
show |
Show running system information. |
snmp |
Display SNMP information. |
show snmp community
show |
Show running system information. |
snmp |
Display SNMP information. |
community |
Display SNMP Community information. |
show snmp context
show |
Show running system information. |
snmp |
Display SNMP information. |
context |
Display SNMP Context information. |
show snmp engineID
show |
Show running system information. |
snmp |
Display SNMP information. |
engineID |
Show snmp engineID. |
show snmp host
show |
Show commands. |
snmp |
Show snmp internal information. |
host |
show snmp hosts. |
show snmp summary
show |
Show running system information. |
snmp |
Display SNMP information. |
summary |
Display SNMP Summary. |
show snmp user
show |
Show running system information. |
snmp |
Display SNMP information. |
user |
Display SNMP User information. |
show sprom { backplane | { module arg1 } | { fan arg0 } | { powersupply arg2 } | sup | stby-sup | all }
show |
Show running system information. |
sprom |
Show SPROM contents. |
all |
show all sproms contents. |
powersupply |
show powersupply sprom contents. |
module |
show linecard module sprom contents. |
fan |
show fan module sprom contents. |
stby-sup |
show stanby supervisor sprom contents. |
sup |
show supervisor sprom contents. |
backplane |
show backplane clock module sprom contents. |
arg0 |
please enter the fan number. The type is integer. The range is from 1 to 15. |
arg1 |
please enter the module number. The type is integer. The range is from 1 to 30. |
arg2 |
please enter the powersupply number. The type is integer. The range is from 1 to 10. |
show switchname
show |
Show running system information. |
switchname |
Show the system's hostname. |
show system error-id { list | i0 }
show |
Show running system information. |
system |
System-related show commands. |
error-id |
Show description about errors. |
list |
Show description about all error IDs. |
i0 |
The type is hex. Show description about specific error. The range is from 0x0 to 0xffffffff. |
show system mode
show |
Show running system information. |
system |
System-related commands. |
mode |
Show system mode. |
show system redundancy [ ha ] status
show |
Show running system information. |
system |
System-related show commands. |
redundancy |
Show system redundancy status. |
status |
Current redundancy status. |
ha |
Vdc redundancy status. |
show system reset-reason [ { module arg0 } ]
show |
Show running system information. |
system |
System-related show commands. |
reset-reason |
Show last reset reason. |
module |
Module. |
arg0 |
please enter the module number. The type is integer. The range is from 1 to 30. |
show system reset-reason fex fexid
show |
Show running system information. |
system |
System-related show commands. |
reset-reason |
Show last reset reason. |
fex |
Show fex last reset reason. |
fexid |
FEX number. The type is integer. The range is from 101 to 199. |
show system resources
show |
Show running system information. |
system |
System-related show commands. |
resources |
Show system resources. |
show system uptime
show |
Show running system information. |
system |
System information. |
uptime |
How long the system has been up. |
show tacacs-server [sorted | {groups [grp-name]}]
show |
Show Information. |
tacacs-server |
Tacacs-server. |
sorted |
Sorted server list. |
groups |
Tacacs server groups. |
grp-name |
Group Name. The type is string. |
show tech-support analytics brief
show |
Show running system information. |
tech-support |
Gather information for trouble shooting. |
analytics |
Show Policyelem tech-support information. |
brief |
Brief information. |
show users
show |
Show running system information. |
users |
Show users logged onto the system and their sessions. |
show version
show |
Show running system information. |
version |
Show running firmware version and basic system information. |
show version module [arg0]
show |
Show running system information. |
version |
Show the software version. |
module |
Module. |
arg0 |
please enter the module number. The type is integer. The range is from 1 to 30. |
show vlan [extended]
show |
Show running system information. |
vlan |
VLAN status. |
extended |
VLAN extended info like encaps. |
show vlan all-ports
show |
Show running system information. |
vlan |
VLAN status. |
all-ports |
Show all ports on VLAN. |
show vlan brief
show |
Show running system information. |
vlan |
VLAN status. |
brief |
All VLAN status in brief. |
show vlan fcoe [ vlan-id ]
show |
Show running system information. |
vlan |
VLAN status. |
fcoe |
FCOE Configuration. |
vlan-id |
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19. The type is integer_mrange. The range is from 1 to 4095. |
show vlan id vlan-id [extended]
show |
Show running system information. |
vlan |
VLAN status. |
id |
VLAN status by VLAN id. |
vlan-id |
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19. The type is integer_mrange. The range is from 1 to 4095. |
extended |
VLAN extended info like encaps. |
show vlan reserved [extended]
show |
Show running system information. |
vlan |
VLAN status. |
reserved | |
extended |
VLAN extended info like encaps. |
show vlan summary
show |
Show running system information. |
vlan |
VLAN status. |
summary |
VLAN summary information. |
show vpc [ { vpc-number | { brief [ { vpc vpc-number } ] } | { extended [ { vpc vpc-number } ] } } ]
show |
Show running system information. |
vpc |
Virtual Port Channel configuration. |
brief |
Brief display of vPC status. |
extended |
Extended display of vPC status. |
vpc-number |
Enter a Virtual Port Channel number. The type is integer. to 4096. The range is from 1 |
show vpc consistency-parameters { global | { interface if } | { vpc vpc-num } }
show |
Show running system information. |
vpc |
Virtual Port Channel configuration. |
consistency-parameters |
Show vPC Consistency Parameters. |
global |
Global Parameters. |
interface |
Specify interface. |
if |
. The type is interface. The values are port-channel. |
vpc-num |
Enter a Virtual Port Channel number. The type is integer. to 4096. The range is from 1 |
show vpc orphan-ports
show |
Show running system information. |
vpc |
Virtual Port Channel configuration. |
orphan-ports |
Show vPC orphan ports. |
show vpc peer-keepalive
show |
Show running system information. |
vpc |
Virtual Port Channel configuration. |
peer-keepalive |
vPC keepalive status. |
show vpc role
show |
Show running system information. |
vpc |
Virtual Port Channel configuration. |
role |
vPC role status. |
show vpc statistics peer-keepalive
show |
Show running system information. |
vpc |
Virtual Port Channel configuration. |
statistics |
Statistics. |
peer-keepalive |
peer keepalive module related statistics. |
show vpc statistics vpc vpc_num
show |
Show running system information. |
vpc |
Virtual Port Channel configuration. |
statistics |
Statistics. |
vpc_num |
Enter a Virtual Port Channel number. The type is integer. to 4096. The range is from 1 |
show vrf [vrf-name | all] [detail [extended]] [{order id}]
show |
Show running system information. |
vrf |
Display VRF information. |
vrf-name |
VRF name. The type is vrf_name. |
all |
Display VRF information for all VRFs. |
order |
Specify ordering. |
id |
Order by ID. |
detail |
Display VRF detail information. |
extended |
Display extended VRF information. |
show vrf [vrf-name | all ] interface [interface]
show |
Show running system information. |
vrf |
Display VRF information. |
vrf-name |
VRF name. The type is vrf_name. |
all |
Display VRF information for all VRFs. |
interface |
Display interface VRF information. |
interface |
Display interface VRF information. The type is interface. |
show vsan [ vsan-id ]
show |
Show running system information. |
vsan |
Show vsan information. |
vsan-id |
VSAN is range <1-4078>. The type is integer_range. The range is from 1 to 4078. |
show vsan [ vsan-id ] membership
show |
Show running system information. |
vsan |
Show vsan information. |
membership |
Show membership information. |
vsan-id |
VSAN is range <1-4078>. The type is integer_range. The range is from 1 to 4078. |
show vsan membership interface { arg0 }
show |
Show running system information. |
vsan |
Show vsan information. |
membership |
Show membership information. |
interface |
Show membership information for interface(s). |
arg0 |
Interface. The type is interface. The values are vfc, vfc-port-channel. |
show vsan usage
show |
Show running system information. |
vsan |
Show vsan information. |
usage |
Show vsan usage in the system. |
show zoning-filter [ { filter id } ]
show |
Show running system information. |
zoning-filter |
Display Zoning-Filter information. |
filter |
Display Zoning-Filter information using this Filter. |
id |
Filter ID/string. The type is string. |
show zoning-rule [ { src-epg epg0 } | { dst-epg epg1 } | { scope scopeId } | { filter filt } ]+
show |
Show running system information. |
zoning-rule |
Display Zoning-Rule information. |
src-epg |
Display Source EPG information. |
epg0 |
Source EPG number. The type is integer. The range is from 0 to 65535. |
dst-epg |
Display Destination EPG information. |
epg1 |
Destination EPG number. The type is integer. The range is from 0 to 65535. |
scope |
Display Rules for this Scope. |
scopeId |
Scope ID. The type is integer. The range is from 1 to 16777215. |
filter |
Display Rules using this Filter. |
filt |
Filter ID/string. The type is string. |